Sharp MX-B200 manual ID Card Copy, Press the ID Card key

ID CARD COPY

You can copy the front and reverse sides of ID card onto a page through this function. The ID card print image is shown as follows.

OriginalsCopies

Front

Back

•ID card copy feature cannot be used in combination with sort function.

		•	The following paper sizes can be used: A5R, A4, B5, 16K. (A5R can
			only be used in bypass tray.)
		•	The image may cut off even if using standard paper size.
		•	In ID card copy mode, scan area and scan number (1 page) cannot be		4
			changed. Scan area is:
			X: 54 + 5 mm (margin),
			Y: 86 + 10 mm (top margin 5 mm and bottom margin 5 mm).
		•	Only making a single copy is available (Number of copies cannot be
			set.).
1	Press the ID CARD key.
	•	The ID CARD indicator will light up. The
		exposure is set to "text", the exposure level is set
		to "3", and the number is set to "1" automatically.
	•	The multi-bypass tray is automatically selected
		when ID card copy feature is selected. The tray
		can be changed manually with the tray select key.
2	Place the ID card on the document glass,
	align with the ID card mark, and press the
	start ( ) key.
	When scan is finished, ID CARD indicator will blink
	and one side of the ID card is scanned into
	memory. (In this case, print will start if pressing
	READ-END key.)
				ID CARD mark
3	Turn and replace the ID card on the document glass, and press
	the start ( ) key.

When scan finished, Copy will begin.

To cancel ID card copy, press the clear key and make sure the ID CARD indicator is off.

34