Sharp MX-B200 manual Power off methods, Initial settings of operation panel

Page 8

Initial settings of operation panel

When the unit power is on, the operation panel will revert to the initial settings when the time set with the "Auto clear time" setting (p.63) elapses after a job is finished, or when the clear key is pressed twice.

The initial settings of the operation panel are shown below.				1

"0" is displayed in the display.

When copying has begun in this state, the settings in the following table are used.

Copy quantity	1 copy

Exposure adjustment	AUTO

Zoom	100%

Tray	Paper tray 1

Power off methods

If not used for a certain period of time, the unit will automatically enter auto power shut-off mode (p.61) in order to minimize power consumption. In cases where the machine will not be used for a long time, turn off the power switch and remove the power cord from the outlet.

8

Image 8

Contents MX-B200 Contents Introduction Conventions Used in this ManualPart Names Original cover Toner cartridgeOperation Panel Indicators on the Operation Panel Start indicatorPower save indicator Scan indicatorPower on About the scan headPower off methods Initial settings of operation panelLoading Paper PaperLoading the Paper Tray Gently push the paper tray back into the unit Multi-bypass tray Open the multi-bypass tray and extend the trayPress the tray select key to select the multi-bypass tray Paper must be fed narrow side into the feed slotInstalling the Software SoftwareMFP driver SharpdeskHardware and Software Requirements Installing the Software Double-click the Setup iconComputer and click the Next button Click the MFP Driver buttonSelect Connected to this When installing is finished, click the Close button Connect the machine to your computer with a USB cableThis completes the installation of the software Using the machine as a shared printer Select Connected via the network and click the Next buttonSelect the printer name configured as a shared printer You will return to the window of . Click the Close buttonConfiguring the Printer Driver Open the printer properties windowClick the OK button Setting UP Button ManagerClick the Sharp MX-xxxx icon and select Properties Page Copier Functions Copy FlowAbout interrupt copying Original PlacementUsing the document glass Document feeder tray Setting a large originalUsing the SPF Peripheral device SET the Copy Quantity Exposure ADJUSTMENT/PHOTO CopyingExposure adjustment Automatic exposure adjustment Press the tray select key REDUCTION/ENLARGEMENT/ZOOMSelecting the Tray Sort Copy Using the SPF Peripheral device Place the originals. p.27 If the memory becomes full ID Card Copy Press the ID Card keyPrinter Functions Basic PrintingClick the Print button Pausing a print jobMake sure that Sharp MX-xxxx is selected as the printer Opening the printer driver from the Start button Click the Sharp MX-xxxx printer driver iconSelect Properties from the Organize menu Click the Printing Preferences button in the General tabPrinter Driver Setting Screen Setting Advanced Print Functions Printing multiple pages on one page N-Up PrintingPrint results Left To Right Right To LeftFitting the printed image to the paper Fit To Paper Size Select the order of the pagesClick the Main tab in the printer driver setup screen Rotating the print image 180 degrees Rotate 180 degreesSelect the actual size of paper to be used for printing B5 Check the Rotate 180 degrees boxEnlarging/reducing the print image Zoom Select the zoom ratioBox Click the Advanced tab in the printer driver setup screenCheck the Text To Black box and/or the Vector To Black Page Adding a watermark to printed pages Watermark Saving Frequently Used Print Settings Saving settings at the time of printing User SettingsClick the OK button Using saved settings Deleting saved settingsOutline of the Print Status Window Printer Driver Features Application Place the original in the scanning position Scanner FunctionsScanning Overview Scanning Using the Keys on the Machine Application Application launched NumberPress the start Key Button Manager settings Button Manager scan menu factory defaultScan Setup area Set the scan conditions Outline of Button ManagerSelect Sharp MFP Twain Y, and click the Select button Scanning from Your ComputerScanning from a TWAIN-compliant application Scanning Source menu, select the location where you Placed the original in StepClick the Preview button Specify the scanning area and set the scan preferencesScanner driver settings Image Size button Preview screenRotate button Scanning from a WIA-compliant application Windows XP/Vista/7 Click the Scan buttonScanning from the Scanner and Camera Wizard Windows XP When scanning ends, the following Screen will appear. Select the next taskThat you wish to perform, and then click Next buttonSpecial Functions Description of Special FunctionsToner Save Mode Check original cover/SPF open functionManual PhotoSetting the user programs User ProgramsExample Total number of copies is 1,234 Press the light key to return to the normal copy modeDisplaying Total Number of Copies Checking the Toner Level Press the light Key to return to the normal displayMaintenance Toner Cartridge ReplacementLock release button Gently pull the toner cartridge outWhile pressing the lock release Button Page Document glass and the rear side of the original cover/SPF Cleaning the UnitCabinet Transfer charger Problem Possible cause Solution Troubleshooting the UnitMACHINE/COPYING Problems Problem Possible cause Solution Printing and Scanning Problems Problem Cause and solution Weight rangePrinting is slow Programs Printed image Rear side of the paper Is lightAlarm indicator, and take appropriate action You have not specified a suitable resolutionCover/SPF is dirty Original smudged or blotchyMachines power cord. Next, start your computer Scanner transfer For the USB 2.0 interface Hi-Speed modeUnable to scan Speed is slowProblems During Setup of the Software MFP driver cannot be installed Windows 2000/XP Removing the softwareStatus Indicators Indication Cause and remedyKey, 64 is displayed Seal is not still affixed Misfeed RemovalIndication Cause and remedy While pressing the start Misfeed in the paper feed area Misfeed in the fusing area Lower the fusing unit releaseFusing unit release lever LeverLower the fusing unit release lever Misfeed in the transport areaMisfeed in the lower paper feed area Peripheral device Open the front coverMisfeed in the SPF Peripheral device Press the copy ratio display % key Maintenance Required Developer RequiredSystem Configuration Optional EquipmentSingle Pass Feeder MX-SP10 Sheet Paper Feed Unit MX-CS10Interface cable USB interface cableOther Countries outside the EU Sharp Electronics Europe GmbH EN1

Related manuals

Manual 32 pages 56.91 Kb