Sharp MX-B200 manual Machines power cord. Next, start your computer, Unable to scan, Speed is slow

Page 76

Problem

Cause and solution

Page

 

 

 

 

If scanning is not possible, shut down your computer,

 

 

turn off the machine's power switch, and unplug the

 

 

machine's power cord. Next, start your computer,

–

 

restore power to the machine, and try scanning again.

 

 

 

If scanning is still not possible, check the following

 

 

items.

 

 

 

 

 

Your application is not TWAIN/WIA compliant.

 

 

→ If your application is not TWAIN/WIA compliant,

–

 

scanning will not be possible. Make sure your

 

 

Unable to scan the

application is TWAIN/WIA compliant.

 

 

 

image.

You have not selected the scanner driver of the

 

 

machine in your application.

–

 

→ Make sure that the machine's scanner driver is

 

 

 

selected in your TWAIN/WIA-compliant application.

 

 

 

 

 

You have not specified all scanning preferences

 

 

appropriately.

 

 

→ Scanning a large area at high resolution results in a

–

 

large amount of data and extended scanning times.

 

The scanning preferences should be set appropriately

 

 

for type of original to be scanned, i.e., Text, Text/

 

 

Graphics, Photograph.

 

 

 

 

 

Your computer does not meet the system requirements

 

Scanner transfer

for the USB 2.0 interface (Hi-Speed mode).

15, 64

→ See "HARDWARE AND SOFTWARE

speed is slow.

REQUIREMENTS" to configure your system as

 

 

 

 

required for USB 2.0, and check if "Hi-Speed" is set.

 

 

 

 

9

76

Page 75 Page 77
Image 76
Page 75 Page 77
Contents MX-B200 Contents Introduction Conventions Used in this ManualPart Names Original cover Toner cartridgeOperation Panel Indicators on the Operation Panel Start indicatorPower save indicator Scan indicatorPower on About the scan headPower off methods Initial settings of operation panelLoading Paper PaperLoading the Paper Tray Gently push the paper tray back into the unit Multi-bypass tray Open the multi-bypass tray and extend the trayPress the tray select key to select the multi-bypass tray Paper must be fed narrow side into the feed slotInstalling the Software SoftwareMFP driver SharpdeskHardware and Software Requirements Installing the Software Double-click the Setup iconSelect Connected to this Click the MFP Driver buttonComputer and click the Next button When installing is finished, click the Close button Connect the machine to your computer with a USB cableThis completes the installation of the software Using the machine as a shared printer Select Connected via the network and click the Next buttonSelect the printer name configured as a shared printer You will return to the window of . Click the Close buttonConfiguring the Printer Driver Open the printer properties windowClick the Sharp MX-xxxx icon and select Properties Setting UP Button ManagerClick the OK button Page Copier Functions Copy FlowUsing the document glass Original PlacementAbout interrupt copying Using the SPF Peripheral device Setting a large originalDocument feeder tray Exposure adjustment Exposure ADJUSTMENT/PHOTO CopyingSET the Copy Quantity Automatic exposure adjustment Selecting the Tray REDUCTION/ENLARGEMENT/ZOOMPress the tray select key Sort Copy Using the SPF Peripheral device Place the originals. p.27 If the memory becomes full ID Card Copy Press the ID Card keyPrinter Functions Basic PrintingMake sure that Sharp MX-xxxx is selected as the printer Pausing a print jobClick the Print button Opening the printer driver from the Start button Click the Sharp MX-xxxx printer driver iconSelect Properties from the Organize menu Click the Printing Preferences button in the General tabPrinter Driver Setting Screen Setting Advanced Print Functions Printing multiple pages on one page N-Up PrintingPrint results Left To Right Right To LeftFitting the printed image to the paper Fit To Paper Size Select the order of the pagesClick the Main tab in the printer driver setup screen Rotating the print image 180 degrees Rotate 180 degreesSelect the actual size of paper to be used for printing B5 Check the Rotate 180 degrees boxEnlarging/reducing the print image Zoom Select the zoom ratioCheck the Text To Black box and/or the Vector To Black Click the Advanced tab in the printer driver setup screenBox Page Adding a watermark to printed pages Watermark Saving Frequently Used Print Settings Saving settings at the time of printing User SettingsClick the OK button Using saved settings Deleting saved settingsOutline of the Print Status Window Printer Driver Features Scanning Overview Scanner FunctionsApplication Place the original in the scanning position Scanning Using the Keys on the Machine Application Application launched NumberPress the start Key Button Manager settings Button Manager scan menu factory defaultScan Setup area Set the scan conditions Outline of Button ManagerScanning from a TWAIN-compliant application Scanning from Your ComputerSelect Sharp MFP Twain Y, and click the Select button Scanning Source menu, select the location where you Placed the original in StepClick the Preview button Specify the scanning area and set the scan preferencesScanner driver settings Rotate button Preview screenImage Size button Scanning from a WIA-compliant application Windows XP/Vista/7 Click the Scan buttonScanning from the Scanner and Camera Wizard Windows XP When scanning ends, the following Screen will appear. Select the next taskThat you wish to perform, and then click Next buttonSpecial Functions Description of Special FunctionsToner Save Mode Check original cover/SPF open functionManual PhotoSetting the user programs User ProgramsDisplaying Total Number of Copies Press the light key to return to the normal copy modeExample Total number of copies is 1,234 Checking the Toner Level Press the light Key to return to the normal displayMaintenance Toner Cartridge ReplacementWhile pressing the lock release Button Gently pull the toner cartridge outLock release button Page Cabinet Cleaning the UnitDocument glass and the rear side of the original cover/SPF Transfer charger MACHINE/COPYING Problems Troubleshooting the UnitProblem Possible cause Solution Problem Possible cause Solution Printing and Scanning Problems Problem Cause and solution Weight rangePrinting is slow Programs Printed image Rear side of the paper Is lightAlarm indicator, and take appropriate action You have not specified a suitable resolutionCover/SPF is dirty Original smudged or blotchyMachines power cord. Next, start your computer Scanner transfer For the USB 2.0 interface Hi-Speed modeUnable to scan Speed is slowProblems During Setup of the Software MFP driver cannot be installed Windows 2000/XP Removing the softwareStatus Indicators Indication Cause and remedyIndication Cause and remedy While pressing the start Misfeed RemovalKey, 64 is displayed Seal is not still affixed Misfeed in the paper feed area Misfeed in the fusing area Lower the fusing unit releaseFusing unit release lever LeverLower the fusing unit release lever Misfeed in the transport areaMisfeed in the lower paper feed area Peripheral device Open the front coverMisfeed in the SPF Peripheral device Press the copy ratio display % key Maintenance Required Developer RequiredSystem Configuration Optional EquipmentSingle Pass Feeder MX-SP10 Sheet Paper Feed Unit MX-CS10Interface cable USB interface cableOther Countries outside the EU Sharp Electronics Europe GmbH EN1
Related manuals
Manual 32 pages 56.91 Kb
Top Page Image Contents