Sharp MX-B200 manual Problem Cause and solution, Printing is slow Programs, Uneven, Weight range

Page 74

Problem

Cause and solution

Page

 

 

 

 

 

 

Simultaneous use of two or more application software

 

 

Printing is slow.

programs.

–

 

→ Start printing after quitting all unused application

 

 

 

 

 

software programs.

 

 

 

 

 

 

 

The paper is loaded so that printing takes place on the

 

 

The printed image

rear side of the paper.

 

 

is light and

→ Some paper types have a front and rear side. If the

10

 

uneven.

paper is loaded so that printing takes place on the rear

 

 

side, toner will not adhere well to the paper and a good

 

 

 

 

 

 

image will not be obtained.

 

 

 

 

 

 

 

You are using paper that is outside the specified size

 

 

 

and weight range.

9

 

 

→ Use copy paper within the specified range.

 

 

 

 

 

 

 

Paper curled or damp.

 

 

 

→ Do not use curled or crimped paper. Replace with dry

 

 

 

copy paper. During periods when the machine is not

–

 

 

used for a long time, remove the paper from the tray

 

The printed image

 

 

and store it in a dark place in a bag to prevent moisture

 

 

is dirty.

absorption.

 

 

 

 

 

 

 

You did not set sufficient margins in the paper settings

 

 

 

of your application.

 

 

 

→ The top and bottom of the paper may be dirty if the

–

 

 

margins are set outside of the specified print quality

 

 

area.

 

 

 

→ Set the margins in the software application within the

 

 

 

specified print quality area.

 

 

 

 

 

 

 

The paper loaded in the tray is not the same size as

 

 

 

that specified in the printer driver.

 

 

 

→ Check if the "Paper Size" options suit the size of the

–

 

 

paper loaded in the tray.

 

 

→ If the "Fit To Paper Size" setting is activated, make sure

 

 

 

that the paper size selected from the drop-down list is

 

 

 

the same as the size of the loaded paper.

 

 

 

 

 

 

 

The orientation of document setting is not correct.

 

 

The printed image

→ Click the "Main" tab in the printer driver setup screen,

–

 

is skewed or it

and verify if the "Image Orientation" option is set to

 

 

your requirements.

 

 

runs off the paper.

 

 

 

 

 

 

Paper is not loaded properly.

10

 

 

→ Make sure the paper is properly loaded.

 

 

 

 

 

 

 

 

 

You did not correctly specify the margins for the

 

 

 

application in use.

 

 

 

→ Check the layout of the document margins and the

–

 

 

paper size settings for the application you are using.

 

9

 

Also check if the print settings are specified correctly to

 

 

suit the paper size.

 

 

 

 

The printed image

The setting for the print density is not appropriate.

 

→ You can adjust the print density on the printer driver.

 

 

is darker or lighter

Click the "Advanced" tab in the printer driver setup

–

 

than expected.

screen, and click the "Compatibility" button. Select the

 

 

 

"Print Density Level" from 1 (light) to 5 (dark).

 

 

 

 

 

 

74

Page 73 Page 75
Image 74
Page 73 Page 75
Contents MX-B200 Contents Introduction Conventions Used in this ManualPart Names Original cover Toner cartridgeOperation Panel Power save indicator Indicators on the Operation PanelStart indicator Scan indicatorPower on About the scan headPower off methods Initial settings of operation panelLoading Paper PaperLoading the Paper Tray Gently push the paper tray back into the unit Multi-bypass tray Open the multi-bypass tray and extend the trayPress the tray select key to select the multi-bypass tray Paper must be fed narrow side into the feed slotMFP driver Installing the SoftwareSoftware SharpdeskHardware and Software Requirements Installing the Software Double-click the Setup iconComputer and click the Next button Click the MFP Driver buttonSelect Connected to this When installing is finished, click the Close button Connect the machine to your computer with a USB cableThis completes the installation of the software Using the machine as a shared printer Select Connected via the network and click the Next buttonSelect the printer name configured as a shared printer You will return to the window of . Click the Close buttonConfiguring the Printer Driver Open the printer properties windowClick the OK button Setting UP Button ManagerClick the Sharp MX-xxxx icon and select Properties Page Copier Functions Copy FlowAbout interrupt copying Original PlacementUsing the document glass Document feeder tray Setting a large originalUsing the SPF Peripheral device SET the Copy Quantity Exposure ADJUSTMENT/PHOTO CopyingExposure adjustment Automatic exposure adjustment Press the tray select key REDUCTION/ENLARGEMENT/ZOOMSelecting the Tray Sort Copy Using the SPF Peripheral device Place the originals. p.27 If the memory becomes full ID Card Copy Press the ID Card keyPrinter Functions Basic PrintingClick the Print button Pausing a print jobMake sure that Sharp MX-xxxx is selected as the printer Select Properties from the Organize menu Opening the printer driver from the Start buttonClick the Sharp MX-xxxx printer driver icon Click the Printing Preferences button in the General tabPrinter Driver Setting Screen Print results Setting Advanced Print FunctionsPrinting multiple pages on one page N-Up Printing Left To Right Right To LeftFitting the printed image to the paper Fit To Paper Size Select the order of the pagesSelect the actual size of paper to be used for printing B5 Click the Main tab in the printer driver setup screenRotating the print image 180 degrees Rotate 180 degrees Check the Rotate 180 degrees boxEnlarging/reducing the print image Zoom Select the zoom ratioBox Click the Advanced tab in the printer driver setup screenCheck the Text To Black box and/or the Vector To Black Page Adding a watermark to printed pages Watermark Click the OK button Using saved settings Saving Frequently Used Print SettingsSaving settings at the time of printing User Settings Deleting saved settingsOutline of the Print Status Window Printer Driver Features Application Place the original in the scanning position Scanner FunctionsScanning Overview Scanning Using the Keys on the Machine Application Application launched NumberPress the start Key Button Manager settings Button Manager scan menu factory defaultScan Setup area Set the scan conditions Outline of Button ManagerSelect Sharp MFP Twain Y, and click the Select button Scanning from Your ComputerScanning from a TWAIN-compliant application Click the Preview button Scanning Source menu, select the location where youPlaced the original in Step Specify the scanning area and set the scan preferencesScanner driver settings Image Size button Preview screenRotate button Scanning from a WIA-compliant application Windows XP/Vista/7 Click the Scan buttonScanning from the Scanner and Camera Wizard Windows XP That you wish to perform, and then click When scanning ends, the followingScreen will appear. Select the next task Next buttonSpecial Functions Description of Special FunctionsManual Toner Save ModeCheck original cover/SPF open function PhotoSetting the user programs User ProgramsExample Total number of copies is 1,234 Press the light key to return to the normal copy modeDisplaying Total Number of Copies Checking the Toner Level Press the light Key to return to the normal displayMaintenance Toner Cartridge ReplacementLock release button Gently pull the toner cartridge outWhile pressing the lock release Button Page Document glass and the rear side of the original cover/SPF Cleaning the UnitCabinet Transfer charger Problem Possible cause Solution Troubleshooting the UnitMACHINE/COPYING Problems Problem Possible cause Solution Printing and Scanning Problems Printing is slow Programs Problem Cause and solutionWeight range Printed image Rear side of the paper Is lightCover/SPF is dirty Alarm indicator, and take appropriate actionYou have not specified a suitable resolution Original smudged or blotchyUnable to scan Machines power cord. Next, start your computerScanner transfer For the USB 2.0 interface Hi-Speed mode Speed is slowProblems During Setup of the Software MFP driver cannot be installed Windows 2000/XP Removing the softwareStatus Indicators Indication Cause and remedyKey, 64 is displayed Seal is not still affixed Misfeed RemovalIndication Cause and remedy While pressing the start Misfeed in the paper feed area Fusing unit release lever Misfeed in the fusing areaLower the fusing unit release LeverMisfeed in the lower paper feed area Peripheral device Lower the fusing unit release leverMisfeed in the transport area Open the front coverMisfeed in the SPF Peripheral device Press the copy ratio display % key Maintenance Required Developer RequiredSingle Pass Feeder MX-SP10 System ConfigurationOptional Equipment Sheet Paper Feed Unit MX-CS10Interface cable USB interface cableOther Countries outside the EU Sharp Electronics Europe GmbH EN1
Related manuals
Manual 32 pages 56.91 Kb
Top Page Image Contents