Sharp MX-B200 manual Maintenance, Toner Cartridge Replacement

Page 66

8	MAINTENANCE

This chapter describes how to replace the toner cartridge and how to clean the unit.

Be sure to use only genuine SHARP parts and supplies.

TONER CARTRIDGE REPLACEMENT

When the toner cartridge replacement required ( ) indicator lights up, replacement of the toner cartridge will be needed soon. Obtain a new cartridge. When the toner cartridge replacement required ( ) indicator blinks, the toner cartridge must be replaced before copying can be resumed. Replace the toner cartridge by following the procedure below.

• After the unit stops, it may be possible to make a few more copies by taking the toner cartridge out of the unit, shaking it horizontally, then reinstalling it. If copying is not possible after this operation, replace the toner cartridge.

•During long copy run of a dark original, the start ( ) indicator may blink, the indicator light up, and the unit stop, even though toner is left.

The unit will feed toner up to 2 minutes and then the start ( ) indicator will light up. Press the start ( ) key to restart copying.

1 Open the multi-bypass tray, and then open the side cover while pressing the side cover open button.

2	Push gently on both sides of the	8
	front cover to open the cover.

66

Image 66

Contents MX-B200 Contents Introduction Conventions Used in this ManualPart Names Original cover Toner cartridgeOperation Panel Power save indicator Indicators on the Operation PanelStart indicator Scan indicatorPower on About the scan headPower off methods Initial settings of operation panelLoading Paper PaperLoading the Paper Tray Gently push the paper tray back into the unit Multi-bypass tray Open the multi-bypass tray and extend the trayPress the tray select key to select the multi-bypass tray Paper must be fed narrow side into the feed slotMFP driver Installing the SoftwareSoftware SharpdeskHardware and Software Requirements Installing the Software Double-click the Setup iconClick the MFP Driver button Select Connected to thisComputer and click the Next button When installing is finished, click the Close button Connect the machine to your computer with a USB cableThis completes the installation of the software Using the machine as a shared printer Select Connected via the network and click the Next buttonSelect the printer name configured as a shared printer You will return to the window of . Click the Close buttonConfiguring the Printer Driver Open the printer properties windowSetting UP Button Manager Click the Sharp MX-xxxx icon and select PropertiesClick the OK button Page Copier Functions Copy FlowOriginal Placement Using the document glassAbout interrupt copying Setting a large original Using the SPF Peripheral deviceDocument feeder tray Exposure ADJUSTMENT/PHOTO Copying Exposure adjustmentSET the Copy Quantity Automatic exposure adjustment REDUCTION/ENLARGEMENT/ZOOM Selecting the TrayPress the tray select key Sort Copy Using the SPF Peripheral device Place the originals. p.27 If the memory becomes full ID Card Copy Press the ID Card keyPrinter Functions Basic PrintingPausing a print job Make sure that Sharp MX-xxxx is selected as the printerClick the Print button Select Properties from the Organize menu Opening the printer driver from the Start buttonClick the Sharp MX-xxxx printer driver icon Click the Printing Preferences button in the General tabPrinter Driver Setting Screen Print results Setting Advanced Print FunctionsPrinting multiple pages on one page N-Up Printing Left To Right Right To LeftFitting the printed image to the paper Fit To Paper Size Select the order of the pagesSelect the actual size of paper to be used for printing B5 Click the Main tab in the printer driver setup screenRotating the print image 180 degrees Rotate 180 degrees Check the Rotate 180 degrees boxEnlarging/reducing the print image Zoom Select the zoom ratioClick the Advanced tab in the printer driver setup screen Check the Text To Black box and/or the Vector To BlackBox Page Adding a watermark to printed pages Watermark Click the OK button Using saved settings Saving Frequently Used Print SettingsSaving settings at the time of printing User Settings Deleting saved settingsOutline of the Print Status Window Printer Driver Features Scanner Functions Scanning OverviewApplication Place the original in the scanning position Scanning Using the Keys on the Machine Application Application launched NumberPress the start Key Button Manager settings Button Manager scan menu factory defaultScan Setup area Set the scan conditions Outline of Button ManagerScanning from Your Computer Scanning from a TWAIN-compliant applicationSelect Sharp MFP Twain Y, and click the Select button Click the Preview button Scanning Source menu, select the location where youPlaced the original in Step Specify the scanning area and set the scan preferencesScanner driver settings Preview screen Rotate buttonImage Size button Scanning from a WIA-compliant application Windows XP/Vista/7 Click the Scan buttonScanning from the Scanner and Camera Wizard Windows XP That you wish to perform, and then click When scanning ends, the followingScreen will appear. Select the next task Next buttonSpecial Functions Description of Special FunctionsManual Toner Save ModeCheck original cover/SPF open function PhotoSetting the user programs User ProgramsPress the light key to return to the normal copy mode Displaying Total Number of CopiesExample Total number of copies is 1,234 Checking the Toner Level Press the light Key to return to the normal displayMaintenance Toner Cartridge ReplacementGently pull the toner cartridge out While pressing the lock release ButtonLock release button Page Cleaning the Unit CabinetDocument glass and the rear side of the original cover/SPF Transfer charger Troubleshooting the Unit MACHINE/COPYING ProblemsProblem Possible cause Solution Problem Possible cause Solution Printing and Scanning Problems Printing is slow Programs Problem Cause and solutionWeight range Printed image Rear side of the paper Is lightCover/SPF is dirty Alarm indicator, and take appropriate actionYou have not specified a suitable resolution Original smudged or blotchyUnable to scan Machines power cord. Next, start your computerScanner transfer For the USB 2.0 interface Hi-Speed mode Speed is slowProblems During Setup of the Software MFP driver cannot be installed Windows 2000/XP Removing the softwareStatus Indicators Indication Cause and remedyMisfeed Removal Indication Cause and remedy While pressing the startKey, 64 is displayed Seal is not still affixed Misfeed in the paper feed area Fusing unit release lever Misfeed in the fusing areaLower the fusing unit release LeverMisfeed in the lower paper feed area Peripheral device Lower the fusing unit release leverMisfeed in the transport area Open the front coverMisfeed in the SPF Peripheral device Press the copy ratio display % key Maintenance Required Developer RequiredSingle Pass Feeder MX-SP10 System ConfigurationOptional Equipment Sheet Paper Feed Unit MX-CS10Interface cable USB interface cableOther Countries outside the EU Sharp Electronics Europe GmbH EN1

Related manuals

Manual 32 pages 56.91 Kb