Selecting a Setting for a User Program

Sharp AR-M205, AR-M160 Selecting a Setting for a User Program, Base settings, Numeric keys

Page 48

USER SETTINGS

SELECTING A SETTING FOR A USER PROGRAM

1 Hold down the [Light] key (			) until		4 Enter the desired setting code by
	the alarm indicators ( , ,		,	,	pressing a numeric key.
		) blink.			• For the setting codes,
		"- -" appears in the			see "USER
		display.			PROGRAMS". (p.00 to
					p.00)
1	3	5			• The selected setting
1	3	5			code blinks.
					code blinks.
					• To select 90 seconds,
					press the [5] key.
2 Enter the program number with the					Note If you enter the wrong number, press the
2 Enter the program number with the					[CLEAR] key ( ) and return to step 2.

numeric keys.

• See "USER PROGRAMS" (p.00 to p.00) for the program numbers.

• The selected program number blinks.

• To select "Auto clear", press the [1] key.

If you enter the wrong number, press the

Note	[CLEAR] key (	) and then enter the correct
	[CLEAR] key (	) and then enter the correct
	number.

3 Press the [START] key ( ).

			• The selected program
START			number stops blinking
			and lights steadily.
			• The currently selected
			• The currently selected
			setting code blinks in
			setting code blinks in
			the 1st digit of the
			display.

5 Press the [START] key ().

The selected setting

STARTcode stops blinking and lights steadily.

To select a setting for another user program,

Note	press the [CLEAR] key (	) and then return
	press the [CLEAR] key (	) and then return
	to step 2.

6 Press the [Light] key ( ) to complete the settings.

The alarm indicators ( , , , , ) go off and the display returns to the number of copies display.

Audible signals (key entry beep, invalid key beep, base setting beep)

The machine sounds three different types of beep signals: a key entry beep that sounds when a valid key is pressed, an invalid key beep that sounds when an invalid key is pressed, and a base setting beep that sounds when a base setting is selected. The base setting beep is initially disabled. If you wish to enable the base setting beep, see "Base setting beep signal" on page 00. If you wish to change the volume of the beep signals or disable them, see "Audible signals volume" on page 00.

The beep patterns of each type of beep signal are as follows:

Key entry beep	One beep	Base setting beep	Three beeps
Invalid key beep	Two beeps

Base settings

The base settings are preset standard selections for each copy setting. The base settings are as follows:

Copy ratio	100%	ORIGINAL SIZE	8-1/2" x 11"
Light and Dark indicator	3	AUTO/TEXT/PHOTO	AUTO
Paper feed location	tray 1

Image 48

Contents

AR-M160 AR-M205For Your Records Contents User Settings Important Points When Selecting AN Installation Site Do not install your machine in areas that areChanges, e.g., near an Air conditioner orSafety precautions Trademark acknowledgementsDo not touch the photoconductive drum green portion Scratches or smudges on the drum will cause dirty copiesUsing the Manual Online Manual on the accessory CD-ROMEnvironmental Information Meaning of R in Original and Paper Size IndicationsSPF and Rspf Standard Features Conventions Used in this ManualInch series and AB series metric references Main Features Part Names and Functions ExteriorInterior Operation Panel Zoom indicator 26 SPR/RSPF indicator when the SPF/RSPF is installedAuto Image key/indicator Paper feed location/misfeed location indicatorsPower on and OFF Power onPower OFF Power Save ModesType of paper Type of media Size Weight Capacity Feeding Loading PaperPaper Special papersImportant points when inserting paper in the bypass tray Loading PaperLoading the paper tray Fan the paperLoading the bypass tray Unfold the bypass trayChanging a TRAY’S Paper Size Setting Use the Original Size Enter key to select the paper sizePress the Start key and then the Paper Size Enter key Original Placement Normal CopyingCopying from the document glass Open the document cover/SPF/RSPF, and place the originalSelect copy settings Copying from the SPF/RSPFPress the Start key to begin copying Set the originals face up in the document feeder tray Press the Start key and start copyingAuto tray switching Making a Copy Darker or LighterSelecting the Tray Original typesSetting the Number of Copies Important note when making a large number of copiesREDUCTION/ENLARGMENT/ZOOM Automatic Ratio SelectionSelecting a preset ratio Fine adjustment of the ratioManual Ratio Selection Press the Auto Image keyXY Zoom copying Press the Copy ratio display keyTWO-SIDED Copying Using the Bypass Tray Press the Start keyCopy original a Place original B as shown below Portrait-oriented originalInsert the paper all the way Copy is delivered to the output trayAutomatic TWO-SIDED Copying Using the document glass Using the SPF/RSPFIndicator blinks, and the original is scanned into memory Place originals in the SPF/RSPFPress a numeric key to enter the setting code Press the Original to Copy key to exit the settingImage Rotation in Duplex Copying Dual page Copying Interrupting a Copy RUN Press the Interrupt key to interrupt the copy runReplace the previous originals and press the Start key Rotating the Image 90 Degrees Sort Copy / Group CopySort/Group copy using the document glass Sort/Group copy using the SPF/RSPFPress the Start key and place the next original 1/4 in 1 copy using the document glass Desired modeCopying Multiple Originals Onto a Single Sheet of Paper Press the 2 in 1/4 in 1 key to select1/4 in 1 copy using the SPF/RSPF Setting the layout patternUse the 2 in 1/4 in 1 key to access the setting Select the setting code by pressing a numeric keyCreating Margins When Copying Place the originals Select the margin positionPress the Margin Shift key Press the 1 key or the 2 key, and then press the Start keySettings, and press the Start key Erasing Shadows around the Edges of a CopySelect the number of copies and other Using the Printer Mode Basic Procedure for PrintingMake sure that paper is loaded in the tray Using the Scanner Mode Scanning Using the Keys on the MachineScanning from Your Computer Scan Menu keys and the Button Manager scan menuPress a Scan Menu key to begin scanning Operation in COPY, PRINTER, and Scanner Modes During copyingPrinter During printing Scanner During scan previewAdjusting the Automatic Exposure Level Press the AUTO/TEXT/PHOTO key to complete the settingPlace the original. p.00 Enabling Toner Save Mode Photo indicator stops blinking and lights steadilyCustomizing Settings User Programs2 10 mm PatternLeft edge 300dpi 50%Minimum CopiesSelecting a Setting for a User Program Base settingsPress the Light key to complete the settings Enter the program number withSettings for Auditing Mode Auditing ModeAuditing Mode Settings Factory default settings Are indicated in bold EnablingSelecting Auditing Mode Settings Enter a setting for the selected programEnter the program number with the numeric keys Enabling/disabling auditing mode Account number deletionAccount number entry Account number changeResetting account Copying when auditing mode is enabledTroubleshooting This chapter describes troubleshooting and misfeed removalMACHINE/COPYING Problems Paper properly installed? Pieces of paper inside machine?Paper misfeed Is too much paper loaded in the tray? Do some sheets of paper stick together?Are any other indicators lit? Is an interrupt copy job in progress?Is the output tray full? Is the tray out of paper?Printing and Scanning Problems Printed image is lightPrinted image is dirty Is the orientation of document setting correct? Is the port setting correct?Has the printer driver been installed properly? Lines in tables are not alignedHave you specified a suitable resolution? Are the brightness and contrast settings suitable?Poor scanning quality Have you placed the original straight?Do you have Administrator rights? Is there enough computer memory?What to do when a notice page is printed Removing the softwareClick the start button, and then click Control Panel Click Add or Remove ProgramsIndicators and Display Messages Misfeed Removal Misfeed in the SPF/RSPFRemove the misfed original Section aMisfeed indicator Stops blinking and copying can be resumed Misfeed in the Bypass TraySection C Misfeed in the Machine Misfeed in the paper feed areaClose the front cover and side cover Misfeed in the fusing area Misfeed in the transport area Close the side cover by pressing the handle on the coverBe careful not to tear the misfed paper during removal Misfeed in Paper Tray Close the paper trayPush the paper tray in completely Open the side cover Close the side cover Remove the misfed paperBe careful not to tear Misfed paper during Removal Toner cartridge replacement required Indicator will go out Replacing the Toner CartridgeClose the front cover Discard the shutterChecking the Total Output Count and Toner Level Checking the Total Output CountTotal output count Total copy countRoutine Maintenance Cleaning the Document GLASS/SPF/RSPF and Document CoverChecking the Toner Level Press the Light key to return to the normal displayCleaning the Bypass Tray Paper Feed Roller Cleaning the Transfer ChargerSpecifications Peripheral DevicesSingle Pass Feeder Reversing Single Pass Feeder Specification Sheet Paper Feed Unit 250-SHEET Paper Feed UnitDual Function Board Part namesSupply Types and Storage Proper StorageStore the supplies in a location that is Store paper in the wrapper and lying flatSpecifications Printer Function Scanner Function Software License Page Index Page Page Page Sharp Corporation

Related manuals

Sharp AR-M205, AR-M160 Selecting a Setting for a User Program, Base settings, Numeric keys