Sharp AR-M160 Misfeed Removal, Misfeed in the SPF/RSPF, Remove the misfed original, Section a

Page 63

MISFEED REMOVAL

When a misfeed occurs, the misfeed indicator ( ) and a misfeed location indicator ( ) will blink and the machine will automatically stop.

Check the blinking misfeed location indicator to identify the location of the misfeed and remove it.

The paper may tear when you remove a misfeed. In this event, be sure to remove all torn pieces of paper from the Note machine, taking care not to touch the photoconductive drum (the green part). Any scratches or damage to the

surface of the drum will cause dirty copies.

Misfeed in the SPF/RSPF (p.00)

Misfeed in the bypass tray (p.00)

Misfeed in paper tray 1 (p.00)

Misfeed in paper tray 2 (p.00)

MISFEED IN THE SPF/RSPF

1 Remove the misfed original.

Check sections A, B, and C in the leftshows the illustration (see the next page), and remove the misfed original.

Section A

Open the feeding roller cover and remove the misfed original from the document feeder tray. Close the feeding roller cover.

Feeding roller cover

Section B

Open the SPF/RSPF and rotate the two release rollers in the direction of the arrow to feed the original out. Close the SPF/RSPF and then remove the original.

Roller6

If a small original (5-1/2" x 8-1/2", etc.) is misfed, or if an original misfeed occurs in the reversing tray of the RSPF (if installed), open the document conveyor cover and remove the original. Close the document conveyor cover.

Document conveyor cover

61

Image 63
Contents AR-M205 AR-M160For Your Records Contents User Settings Air conditioner or Important Points When Selecting AN Installation SiteDo not install your machine in areas that are Changes, e.g., near anScratches or smudges on the drum will cause dirty copies Safety precautionsTrademark acknowledgements Do not touch the photoconductive drum green portionMeaning of R in Original and Paper Size Indications Using the ManualOnline Manual on the accessory CD-ROM Environmental InformationSPF and Rspf Standard Features Conventions Used in this ManualInch series and AB series metric references Main Features Exterior Part Names and FunctionsInterior Operation Panel Paper feed location/misfeed location indicators Zoom indicator26 SPR/RSPF indicator when the SPF/RSPF is installed Auto Image key/indicatorPower Save Modes Power on and OFFPower on Power OFFSpecial papers Type of paper Type of media Size Weight Capacity FeedingLoading Paper PaperFan the paper Important points when inserting paper in the bypass trayLoading Paper Loading the paper trayUnfold the bypass tray Loading the bypass trayChanging a TRAY’S Paper Size Setting Use the Original Size Enter key to select the paper sizePress the Start key and then the Paper Size Enter key Open the document cover/SPF/RSPF, and place the original Original PlacementNormal Copying Copying from the document glassSelect copy settings Copying from the SPF/RSPFPress the Start key to begin copying Press the Start key and start copying Set the originals face up in the document feeder trayOriginal types Auto tray switchingMaking a Copy Darker or Lighter Selecting the TrayAutomatic Ratio Selection Setting the Number of CopiesImportant note when making a large number of copies REDUCTION/ENLARGMENT/ZOOMPress the Auto Image key Selecting a preset ratioFine adjustment of the ratio Manual Ratio SelectionPress the Copy ratio display key XY Zoom copyingPortrait-oriented original TWO-SIDED Copying Using the Bypass TrayPress the Start key Copy original a Place original B as shown belowCopy is delivered to the output tray Insert the paper all the wayAutomatic TWO-SIDED Copying Place originals in the SPF/RSPF Using the document glassUsing the SPF/RSPF Indicator blinks, and the original is scanned into memoryPress a numeric key to enter the setting code Press the Original to Copy key to exit the settingImage Rotation in Duplex Copying Dual page Copying Interrupting a Copy RUN Press the Interrupt key to interrupt the copy runReplace the previous originals and press the Start key Sort Copy / Group Copy Rotating the Image 90 DegreesSort/Group copy using the document glass Sort/Group copy using the SPF/RSPFPress the Start key and place the next original Press the 2 in 1/4 in 1 key to select 1/4 in 1 copy using the document glassDesired mode Copying Multiple Originals Onto a Single Sheet of PaperSelect the setting code by pressing a numeric key 1/4 in 1 copy using the SPF/RSPFSetting the layout pattern Use the 2 in 1/4 in 1 key to access the settingPress the 1 key or the 2 key, and then press the Start key Creating Margins When CopyingPlace the originals Select the margin position Press the Margin Shift keySettings, and press the Start key Erasing Shadows around the Edges of a CopySelect the number of copies and other Using the Printer Mode Basic Procedure for PrintingMake sure that paper is loaded in the tray Scanning Using the Keys on the Machine Using the Scanner ModeScanning from Your Computer Scan Menu keys and the Button Manager scan menuPress a Scan Menu key to begin scanning Scanner During scan preview Operation in COPY, PRINTER, and Scanner ModesDuring copying Printer During printingAdjusting the Automatic Exposure Level Press the AUTO/TEXT/PHOTO key to complete the settingPlace the original. p.00 Photo indicator stops blinking and lights steadily Enabling Toner Save ModeUser Programs Customizing Settings2 10 mm PatternLeft edge Copies 300dpi50% MinimumEnter the program number with Selecting a Setting for a User ProgramBase settings Press the Light key to complete the settingsFactory default settings Are indicated in bold Enabling Settings for Auditing ModeAuditing Mode Auditing Mode SettingsSelecting Auditing Mode Settings Enter a setting for the selected programEnter the program number with the numeric keys Account number change Enabling/disabling auditing modeAccount number deletion Account number entryCopying when auditing mode is enabled Resetting accountThis chapter describes troubleshooting and misfeed removal TroubleshootingMACHINE/COPYING Problems Do some sheets of paper stick together? Paper properly installed?Pieces of paper inside machine? Paper misfeed Is too much paper loaded in the tray?Is the tray out of paper? Are any other indicators lit?Is an interrupt copy job in progress? Is the output tray full?Printing and Scanning Problems Printed image is lightPrinted image is dirty Lines in tables are not aligned Is the orientation of document setting correct?Is the port setting correct? Has the printer driver been installed properly?Have you placed the original straight? Have you specified a suitable resolution?Are the brightness and contrast settings suitable? Poor scanning qualityIs there enough computer memory? Do you have Administrator rights?Click Add or Remove Programs What to do when a notice page is printedRemoving the software Click the start button, and then click Control PanelIndicators and Display Messages Section a Misfeed RemovalMisfeed in the SPF/RSPF Remove the misfed originalMisfeed indicator Stops blinking and copying can be resumed Misfeed in the Bypass TraySection C Misfeed in the Machine Misfeed in the paper feed areaClose the front cover and side cover Misfeed in the fusing area Misfeed in the transport area Close the side cover by pressing the handle on the coverBe careful not to tear the misfed paper during removal Misfeed in Paper Tray Close the paper trayPush the paper tray in completely Open the side cover Close the side cover Remove the misfed paperBe careful not to tear Misfed paper during Removal Discard the shutter Toner cartridge replacement required Indicator will go outReplacing the Toner Cartridge Close the front coverTotal copy count Checking the Total Output Count and Toner LevelChecking the Total Output Count Total output countPress the Light key to return to the normal display Routine MaintenanceCleaning the Document GLASS/SPF/RSPF and Document Cover Checking the Toner LevelCleaning the Transfer Charger Cleaning the Bypass Tray Paper Feed RollerSpecifications Peripheral DevicesSingle Pass Feeder Reversing Single Pass Feeder Part names SpecificationSheet Paper Feed Unit 250-SHEET Paper Feed Unit Dual Function BoardStore paper in the wrapper and lying flat Supply Types and StorageProper Storage Store the supplies in a location that isSpecifications Printer Function Scanner Function Software License Page Index Page Page Page Sharp Corporation
Related manuals
Manual 33 pages 13.5 Kb Manual 20 pages 22.01 Kb Manual 96 pages 12.14 Kb

AR-M205, AR-M160 specifications

The Sharp AR-M160 and AR-M205 are multifunctional copiers designed to meet the needs of small to medium-sized businesses. These models provide essential features that promote efficiency and productivity in any office environment. Both devices are equipped with advanced technologies that enhance their functionality and user-friendliness, making them ideal for daily document handling tasks.

One of the main features of the AR-M160 and AR-M205 is their impressive print and copy capabilities. The AR-M160 offers a print speed of up to 16 pages per minute, while the AR-M205 steps it up to an exceptional 20 pages per minute. This difference in speed can significantly impact workflow, especially in high-volume settings. Both models support a variety of paper sizes, including letter, legal, and A4, allowing users to manage diverse document tasks efficiently.

The AR-M160 and AR-M205 also provide excellent image quality, delivering sharp text and clear graphics. With a maximum print resolution of 1200 x 600 dots per inch, these machines ensure that every document produced is of professional quality. The advanced imaging technologies employed in these copiers, such as automatic exposure control and image processing, contribute to consistent and reliable results.

In terms of functionality, both the AR-M160 and the AR-M205 feature a user-friendly control panel that simplifies operation. The 7-inch color touchscreen provides intuitive navigation and easy access to various settings. Additionally, the devices support a range of finishing options, including stapling, hole-punching, and folding, allowing businesses to produce polished documents in-house.

Another notable characteristic of these models is their network connectivity. The AR-M160 and AR-M205 can be easily integrated into existing office networks, enabling users to print and scan documents from multiple devices. They support built-in network printing via Ethernet, as well as an optional wireless connection, ensuring flexibility and accessibility for all users.

Security is also a priority with these multifunction devices. They come equipped with various security features such as user authentication, secure print, and data encryption, which help protect sensitive information and ensure compliance with data protection regulations.

Overall, the Sharp AR-M160 and AR-M205 multifunction copiers embody reliability, efficiency, and high-quality output, making them valuable assets for any office environment. Their combination of advanced features, ease of use, and solid performance helps streamline document workflows and enhances productivity in today's fast-paced business world.