Display, Copy ratio display key, Zoom indicator

Sharp AR-M160 Display, Copy ratio display key, Zoom indicator, Zoom keys, Paper Size Enter key

Page 13

BEFORE USING THE MACHINE

ORIGINAL DATA

AUDIT CLEAR

AUTO PAPER SELECT

POWER SAVE

ZOOM

400%

INTERRUPT

SORT GROUP

EDGE ERASE CENTER

2 IN 1 4 IN 1

MARGIN SHIFT

AUTO

TEXT PHOTO

1 3 5

ORIGINAL PAPER

SIZE SIZE

11X17

8½X14

8½X11

8½X5½

8½X11

EXTRA

ORIGINAL SIZE	TRAY	AUTO
ENTER	SELECT	IMAGE

200%

141

129

121

100%

50%

PRESET RATIO

CLEAR

CLEAR ALL

START

READ-END

17Display

Shows the set number of copies, as well as the copy ratio, user program function or setting code, or an error code when an error occurs.

When the [SCAN] key is pressed to enter scan mode, the display shows the port used (U_1 for USB 1.1 or U_2 for USB 2.0). When Button Manager is used, the display shows a program number. (p.00, p00, p00)

18Copy ratio display key

Hold down when the machine is not in use to display the copy ratio in the copy quantity display. (p.00)

19ZOOM indicator

Lights up when a zoom ratio is set. (p.00)

20Zoom keys

Use to select any reduction or enlargement copy ratio from 25% to 400% in increments of 1%. (p.00)

21INTERRUPT key and indicator Interrupts a copy run. (p.00)

22Light and Dark keys/indicators

Use to adjust the TEXT or PHOTO exposure level. (p.00)

23ORIGINAL SIZE ENTER key/indicators Use to enter the original size. (p.00)

24PAPER SIZE indicators

Shows the selected copy paper size. (p.00)

25PAPER SIZE ENTER key

Use to set the paper size in the paper trays. (p.00)

26SPR/RSPF indicator (when the SPF/RSPF is installed)

Lights up when originals are set in the document feeder tray. (p.00)

27TRAY SELECT key

Use to manually select a paper tray. (p.00)

28AUTO IMAGE key/indicator

Press for automatic copy ratio selection. (p.00)

29Paper feed location/misfeed location indicators

The selected paper feed location is shown by a lit indicator ( ). (p.00)

The general location of misfed paper is shown by a

blinking red indicator ( ). (p.00)

30PRESET RATIO selector keys/indicators

Use to select preset reduction/enlargement copy ratios. (p.00)

31[ ] key

Use to check the total number of pages scanned. (p.00)

32Numeric keys

Use to select the desired copy quantity or to make user program entries. (p.00)

33READ-END key ( )

Use to check the total number of copies made (p.00). To begin printing copies after the original has been scanned for two-sided copying or other copy jobs that use the document glass. (p.00)

34START key

Press to make a copy (p.00). Also press to exit "Auto power shut-off" mode and to set a user program.

35CLEAR ALL key

Clears all selected settings and returns the machine to the initial settings. (p.00)

36CLEAR key

Clears the copy quantity display or terminates a copy run.

Image 13

Contents

AR-M205 AR-M160For Your Records Contents User Settings Do not install your machine in areas that are Important Points When Selecting AN Installation SiteChanges, e.g., near an Air conditioner orTrademark acknowledgements Safety precautionsDo not touch the photoconductive drum green portion Scratches or smudges on the drum will cause dirty copiesOnline Manual on the accessory CD-ROM Using the ManualEnvironmental Information Meaning of R in Original and Paper Size IndicationsConventions Used in this Manual SPF and Rspf Standard FeaturesInch series and AB series metric references Main Features Exterior Part Names and FunctionsInterior Operation Panel 26 SPR/RSPF indicator when the SPF/RSPF is installed Zoom indicatorAuto Image key/indicator Paper feed location/misfeed location indicatorsPower on Power on and OFFPower OFF Power Save ModesLoading Paper Type of paper Type of media Size Weight Capacity FeedingPaper Special papersLoading Paper Important points when inserting paper in the bypass trayLoading the paper tray Fan the paperUnfold the bypass tray Loading the bypass trayUse the Original Size Enter key to select the paper size Changing a TRAY’S Paper Size SettingPress the Start key and then the Paper Size Enter key Normal Copying Original PlacementCopying from the document glass Open the document cover/SPF/RSPF, and place the originalCopying from the SPF/RSPF Select copy settingsPress the Start key to begin copying Press the Start key and start copying Set the originals face up in the document feeder trayMaking a Copy Darker or Lighter Auto tray switchingSelecting the Tray Original typesImportant note when making a large number of copies Setting the Number of CopiesREDUCTION/ENLARGMENT/ZOOM Automatic Ratio SelectionFine adjustment of the ratio Selecting a preset ratioManual Ratio Selection Press the Auto Image keyPress the Copy ratio display key XY Zoom copyingPress the Start key TWO-SIDED Copying Using the Bypass TrayCopy original a Place original B as shown below Portrait-oriented originalCopy is delivered to the output tray Insert the paper all the wayAutomatic TWO-SIDED Copying Using the SPF/RSPF Using the document glassIndicator blinks, and the original is scanned into memory Place originals in the SPF/RSPFPress the Original to Copy key to exit the setting Press a numeric key to enter the setting codeImage Rotation in Duplex Copying Dual page Copying Press the Interrupt key to interrupt the copy run Interrupting a Copy RUNReplace the previous originals and press the Start key Sort Copy / Group Copy Rotating the Image 90 DegreesSort/Group copy using the SPF/RSPF Sort/Group copy using the document glassPress the Start key and place the next original Desired mode 1/4 in 1 copy using the document glassCopying Multiple Originals Onto a Single Sheet of Paper Press the 2 in 1/4 in 1 key to selectSetting the layout pattern 1/4 in 1 copy using the SPF/RSPFUse the 2 in 1/4 in 1 key to access the setting Select the setting code by pressing a numeric keyPlace the originals Select the margin position Creating Margins When CopyingPress the Margin Shift key Press the 1 key or the 2 key, and then press the Start keyErasing Shadows around the Edges of a Copy Settings, and press the Start keySelect the number of copies and other Basic Procedure for Printing Using the Printer ModeMake sure that paper is loaded in the tray Scanning Using the Keys on the Machine Using the Scanner ModeScan Menu keys and the Button Manager scan menu Scanning from Your ComputerPress a Scan Menu key to begin scanning During copying Operation in COPY, PRINTER, and Scanner ModesPrinter During printing Scanner During scan previewPress the AUTO/TEXT/PHOTO key to complete the setting Adjusting the Automatic Exposure LevelPlace the original. p.00 Photo indicator stops blinking and lights steadily Enabling Toner Save ModeUser Programs Customizing SettingsPattern 2 10 mmLeft edge 50% 300dpiMinimum CopiesBase settings Selecting a Setting for a User ProgramPress the Light key to complete the settings Enter the program number withAuditing Mode Settings for Auditing ModeAuditing Mode Settings Factory default settings Are indicated in bold EnablingEnter a setting for the selected program Selecting Auditing Mode SettingsEnter the program number with the numeric keys Account number deletion Enabling/disabling auditing modeAccount number entry Account number changeCopying when auditing mode is enabled Resetting accountThis chapter describes troubleshooting and misfeed removal TroubleshootingMACHINE/COPYING Problems Pieces of paper inside machine? Paper properly installed?Paper misfeed Is too much paper loaded in the tray? Do some sheets of paper stick together?Is an interrupt copy job in progress? Are any other indicators lit?Is the output tray full? Is the tray out of paper?Printed image is light Printing and Scanning ProblemsPrinted image is dirty Is the port setting correct? Is the orientation of document setting correct?Has the printer driver been installed properly? Lines in tables are not alignedAre the brightness and contrast settings suitable? Have you specified a suitable resolution?Poor scanning quality Have you placed the original straight?Is there enough computer memory? Do you have Administrator rights?Removing the software What to do when a notice page is printedClick the start button, and then click Control Panel Click Add or Remove ProgramsIndicators and Display Messages Misfeed in the SPF/RSPF Misfeed RemovalRemove the misfed original Section aMisfeed in the Bypass Tray Misfeed indicator Stops blinking and copying can be resumedSection C Misfeed in the paper feed area Misfeed in the MachineClose the front cover and side cover Misfeed in the fusing area Close the side cover by pressing the handle on the cover Misfeed in the transport areaBe careful not to tear the misfed paper during removal Close the paper tray Misfeed in Paper TrayPush the paper tray in completely Remove the misfed paper Open the side cover Close the side coverBe careful not to tear Misfed paper during Removal Replacing the Toner Cartridge Toner cartridge replacement required Indicator will go outClose the front cover Discard the shutterChecking the Total Output Count Checking the Total Output Count and Toner LevelTotal output count Total copy countCleaning the Document GLASS/SPF/RSPF and Document Cover Routine MaintenanceChecking the Toner Level Press the Light key to return to the normal displayCleaning the Transfer Charger Cleaning the Bypass Tray Paper Feed RollerPeripheral Devices SpecificationsSingle Pass Feeder Reversing Single Pass Feeder Sheet Paper Feed Unit 250-SHEET Paper Feed Unit SpecificationDual Function Board Part namesProper Storage Supply Types and StorageStore the supplies in a location that is Store paper in the wrapper and lying flatSpecifications Printer Function Scanner Function Software License Page Index Page Page Page Sharp Corporation

Related manuals

Sharp AR-M160 Display, Copy ratio display key, Zoom indicator, Zoom keys, Paper Size Enter key