SUPER
Serial Port1 Address/Serial Port2 Address
This option specifies the base I/O port addresses and Interrupt Request addresses of Serial Port 1 and Serial Port2. Select "Disabled" to prevent the serial ports from accessing any system resources. When this option is set to Disabled, the serial ports physically becomes unavailable. The op- tions are: "Enabled", and "Disabled."
The default setting for Serial Port1 is "Enabled". When "Enabled" is se- lected for Serial Port1, the address for Serial Port1 will be automatically set to 2F8/IRQ3.
The default setting for Serial Port2 is "Disabled". When "Disabled" is se- lected for Serial Port2, Serial Port2 will physically become unavailable.
!IDE Configurations Sub Menu
The screen for the Primary IDE Master is shown below.
When you select this Sub Menu, AMI BIOS automatically displays the status of the following items.
Device
Vendor
Size
LBA Mode
PIO Node
Async DMA
Ultra DMA
S. M. A. R. T