SMC Networks 1560 Product Specifications, Modbus Plus Specifications, General Specifications

Page 6

Chapter 1 — Product Specifications

Contents

1 Product Specifications

The ProSoft Technology, Inc. 1560-MBP card is a hardware product designed to be a communications front end for Allen- Bradley SCANport compatible products (1336 Plus/Force/ Vector, 1305, SMC Dialogue Plus, SMP3, etc.).

The product includes the following functionality:

1.1Modbus Plus Specifications

•Protocol modes:

Modbus Plus using licensed Schneider

Automation technology

•Supported Modbus Plus Operations: MSTR Type 1 - Write Data MSTR Type 2 - Read Data MSTR Type 5 - Write Global Data MSTR Type 6 - Read Global Data

•Supports Global Database Control from Host PLC In this mode, the 1560-MBP will look for Control Word and Reference in the selected Host Global Database

•Pre-assigned Modbus memory map

Read/Write

Command Control/Frequency

Datalinks Out : A to D

Up to 2000 drive parameter values

Read Only

Status/Feedback

Datalinks In : A to D

1.2General Specifications

•

•

Configuration via dip switches
Slave Address	:	1 to 64
Host Address	:	1 to 64

Global Database Control Enable Fault on Loss of Modbus Plus Enable SCANport Messaging Options

No Datalinks Datalinks A only Datalinks A and B only Datalinks A, B, C, D

Available packages:

Enclosed Power supplied externally (120 VAC) Enclosed Power supplied externally (24 VDC)

6

Image 6

Contents 1560 Table of Contents Please Read This Notice Quick Start Guide Step-by-StepRevisions General Specifications Product SpecificationsModbus Plus Specifications Configuration via dip switches Slave Address Host Address24 VDC Operating Temp To 50 C Storage Temp 40 to 85 C Supported Mstr Programming Commands Modbus Plus Port FunctionalityModbus Plus Communications Modbus Register Map Mstr Type 5 Write Global DataMBP Modbus Address Space Hardware Setup 1560-MBP Card Setup Connecting Power to the 1560-MBP CardDip Switch Configuration Switch SW Modbus Function Description Details Fault onLoss PlusSwitch SW 2 cont’d Contents Writing to the 1560-MBP Global Data Enabled Mstr Type Programming Considerations1560-MBP Global Data Modicon Programming Example Mstr Enable 40400 ActiveAbort Error 40410 SuccessHost Issued Write Commands Mstr Type Reading from the 1560-MBP Global Data Mstr TypeModicon Programming Example Mstr Type 40510 Host Issued Read Commands Mstr TypeEnable 40500 Active 0001040050 4006000020 MBP Status Registers 40021 to Modbus Name Values Description AddressBatch At this time Troubleshooting LED Troubleshooting TableLED Locations SCANport Mbpstat Diagnostics Cable Diagram TxRxD+Technical Support Technical Support ContactsAppendix a MBP Modbus Register MapMBP Modbus Appendix B Device Specific HintsSetting up the Adaptor I/O Data Logic Control Word Bit Function DescriptionDrive Status Word Bit Function Description Single Drive Peer Cop Application Example Hardware ConfigurationAppendix C OverviewSwitch Position Description Configuration Extension BlocksPLC REF Drive Status Ladder Logic Programming RefOffset DescriptionPLC Ref PLC Name Description Special Precautions and hints TimingAddressing HintsMounting Instructions Appendix DMounting and SCANport Cabling Instructions 70mmCable Requirements Appendix E SCANport Datalink OperationRepair and Warranty Service and RepairGeneral Warranty Policy Hardware Product Warranty Details Limitation of LiabilityContents