display the System Parameters Menu.
2.Site ID Message: (Up to 32 characters; Default = undefined) Type 1 and press [Enter],
the Site I.D. Prompt will appear. Key in the desired text and press [Enter] . To display the Site I.D., type /J [Enter]. The Site ID is also listed on the Port Status and Port Diagnostic Screens.
3.Supervisor Password: (Up to 32 characters; Default = undefined) Type 2 and press [Enter], a prompt will appear. Key in the desired password then press [Enter], the CMS will prompt you to
Note:
●The Supervisor Password is case sensitive. Make certain to note the exact password entered, including the case of each letter.
●Make certain to write down your Supervisor Password. If the password is lost or forgotten, you will not be able to access Supervisor Level commands unless you initialize the unit and clear all parameters as described in Section 4.3.
5.5.Port Configuration
5.5.1. Configuration Conventions
When responding to prompts, invoking commands, and selecting items from the port configuration menus, note the following:
●To select an item from a Port Configuration menu, key in the number for the item and press [Enter].
●To clear an item in a Port Configuration menu, enter the number for the desired item and press [Enter]. When the prompt appears, press [Space] and then press [Enter].
●When defining the Port Name, do not use the forward slash character (/), double quotes ("), the asterisk character (*), or blank spaces.
●Port Names cannot begin with a number.
●A Port cannot be named "N", this name is reserved for the Network Port.
●Refer to the instructions in each screen for additional functions available under that screen.