Display Port Status
Display Port Diagnostics
Display Network Status
Display Port
Parameters (Who)
Set System Parameters
Set Network Port Parameters
Set RS232 Port
Parameters
Copy RS232 Port Parameters
Connect
Resident
Disconnect (5)
Third Party
Disconnect (6)
Erase Buffer
Reset Network Port
Default & Test
Save Parameters
Upgrade Firmware
/S[P] [Enter] /SD [Enter] /SN [Enter]
/W[P] [n] [Enter]
/F [Enter] /N [Enter]
/P <x> [Enter]
/CP [Enter]
/C <x> [x] [Enter]
[Enter]+++[Enter]
/D[/Y] <x> [x] [Enter] /D[/Y] * [Enter]
/E[/Y] <x> [x] [Enter] /E[/Y] * [Enter]
/T [Enter]
/I[/Y] [Enter]
/U [Enter]
/UF [Enter]
X (1) (2) | X (1) | ||
X | (1) | X | (1) |
| X |
|
|
X | (2) | X | (3) |
X
X
X
X
XX (4)
X X
X
X
X
X
X
X
(1)Supervisor Mode displays parameters for all ports;
User Mode only displays parameters for the ports allowed by the Port Password.
(2)To display Port Passwords, include the "P" Option. (Supervisor Only).
(3)A port with "User" command capability can only view its own parameters. A User Port cannot view parameters for other ports.
(4)A User Port cannot perform a Third Party Connect.
(5)Resident Disconnect: Disconnects your resident port from another port. Note that the Resident Disconnect Sequence can be redefined via the Port Configuration Menus.
(6)Third Party Disconnect: Disconnects two or more nonresident ports. Must be issued from a third port with Supervisor command capability.