Western Telematic CMS-16 manual Port Diagnostics Screen /SD, Name Status, Mode BUF CTS, Rts

Page 36

currently connected to the CMS Network Port.

Mode: The user-selected Port Mode. This column will read Any (Any-to-Any), Modem, Passive, or Buffer, depending on the configuration selected for the port.

Buffer Count: Lists the amount of data (in bytes) stored in the buffer for this port.

6.2. The Port Diagnostics Screen (/SD)

The Port Diagnostics Screen provides more detailed information about each port, including the port name and communication parameters. To display the Port Diagnostics Screen, access the command mode and type /SD [Enter], the screen will appear as shown in Figure 6.2.

Like the Port Status Screen, the Port Diagnostics Screen is also available to both Supervisors and Users, and will appear slightly differently, depending upon whether the command mode was accessed with the Supervisor Password or a Port Password (User Mode).

In User Mode, the Port Diagnostics Screen will display only the status of those ports that share the same Port Password that was entered at login. Ports that are protected by other passwords will not be displayed.

PORT

DIAGNOSTICS:

Version 1.02

Site

ID: (undefined)

 

 

 

 

PORT

NAME

STATUS

BAUD

COM

HS

MODE BUF

CTS

-----+

------------------

+--------

+------

+-----

+

-----

+------

+

-----

+

-----

01+

(undefined)

*Free

9600

8N1

RTS

Any

0

H

02+

(undefined)

*Free

9600

8N1

RTS

Any

0

L

03+

(undefined)

*Free

9600

8N1

RTS

Any

0

L

04+

(undefined)

*Free

9600

8N1

RTS

Any

0

L

05+

(undefined)

*Free

9600

8N1

RTS

Any

0

L

06+

(undefined)

*Free

9600

8N1

RTS

Any

0

L

07+

(undefined)

*Free

9600

8N1

RTS

Any

0

L

08+

(undefined)

*Free

9600

8N1

RTS

Any

0

L

 

 

 

 

 

09+

(undefined)

*Free

9600

8N1

RTS

Any

0

L

10+

(undefined)

*Free

9600

8N1

RTS

Any

0

L

11+

(undefined)

*Free

9600

8N1

RTS

Any

0

L

12+

(undefined)

*Free

9600

8N1

RTS

Any

0

L

13+

(undefined)

*Free

9600

8N1

RTS

Any

0

L

14+

(undefined)

*Free

9600

8N1

RTS

Any

0

L

15+

(undefined)

*Free

9600

8N1

RTS

Any

0

L

16+

(undefined)

*Free

9600

8N1

RTS

Any

0

L

Enter /H for Command Menu

Figure 6.2: The Port Diagnostics Screen (Defaults Shown)

As shown in Figure 6.2, the Port Diagnostics Screen lists the following items:

Image 36
Contents CMS-16 Nameplate Power Warning Battery ReplacementRack Mount Installation Table of Contents Page Appendices List of FiguresIntroduction Unit Description Front PanelTypographic Conventions Power Cable Receptacle Power Switch Back PanelUsing Other Parameters for this Overview Optional Getting StartedCommunication Parameters Apply Power to the CMS System SetUp PortsConnecting your PC to the CMS Communicating with the CMS UnitCommand Menu Display Configuration ControlPort Name Password StatusHardware Installation Connecting Power to the CMS UnitConfigure Option Switches AC Powered UnitsDC Powered Units Default Baud Rate Sw1, Sw2, Sw3 Default Handshake Sw4, Sw5Initialize Unit to Default Settings Default Response Message Format Sw6Default Command Echo Sw7 Connecting Devices to the CMS Application ExampleCMS Application Example Not to Scale Configuration Access to the CMS Command Mode$ telnet 192.1.1.1 Enter Password Functions Supervisor PasswordDefining the Site ID and Supervisor Password Port PasswordsPort Configuration Configuration Conventions3. RS232 Port Configuration Menus Port ModesPort Parameters #02 CTS/RTSStop Bits Default = Parameters #02ATZ AT&C1$D2S0=1 Network Port Configuration Menu Network Parameters Telnet Port ParametersPage Implementing IP Security IP SecurityPage Copying Parameters to All Ports Copy Port ParametersStatus Screens Save User Selected ParametersPort Status Screen /S Status Mode Buffer Count Port Status Screen Supervisor Mode, Defaults ShownPort Diagnostics Screen /SD DiagnosticsMode BUF CTS Name StatusNetwork Status Screen /SN Port Parameters Screens /W Network Status LAN StatusTelnet Port Status CMSPort Parameters #03 RTS/CTSAny-to-Any Mode OperationPort Connection and Disconnection Disconnecting Ports Enter Defining Hunt Groups Hunt Group ExamplePassive Mode Buffer ModeReading Data from Buffer Mode Ports Xx EnterModem Mode Port BuffersSaving and Restoring Configuration Parameters Sending Parameters to a FileRestoring Saved Parameters Upgrading CMS Firmware Command Reference Guide Command ConventionsCommand Response Command Summary Terse VerboseWP n Enter Command Set Enter Enter Command ModeEnter+++Enter Resident Disconnect Sequence ConnectFormat /C x x Enter CP Copy RS232 Port ParametersFormat /CP Enter Third Party DisconnectFormat /D/Y x x Enter 2 Enter or /D/Y 3 EnterErase Buffer Format /E/Y x x EnterDefault and Test HelpDisplay Site ID Set Network Port Parameters Set RS232 Port ParametersDisplay Port Status SD Display Port Diagnostics Reset Network PortSN Display Network Status Save ParametersUF Upgrade Firmware Exit Command ModeFormat /UF Enter Display Port Parameters WhoAppendix B. Specifications Appendix A. RS232 Port InterfaceFormat /X Enter Appendix C. Customer Service PowerStop Bits 1 or Trademark and Copyright Information Trademarks Used in this Manual
Related manuals
Manual 59 pages 31.71 Kb