Configuring Users
level
The access that a user is allowed:
z
z
z
z
password
The password the user will need to enter to login to the IOLAN. This
line-access
Specifies the user access rights to each IOLAN device line. Options are:
z
zRead
The onoff option is only for
service
The type of service that the user will use.
sess-timer
The amount of time, in seconds, that the Session Timer will run. Use this timer to forcibly close a user’s session (connection). When the Session Timer expires, the IOLAN will end the connection. The default value is 0 (zero), meaning that the session timer will not expire (the session is open permanently, or until the user logs out). The maximum value is 4294967 seconds. The User Session Timer will override the Line Session Timer, with the exception of reverse Telnet sessions.
port
When the User Service is Telnet, this is the target port number. The default value will change based on the type of Service selected; the most common known port numbers are used as the default values.
36 | IOLAN DS1/TS2 CLI Reference Guide, Version 4.1 |