Perle Systems 5500208-41 Lock, Modem-name, Motd, Nouser, Pages, Parity, Reset, Send-name

Line Commands

lock

When enabled, the user can lock his terminal with a password using the Hotkey Prefix (default Ctrl-a) ^a l (lowercase L). The IOLAN prompts the user for a password and a confirmation.

mode

Enables/disables the line (available only on the TS2 model). The default is enabled.

modem-name

The name of the predefined modem that is used on this line.

motd

Enables/disables the message of the day on the line.

nouser

Blanks out the User parameter, in case you want to change a dedicated user line to an undedicated line.

pages

For DSLogin line service, this is the number of video pages the terminal supports. Valid values are 1-7. The default is 5 pages.

parity

Specifies if you are using Even, Odd, or No parity on the line. If you want to force a parity type, you can specify Mark for 1or Space for 0.

phone-number

The phone number to use when Connection Method is set to Dial Out.

reset

Resets the terminal type connected to the line when a user logs out.

rev-sess-security

Enables/disables login/password authentication, locally or externally, on reverse Telnet connections. The default is Off.

send-name

When enabled, the port name will be sent to the host upon session initiation.

Default: Disabled

session strings

Controls the sending of ASCII strings to serial devices at session start and session termination as follows;

zSend at Start—If configured, this string will be sent to the serial device when the serial device is detected (i.e. signals come up). The maximum size of this field is 128 bytes/characters.

zSend at End—If configured, this string will be sent to the serial device when the TCP session on the LAN is terminated. The maximum size of this field is 128 bytes/characters

zDelay after Send—If configured, will inset a delay( in milliseconds) after the string is sent to the device. This delay can be used to provide the serial device with time to process the string before the session is initiated or terminated.

Default: 10 ms

42 IOLAN DS1/TS2 CLI Reference Guide, Version 4.1