PI
SA
SNMP Preferences Screen |
| iConverter, Serial Agent |
| ||
Chassis Number | = 1 | SNMP Engine ID 80001CAE03000687003B19 | |||
1: sysContact |
| Omnitron (949) |
|
| |
2: sysLocation |
| Irvine, CA USA |
|
| |
3: SNMP Writes |
| Enabled |
|
|
|
SNMP v1/v2c |
|
|
|
| |
4: Read Community | ***** |
|
|
| |
5: Write Community | ***** |
|
|
| |
6: Agent |
| Enabled |
|
|
|
SNMP V3 |
|
|
|
| |
7: Agent |
| Enabled |
|
|
|
8: User 1 name (read only) | guest |
|
|
| |
9: User 2 name (read/write) | admin |
|
|
| |
10: User 1 Security | noAuthNoPriv 13: User 2 Security | noAuthNoPriv | |||
11: User 1 Privacy pwd | ***** | 14: User 2 Privacy pwd | ***** | ||
12: User 1 Authen. pwd | ***** | 15: User 2 Authen. pwd | ***** | ||
Traps Hosts |
|
|
|
| |
16: Address 1 | 255.255.255.255 | 20: Address 5 | 255.255.255.255 | ||
17: Address 2 | 255.255.255.255 | 21: Address 6 | 255.255.255.255 | ||
18: Address 3 | 255.255.255.255 | 22: Address 7 | 255.255.255.255 | ||
19: Address 4 | 255.255.255.255 | 23: Address 8 | 255.255.255.255 | ||
Enter Choice, Management Options Screen(0), (H)elp, E(x)it >
3.4.2.1Setting SNMPv1/v2c Read and Write Community Names
The 2FXM2 is shipped from the factory with the SNMP agent enabled with the default SNMP Read and Write Community name as “public”. See Section 3.4 for all factory default settings.
The SNMP Read Community Name is necessary for reading data from the 2FXM2. The name can be any
The SNMP Write Community Name is necessary for writing data to the 2FXM2. The name can be any
To save the new values, select 0 and press <ENTER> to return to the Management Options screen, then select 6 and press <ENTER> to Save Preference Changes.
3.4.2.2Setting SNMPv3 Parameters
SNMPv3 implements a security model that provides for message integrity, authentication, and encryption.
Authentication for SNMPv3 is provided through a unique User Name and Authentication Password for each access level.
Two access levels or accounts are available;
The module supports the three levels of Authentication and Encryption (Security Levels) for User 1 and User 2; noAuthNoPriv, authNoPriv and authPriv. noAuthNoPriv uses username for authentication,
Page 16