4.3PORT CONFIGURATION
The Port configuration screen provides access to the port level configuration parameters, such as, Port Access, Bandwidth Control, L2CP Control, SFP information, 802.3ah, Port VLANs, Tagged VLANs and cNode Loopback. To access the Port configuration screen, select C from the Module configuration screen and press <ENTER>. The Port configuration screen will appear.
PI
Module - iConverter 2FXM2 |
|
| iConverter, Serial Agent | |||
Identifier - |
|
|
|
|
|
|
Chassis Number | = 1 | Port Access Control Setup |
| |||
Slot Number | = 1 |
|
|
| ||
Model Number | = | 11: Port 1 Enable |
| On | ||
|
| 12: Port 2 Enable |
| On | ||
Feature Selection |
|
|
|
|
| |
| Port VLAN Path Setup |
| ||||
1: 802.1Q Processing Enable Off |
|
|
| |||
|
| 13: Port 1 to Port 2 | Enable | On | ||
2: Configure Tag VLAN Control | 14: Port 1 to BP A | Enable | On | |||
3: Configure VLAN Membership | 15: Port 1 to BP B | Enable | On | |||
4: Save TAG VLAN parameters | 16: Port 2 | to BP A | Enable | On | ||
5: Configure 802.3ah parameters | 17: Port 2 | to BP B | Enable | On | ||
6: Configure 802.3ah events | 18: BP A |
| to BP B | Enable | On | |
7: SFP Information | 19: Port 1 | to Mngmnt | Enable | On | ||
8: Bandwidth Control | 20: Port 2 | to Mngmnt | Enable | On | ||
9: L2CP Control |
| 21: BP A |
| to Mngmnt | Enable | On |
10: cNode Loopback |
| 22: BP B |
| to Mngmnt | Enable | On |
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
SA
Module - iConverter 2FXM2 | iConverter, Serial Agent | |||
Identifier - Host |
|
|
|
|
Chassis Number | = 1 | Port Access Control Setup |
| |
Slot Number | = 1 |
| ||
Model Number | = | 11: Port 1 Enable |
| On |
|
| 12: Port 2 Enable |
| On |
Feature Selection |
|
|
| |
Port VLAN Path Setup |
| |||
1: 802.1Q Processing Enable | Off |
| ||
|
| 13: Port 1 to Port 2 | Enable | On |
2: Configure Tag VLAN Control | 14: Port 1 to Mngmnt | Enable | On | |
3: Configure VLAN Membership | 15: Port 2 to Mngmnt | Enable | On | |
4: Save TAG VLAN parameters |
|
|
| |
5: Configure 802.3ah parameters
6: Configure 802.3ah events
7: SFP Information
8: Bandwidth Control
9: L2CP Control
10: cNode Loopback
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
Page 26