Omnitron Systems Technology 2FXM2 user manual Verify Operation

When the upload is complete, the 2FXM2 displays the update status and then automatically restarts with the newly loaded firmware.

3.4.4.4Updating the 2FXM2 Firmware via FTP

Using an FTP application, upload the new firmware into the FTP root directory of the 2FXM2. When the file transfer is complete, the 2FXM2 verifies the file and then automatically restarts with the newly loaded firmware.

For detailed instructions on updating the management modules and other modules in the same chassis via FTP, download the application note “iConverter Management: Updating Modules via FTP” available on Omnitron’s web page:

http://www.omnitron-systems.com/downloads.php

See Setting 2FXM2 Passwords Section 3.4.1.4, on how to configure FTP.

3.5VERIFY OPERATION

PI

SA

Once the module has been installed and configured, per Sections 3.2 - 3.4, verify the module is operational by viewing the status of the LED indicators. The table below provides a description for each LED indicator.

The Power LED indicates the modules is receiving power from the chassis or power cord. The plug-in modules has an LED indicator for each available power supply in the chassis (the 19-Module Chassis has three, the 5-Module Chassis has two).

The Fiber Optic LEDs (“P1” and “P2”) indicate the fiber optic connection has been established. A blinking LED indicates the presence of data.

Refer to Section 6.0, Troubleshooting Guide, for help in determining possible fault conditions.

PI

SA

PI

SA

LED Function	Color	Off State	On / Blinking State	On / Blinking State
"Legend"
Power "Pwr"	Green	No power	On: Module has power	On: Module has power
Power Supply Status		Chassis Power	On: Power available from
	Green		installed Power Supply #X	Not available on standalone
#X		Supply not installed	Blinking: No power available
			from installed Power Supply #X
Port 1			On: Fiber link is active	On: Fiber link is active
Fiber Link Activity	Green	No Fiber Link
			Blinking: Fiber Data Activity	Blinking: Fiber Data Activity
"P1"
Port 1
Half/Full Duplex	Green	Half-Duplex	On: Full-Duplex	On: Full-Duplex
"FDX"
Chassis Management		Chassis Slave	On: Chassis Master
Master/Slave	Green		Blinking: Operating in OAM	Not available on standalone
		Mode
"Msr/Slv"			Mode
Port 2			On: Fiber link is active	On: Fiber link is active
Fiber Link Activity	Green	No Fiber Link
			Blinking: Fiber Data Activity	Blinking: Fiber Data Activity
"P2"
Port 2
Half/Full Duplex	Green	Half-Duplex	On: Full-Duplex	On: Full-Duplex
"FDX"

Page 21