Omnitron Systems Technology 2FXM2 user manual Detailed Module Configuration, Nmm

Page 22

4.0DETAILED MODULE CONFIGURATION

4.1OVERVIEW

PI

SA

The 2FXM2 has module parameters that require configuration depending on the application. The Module configuration screen is accessible by selecting the module slot number from the Chassis View screen. To access the Module configuration menu, select 1 at the Management Options screen, press <ENTER>. The Chassis Selection screen will be displayed. From the Chassis Selection screen, select the chassis number where the 2FXM2 module is installed.

NOTE: Module configuration is also available using NetOutlook.

PI

Chassis Selection

iConverter, Serial Agent

Number

Chassis Name

 

1NMM

2Not Available

3Not Available

4Not Available

5Not Available

6Not Available

7Not Available

8Not Available

9Not Available

10Not Available

11Not Available

12Not Available

13Not Available

14Not Available

15Not Available

16Not Available

17Not Available

18Not Available

19Not Available

Connected to Chassis Number 1

Chassis Number(1-19), Management Options(0), (H)elp, E(x)it > 1

Page 22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Standalone and PLUG-IN Module Table of Contents Overview Plug-InPort Structure Installation Procedure B B B B B B BThese DIP-switches are for factory use only 1.5 SW5 Fiber Port 2 Full/Half Duplex FDX/HDX DIP-switch Bank 2 is only available on the plug-in module Installing PLUG-IN Modules and Connecting Cables Passwords Management Options screen will be displayed 2FXM2 Setting the Chassis Number and Name Setting 2FXM2 Passwords Setting Snmp Preferences Setting SNMPv1/v2c Read and Write Community Names Setting the Snmp Trap IP Host Addresses Enabling/Disabling Soft-switch Reload Access the 2FXM2 Remotely Updating the 2FXM2 Firmware via the Serial Console Port Verify Operation Detailed Module Configuration NMM2FXM2 LED Module Management Mode Port Configuration Port Access To change the ingress rate of the Port 1, select option SFP Information 5 802.3ah Parameters Local Status Section OUI 6 802.3ah Events Port Vlan Off Tagged Vlan BP B PvidBP a BP B Vlan ID VIDVlan Table is Empty Vlan ID +1 Vlan ID CNode Loopback To refresh the Port Statistic screen, press Enter 2FXM2 Specifications Cable TypesTroubleshooting Guide Possible CausesWarranty Limitation of Warranty
Top Page Image Contents