4.3.11Port Statistics
The 2FXM2 module provides port statistics on both Port 1 and Port 2.
The Port Statistics can be viewed by selecting option P from the Module configuration screen.
PI
Module - iConverter 2FXM2 | iConverter, Serial Agent |
| |||||
Identifier - |
|
|
|
|
|
|
|
Chassis Number | = 1 | Switch ON condition | OFF condition | H/W | Actual | ||
Slot Number | = | 11 | 1: Pause Enabled | Pause Disabled | Off | Off | |
Model Number | = | 2: Port 1 HDX | Port 1 FDX | Off | Off | ||
|
|
| 3: Not Available |
|
|
|
|
Serial Number | = xxxxxxxx | 4: Not Available |
|
|
|
| |
Manufacturing Date = xxxxxxxx | 5: Port 2 HDX | Port 2 FDX | Off | Off | |||
Product Revision | = xx | 6: Link Propagate | Link Segment | Off | Off | ||
Software Revision | = xx | 7: Remote Fault | Normal | Off | Off | ||
|
|
| 8: Symm Fault Det | Normal | Off | Off | |
LED |
|
| 9: BP A Enabled | BP A Disabled | Off | Off | |
1: Power | = On | 10: BP B Enabled | BP B Disabled | Off | Off | ||
2: Power Supply 1 | = Off | 11: Not Available |
|
|
|
| |
3: Power Supply 2 | = Off | 12: Slave Only | Master/Slave | Off | Off | ||
4: Power Supply 3 | = Off | 13: Not Available |
|
|
|
| |
5: Port 1 Link | = Off | 14: Not Available |
|
|
|
| |
6: Port 1 FDX | = Off | 15: Not Available |
|
|
|
| |
7: BP Master | = Off | 16: Not Available |
|
|
|
| |
8: Port 2 Link | = Off | OAM settings: |
|
|
|
| |
9: Port 2 FDX | = Off | 17: IP protocol State | On |
|
| ||
|
|
| 18: Management Mode | Secure OAM |
|
| |
Toggle |
| ||||||
|
|
|
|
|
|
|
|
PI
SA
Port Statistic |
|
|
Module - iConverter 2FXM2 | iConverter, Serial Agent | |
Identifier - |
|
|
Chassis Number | = 1 |
|
Slot Number | = 1 |
|
Model Number | = |
|
Port Statistics
| Port 1 | Port 2 |
Rx Bytes | 0 | 0 |
Rx Packets | 0 | 0 |
Rx Total Packets | 0 | 0 |
Tx Bytes | 0 | 0 |
Tx Packets | 0 | 0 |
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
To refresh the Port Statistic screen, press <ENTER>.
Page 42