Omnitron Systems Technology 2FXM2 user manual Vlan ID VID, BP a BP B, Vlan Table is Empty

Page 38

4.3.9VLAN Membership Table

The VLAN Membership Table lists the permitted VLAN ID (VID) for each egress port on the module. Only packets that are assigned a VID value that matches one of the egress port’s VID memberships are allowed to egress through the port.

When the Ingress Security is set to High for a specific port, the membership table is used to list the VIDs of the packets that are allowed to ingress that port.

VLAN Membership is accessed by selecting option 3 from the Port configuration screen. The VLAN Membership screen will be displayed.

PI

VLAN Membership - iConverter 2FXM2

iConverter, Serial Agent

 

Identifier -

 

 

 

 

 

 

Chassis Number = 1

Slot Number = 1

Model Number = 8959N-0

 

 

 

VLAN ID (VID)

Port 1

Port 2

BP A

BP B

Mngmnt

 

VLAN TABLE IS EMPTY

 

 

 

 

 

 

Add new entry (a), Delete entry (d), Edit entry (e), Clear table (c)

 

Enter Choice, Previous Screen(0), (H)elp, E(x)it >

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SA

 

 

 

 

 

 

 

 

 

 

VLAN Membership - iConverter 2FXM2

iConverter, Serial Agent

 

Identifier -

 

 

 

 

 

 

Chassis Number = 1

Slot Number = 1

Model Number = 8959N-0

 

 

 

VLAN ID (VID)

Port 1

Port 2

Mngmnt

 

 

 

VLAN TABLE IS EMPTY

 

 

 

 

 

Add new entry (a), Delete entry (d), Edit entry (e), Clear table (c)

Enter Choice, Previous Screen(0), (H)elp, E(x)it >

Page 38

Image 38
Contents Standalone and PLUG-IN Module Table of Contents Overview Plug-InPort Structure Installation Procedure B B B B B B BThese DIP-switches are for factory use only 1.5 SW5 Fiber Port 2 Full/Half Duplex FDX/HDX DIP-switch Bank 2 is only available on the plug-in module Installing PLUG-IN Modules and Connecting Cables Passwords Management Options screen will be displayed 2FXM2 Setting the Chassis Number and Name Setting 2FXM2 Passwords Setting Snmp Preferences Setting SNMPv1/v2c Read and Write Community Names Setting the Snmp Trap IP Host Addresses Enabling/Disabling Soft-switch Reload Access the 2FXM2 Remotely Updating the 2FXM2 Firmware via the Serial Console Port Verify Operation Detailed Module Configuration NMM2FXM2 LED Module Management Mode Port Configuration Port Access To change the ingress rate of the Port 1, select option SFP Information 5 802.3ah Parameters Local Status Section OUI 6 802.3ah Events Port Vlan Off Tagged Vlan BP B PvidVlan Table is Empty Vlan ID VIDBP a BP B Vlan ID +1 Vlan ID CNode Loopback To refresh the Port Statistic screen, press Enter 2FXM2 Specifications Cable TypesTroubleshooting Guide Possible CausesWarranty Limitation of Warranty