Omnitron Systems Technology 2FXM2 user manual Table of Contents

	Table of Contents
1.0	Overview	3
1.1	General Description	3
1.1.1	Advanced Features	3
2.0	Port Structure	4
2.1	Overview	4
2.1.1	Management Port	4
2.1.2	Fiber Ports	4
2.1.3	Backplane Ethernet Ports	4
3.0	Installation Procedure	5
3.1	Overview	5
3.2	Configuring DIP-switches	5
3.2.1	Board-Mounted Bank 1 Settings	6
3.2.2	Board-Mounted Bank 2 Settings	8
3.3	Installing Plug-in Modules and Connecting Cables	9
3.4	Configure the Module via Command Line Interface	10
3.4.1	Setting IP and Control Preferences	12
3.4.2	Setting SNMP Preferences	15
3.4.3	Enabling/Disabling Soft-switch Reload	18
3.4.4	Access the 2FXM2 Remotely	19
3.5	Verify Operation	21
4.0	Detailed Module Configuration	22
4.1	Overview	22
4.2	Module Management Mode	25
4.3	Port Configuration	26
4.3.1	Port Access	27
4.3.2	Bandwidth Control	27
4.3.3	Layer 2 Control Protocol Filter	28
4.3.4	SFP Information	29
4.3.5	802.3ah Parameters	30
4.3.6	802.3ah Events	33
4.3.7	Port VLAN	34
4.3.8	Tagged VLAN	36
4.3.9	VLAN Membership Table	38
4.3.10	cNode Loopback	41
4.3.11	Port Statistics	42
5.0	2FXM2 Specifications	43
6.0	Troubleshooting Guide	44
6.1	Overview	44
6.1.1	Power Issues	44
6.1.2	Fiber Issues	44
7.0	Warranty	45

Page 2