Chapter 3 - Software Loading and Configuration
Installing Your V.90 Modems (Windows 2000)
Follow the procedures below to install your V.90 modems in a Windows 2000 operating system.
1.Click Start Settings Control Panel Phone and Modems option.
2.The Location Information dialog box is displayed. Note: This is for
Enter the appropriate location information and click OK.
3.The Phone and Modem Options dialog box is displayed. Click on the Modems tab.
Click Add.
4. The Add/Remove Hardware Wizard dialog box is displayed.
Check (click) the “Don’t detect my modem; I will select it from a list.” option and then clickNext >.
MT4X56USB | 31 |