Multi-Tech Systems MT4X56USB manual Introduction, Features, MultiModemUSB User Guide

Page 6

MultiModemUSB User Guide

Introduction

The MultiModemUSB, model MT4X56USB, is a Universal Serial Bus (USB) Concentrator that contains four full-featured V.90 modems and a USB port which allows additional MultiModemUSBs to be daisy-chained together. These features allow any system running Windows 95/98, Windows NT 4.0, or Windows 2000 and equipped with a USB port to quickly and easily add modems four at a time, using MultiModemUSBs, without opening the case. The modems can be used for virtually any existing datacomm application including Remote Access Service, dial-out, Internet proxy services, business Internet services, or multiple-modem client communications.

Using Microsoft or other third-party software, users on the same network as the USB host can share modems, gain Internet access, and double or even triple bandwidth by using more than one modem simultaneously with Multi-Link PPP bonding. The MT4X56USB includes a complete set of Internet business applications. The four dual-mode 56 Kbps modems support the new ITU V.90 standard and offer backward compatibility with K56flex. They support Class 1 and Class 2 fax, MNP 3 or 4 and V.42 error correction, along with MNP 5 and V.42bis data compression. Complete data and fax softwar e plus a large compilation of Internet applications are included on a CD ROM from TUCOWS. The CD includes client/server software for email, web hosting, FTP servers, news servers/clients, and web browsers.

The MT4X56USB modem concentrator is designed to operate efficiently in V.90 communication links, address the needs of newer datacomm applications and preserve the investment users have in legacy systems. Each modem is equipped with remote configuration to configure modems anywhere in the network, flash memory for firmware upgrades, DTMF tone detection, and three-number storage for automatic dialing.

®

Four USB V.90 Modems

 

RD TD CD TR

RD TD CD TR

RD TD CD TR

RD TD CD TR

Hub

System

 

 

Port 1

Port 2

Port 3

Port 4

 

 

 

 

 

 

 

 

 

 

 

Figure 1-1. MT4X56USB

Features

Four built-in V.90/56 Kbps modems

USB interface for easy installation

Hot-swappable with other USB devices without restarting or reconfiguring your PC

Operating support for Windows 95, Windows 98, Windows NT 4.0, and Windows 2000.

Supports Class 1 and Class 2 faxing at 14.4 Kbps

Supports U.S Caller ID reporting

Allows administrators to set up and configure remote concentrators

A small footprint and stackable design

Stores up to three phone numbers

Supports Plug-and-Play operation under Windows 95, Windows 98, and Windows 2000

Includes data communications, fax, voice, TUCOWS Top 100 Internet applications CD-ROM

Upgrades easily with built-in flash memory

Full-service, two-year warranty

6

MT4X56USB

Image 6
Contents MultiModemUSB Model MT4X56USB User GuidePatents User GuideRecord of Revisions TrademarksContents Glossary of Terms Index Introduction and Description Features IntroductionMultiModemUSB User Guide Preview of this Guide Technical SpecificationsInstallation Introduction and DescriptionRelated Documentation Hub Front PanelModem Ports Ports 1, 2, 3, SystemUSB Type B Downstream Connector RJ-ll Modem ConnectorUSB Type a Upstream Connector Power ConnectorInstallation Safety Warning Telecom UnpackingInstallation Cabling your MT4X56USBMT4X56USB Software Loading and Configuration System USB Support Loading your Driver SoftwareMT4X56USB Drivers for Windows Software Loading and Configuration Uninstalling MultiModemUSB in Windows MT4X56USB Drivers for Windows Uninstalling MultiModemUSB in Windows MultiModemUSB Drivers Install dialog box displays Click Next MT4X56USB Drivers for Windows NTUninstalling MultiModemUSB in Windows NT Select Add/Remove ProgramsAdd/Remove MT4X56USB Drivers for Windows Click Finish Software Loading and Configuration Select Add/Remove Hardware Installing Your V.90 Modems Click Start Settings Control Panel ModemsRead Carefully Software Loading and Configuration MT4X56USB Installing Your V.90 Modems Windows Click Start Settings Control Panel Phone and Modems optionMT4X56USB Software Loading and Configuration Windows 95/98 Configuration Utility MT4X56USB Windows NT 4.0/2000 Configuration Utility MT4X56USB MT4X56USB AT Commands, S-Registers and Result Codes Repeat Last Command AT Command SummaryCommand Enter Key AnswerAT Commands, S-Registers and Result Codes Information Request Return Online to Data ModeResult Codes Enable/Disable Modulation HandshakeTone Dialing Modem ResetLoad Factory Settings Result Code FormatTest Commands Communications ModeAsynchronous Communications Mode Display Current SettingsCommand &Zy=x Store Dialing Command Store Current ConfigurationSelect Stored Configuration for Hard Reset \An Select Maximum MNP Block Size\Kn Break Control \Nn Error Correction Mode Selection\Tn Inactivity Timer \Qn Flow Control SelectionEnter Setup Password Command %DCn AT Command ControlCommand %En Fallback and Fall Forward Control Command #S=x Store Setup PasswordCommand +++ATCR Escape Sequence Command %%%ATCRRemote Configuration Escape SequenceRegister Unit Range Default Description RegistersS38 Upstream data ratesResult Codes Terse Verbose DescriptionFor more information on scripting, click the Help button Remote Configuration Remote Configuration Procedure SetupChanging the Setup Password Remote Configuration Commands Remote Configuration and ManagementChanging the Remote Escape Character MT4X56USB Troubleshooting None of the Indicators Light Modem Does Not Respond to CommandsModem Dials But Cannot Connect Troubleshooting Modem Disconnects While OnlineModem Doesn’t Work with Caller ID Modem Cannot Connect When AnsweringLoopback Tests Fax and Data Software Can’t Run at the Same TimeTest procedure Local Analog Loopback Test V.54 LoopRemote Digital Loopback Test V.54 Loop Remote digital loopback testLocal Digital Loopback Test V.54 Loop Local digital loopback testInstalling Microsoft USB Support Windows 95/98 TroubleshootingDetermining Why USB Support Is Not Present Double-click the Universal Serial Bus Controller iconUpgrade Procedure Identify the Current Firmware Version Upgrade OverviewIdentify the MT4X56USB Firmware Multi-Tech Web SiteUpgrade Procedure Download the Upgrade FileExtract the Upgrade Files Clear Your Stored ParamentersUpgrade the Modem’s Firmware Restore Your ParametersService, Warranty and Tech Support Software User License Agreement Service, Warranty and Tech Support Limited WarrantyOn-line Warranty Registration Tech SupportService Contacting Tech Support via E-mailAppendices FCC Part Appendix a Regulatory InformationClass B Statement Industry CanadaFCC Part 68 Telecom AppendicesFAX Branding Statement Canadian Limitations NoticeNew Zealand Telecom Warning Notice EMC, Safety and Terminal Directive ComplianceCommission Decision CTR21 International Modem RestrictionsTroubleshooting Appendix B V.90 SupportIntroduction Glossary of Terms MT4X56USB Glossary MT4X56USB Glossary MT4X56USB Glossary MT4X56USB Glossary MT4X56USB Glossary MT4X56USB Glossary MT4X56USB Index IndexConfiguration MT4X56USB Software user license agreement Speed