LevelOne WPS 0100, WPS-100USB manual Windows using Ndps, Ndps Manager Client

Page 25

Windows using NDPS

Before using NetWare NDPS (NetWare Distributed Printing Service), one or more NDPS Printer Agents must be created on the NetWare Server. See Appendix B for details of this procedure.

Also, on your workstation, ensure that:

Novell IntranetWare Client v2.2 (or later) is installed on your PC.

You have access to the Novell Printer Manager utility (e.g. Nwpmw32.exe).

Procedure

1.Start the Novell Printer Manager utility.

2.Select Printer - New from the menu, then click Add.

3.Select the required printer and click Install, then Close.

Figure 8: NDPS Manager - Client

4.The printer (e.g. SerPrinter in the example above) appears in the main Printer Manager window in the Name list, and is available for print jobs. Printer drivers are automatically downloaded from the server as required.

5.The printer will appear in your Windows printer list, and may be used from by any Windows application.

Page 22

Image 25
Contents User Guide Table of Contents Appendix a Specifications TroubleshootingAppendix B Network Server Configuration Introduction FeaturesSafety Instructions Models Package ContentsWPS-0100 LAN LED Diagnostic Push Button LED IndicatorsTo restore the factory default settings To generate a Diagnostic print outPage Procedure LAN InstallationCheck the LEDs Using the Windows Wizard ConfigurationProcedure LevelOne Printer ServerAlternatives to the Windows Wizard Wireless ConfigurationIf the desired LevelOne Printer Server is not listed Quickset Advanced Configuration and ManagementWireless Settings for client PCs Client PC ConfigurationAd-hoc Mode Infrastructure Mode WEP SettingsWhich printing method should I use? Printing MethodsChecking your Network Protocols Windows Network Configuration Windows Peer-to-peer Print Driver SetupIf your LevelOne Printer Server is not listed Configure Printer PortPort Options ManagementBanner PortRetry Interval Network Neighborhood Windows SMB PrintingPrinting from MS-DOS Programs Windows with Server-based Print QueuesNdps Manager Client Windows using NdpsAdvanced Setup and Management AppleTalk SetupMacintosh AppleTalk Software RequirementsCommunication Protocol. Enter no for Ascii or YES for Binary AppleTalk SettingsPage Installation BiAdmin Management UtilityRequirements Additional RecommendationsMain Screen OperationGroups Status Icons Device ListTCP/IP Configuration Configuration IconsAppleTalk Configuration Device InformationMenu Options InitDevice Menu Diagnostics menu Configuration MenuControl Menu Print TestPreparation Web Interface SetupConfiguration Screens Connecting to the LevelOne Printer ServerAppleTalk NetBEUI If ErrorDomain Name Response TimeNetWare LevelOne Printer Server ModeGeneral Management Stations Snmp Simple Network Management ProtocolConnection Trap ReceiversPassword Configure ServerEnable Protocols Server NameWireless Screen WEP Data Privacy Configuration128 Bit AuthenticationKey Other Screens Serial Port ConfigurationServer Status Printer PortsIPP Server Configuration Special FeaturesInternet Printing Protocol IPP Installing from the CD-ROM IPP Client Setup Windows 95/98/ME/NTInstalling using IPPCLIENT.EXE IPP Client Configuration Windows 95/98/ME/NTOpen the Printers folder Start Settings Printers Changing the IPP Port SettingsParallel Port 3 if exists IPP Client Setup WindowsWindows 2000 No printer driver Using IPP PrintersSystem Requirements Internet Mail PrintingMail Server Internet LevelOne Printer ServerInternet Mail Printing Configuration User Software Installation User SoftwarePort Name Using the new Port Printing through the Internet Canceling a Print JobChecking the Printer Driver Snmp Settings Configuring the LevelOne Printer Server for SnmpManagement Station Settings Trap Receiving Station SettingsRequired configuration Wireless ConfigurationModels WPS-0100 & WPS-0100USB WEP Settings BiAdmin Wireless Screen Enabled WEP DisabledEncryption Link Info Screen Wireless Link Info ScreenHardware & LAN Problems TroubleshootingProblem No All the LevelOne Printer Servers LEDs are off If using TCP/IPAppleTalk Macintosh Page Novell NetWare To remove an existing printer port installation Windows Printing ProblemsPage ∙ Then select File Properties Details Problem No General Specifications SpecificationsEnvironmental Specifications all Models WPS-0100Other Models Parallel Port Pin AssignmentsProtocol Support Feature SupportRegulatory Approvals Network Server ConfigurationWindows NT Server Preparing for TCP/IP PrintingWindows Adding a TCP/IP Remote PrinterSetup Wizard Configuration Methods Bindery or NDSWindows 2000 Server BiAdmin Configuration DataNovell Remote Printer Mode Other MethodsNovell LevelOne Printer Server Mode Setup for Ndps NetWareOverview Creating an Ndps Manager ObjectAt the Identification page, click the Printer Agent List Creating an Ndps Printer AgentSelect Novell Printer Gateway in the Gateway Type. see above ∙ LPD ∙ FTP Unix Systems