LevelOne WPS-100USB, WPS 0100 manual Installation User Software, Port Name

Page 54

User Software

The software provided for remote users (InterNet Printing Port) should be installed by everyone intending to use Internet printing. Otherwise, remote users can print correctly only if:

∙They send an E-Mail directly to the LevelOne Printer Server Mail Account, using their normal E-Mail application.

∙The E-Mail contains plain text only.

∙The Internet LevelOne Printer Server is configured with Print every E-MailON.

Installation of the InterNet Printing Port software will create a new printer port. After attaching the correct printer to this port, users can print to the Internet Printer using any Windows application.

Installation - User Software

1.Run the InterNet Printing Port installation program SETUP.EXE

2.Default values for the installation are:

∙Directory - C:\Program Files\Internet_Printer

∙Start Menu folder - InterNet Printing Port Driver

3.You will then see the Configure Port screen, as shown in the following screenshot.

Figure 22 InterNet Printer Port

4.The following data must be provided.

Port Name

Enter a descriptive name (e.g. "WAN") for the new printer port.

Page 51

Image 54

Contents User Guide Table of Contents Troubleshooting Appendix a SpecificationsAppendix B Network Server Configuration Features IntroductionSafety Instructions Package Contents ModelsWPS-0100 LAN LED To restore the factory default settings LED IndicatorsDiagnostic Push Button To generate a Diagnostic print outPage LAN Installation ProcedureCheck the LEDs Procedure ConfigurationUsing the Windows Wizard LevelOne Printer ServerWireless Configuration Alternatives to the Windows WizardIf the desired LevelOne Printer Server is not listed Advanced Configuration and Management QuicksetAd-hoc Mode Infrastructure Mode Client PC ConfigurationWireless Settings for client PCs WEP SettingsPrinting Methods Which printing method should I use?Checking your Network Protocols Windows Network Configuration Setup Windows Peer-to-peer Print DriverConfigure Printer Port If your LevelOne Printer Server is not listedManagement Port OptionsPort BannerRetry Interval Windows SMB Printing Network NeighborhoodWindows with Server-based Print Queues Printing from MS-DOS ProgramsWindows using Ndps Ndps Manager ClientMacintosh AppleTalk AppleTalk SetupAdvanced Setup and Management Software RequirementsAppleTalk Settings Communication Protocol. Enter no for Ascii or YES for BinaryPage Requirements BiAdmin Management UtilityInstallation Additional RecommendationsOperation Main ScreenGroups Device List Status IconsAppleTalk Configuration Configuration IconsTCP/IP Configuration Device InformationMenu Options InitDevice Menu Control Menu Configuration MenuDiagnostics menu Print TestWeb Interface Setup PreparationConnecting to the LevelOne Printer Server Configuration ScreensAppleTalk Domain Name If ErrorNetBEUI Response TimeLevelOne Printer Server Mode NetWareGeneral Snmp Simple Network Management Protocol Management StationsTrap Receivers ConnectionEnable Protocols Configure ServerPassword Server NameWireless Screen Configuration WEP Data PrivacyAuthentication 128 BitKey Server Status Serial Port ConfigurationOther Screens Printer PortsSpecial Features IPP Server ConfigurationInternet Printing Protocol IPP Installing using IPPCLIENT.EXE IPP Client Setup Windows 95/98/ME/NTInstalling from the CD-ROM IPP Client Configuration Windows 95/98/ME/NTChanging the IPP Port Settings Open the Printers folder Start Settings PrintersIPP Client Setup Windows Parallel Port 3 if exists Using IPP Printers Windows 2000 No printer driverMail Server Internet Mail PrintingSystem Requirements Internet LevelOne Printer ServerInternet Mail Printing Configuration Installation User Software User SoftwarePort Name Using the new Port Canceling a Print Job Printing through the InternetChecking the Printer Driver Management Station Settings Configuring the LevelOne Printer Server for SnmpSnmp Settings Trap Receiving Station SettingsWireless Configuration Required configurationModels WPS-0100 & WPS-0100USB WEP Settings BiAdmin Wireless Screen WEP Disabled EnabledEncryption Wireless Link Info Screen Link Info ScreenProblem No All the LevelOne Printer Servers LEDs are off TroubleshootingHardware & LAN Problems If using TCP/IPAppleTalk Macintosh Page Novell NetWare Windows Printing Problems To remove an existing printer port installationPage ∙ Then select File Properties Details Problem No Environmental Specifications all Models SpecificationsGeneral Specifications WPS-0100Parallel Port Pin Assignments Other ModelsFeature Support Protocol SupportWindows NT Server Network Server ConfigurationRegulatory Approvals Preparing for TCP/IP PrintingAdding a TCP/IP Remote Printer WindowsConfiguration Methods Bindery or NDS Setup WizardWindows 2000 Server Novell Remote Printer Mode Configuration DataBiAdmin Other MethodsOverview Setup for Ndps NetWareNovell LevelOne Printer Server Mode Creating an Ndps Manager ObjectCreating an Ndps Printer Agent At the Identification page, click the Printer Agent ListSelect Novell Printer Gateway in the Gateway Type. see above Unix Systems ∙ LPD ∙ FTP