LevelOne WPS 0100, WPS-100USB manual Using the new Port

Remote Printer	The E-Mail address for the Internet printer. Your print
E-mail Address	jobs will be sent to this E-Mail address.
Mail Server Name	This is the name or IP Address of your Mail Server. If
or IP Address	you are on a LAN, ask the LAN Administrator. If using
	a dial-up connection, use the data provided by your ISP.
Your Internet	The normal address that people use to send you E-mail.
E-mail Address
Retry Interval	If unable to connect to the E-Mail server, retry after this
(Seconds)	time period (1 to 255 seconds, 30 is usually OK).
Reply Notification	Check to receive an E-Mail when your print job has
Mail	been processed.

5.On completion, a new printer port will have been created.

Using the new Port

The Windows Control Panel is used to connect the correct printer to the InterNet Printing Port. In Windows 95/NT, the procedure is:

1.Select the Printer which matches the remote printer, then choose Properties, as shown in the example below.

Figure 23 InterNet Printer Properties

2.Select the new port - WAN (InterNet Printer) in the example - as the port for this printer.

∙If you do not have the correct printer driver, or you wish to create another printer using an existing driver, use the Windows Add Printer facility.

∙Using the Windows Port Settings or Configure Port facility will reveal the same Configure Port screen shown in Figure 22 InterNet Printer Port on page 51.

∙If you wish to print to multiple Internet Printers, use the Windows Add Port facility to add a new InterNet Printer port. Ensure that the correct data is entered in each port, and that each port has a unique name.

Page 52