LevelOne WPS 0100, WPS-100USB manual ∙ Then select File Properties Details

Page 69

9.Click the Browse Device button, select the desired LevelOne Printer Server, and click OK.

10.Click OK to return to the Printers folders, and right-click on the Printer. Ensure that the Work off-lineoption is NOT checked.

The Printer should no longer be grayed out, and is ready for use.

Problem No. 3 I connected and configured a WPS (Windows Printing System) printer as described, but I can't get the print job to print.

Solution No. 3 Printer drivers for WPS printers poll the printer before sending print data. Since the printer is networked, the printer is not found and no data is sent. The solution is to add your printer as a network printer as described in Solution 1 above.

Note: The screens shown in Solution 1 are from Windows 95. Other versions of Windows may look slightly different, but the process is identical. If using Window NT or 2000, do NOT enable Sharing for the printer.

Problem No. 4 When printing from some software applications such as Power Point, it takes a long time and the print out is incorrect.

Solution No. 4 The problem is due to the printer, which is being configured to Start printing after the first page is spooled. To change this setting:

∙Go to Control Panel - Printers and click on your printer.

∙Then select File - Properties - Details.

∙When the Details screen appears, click the Spool Settings button.

∙When the Spool Settings dialogue box appears, choose Start

Page 66

Image 69

Contents User Guide Table of Contents Troubleshooting Appendix a SpecificationsAppendix B Network Server Configuration Introduction FeaturesSafety Instructions Models Package ContentsWPS-0100 LAN LED Diagnostic Push Button LED IndicatorsTo restore the factory default settings To generate a Diagnostic print outPage Procedure LAN InstallationCheck the LEDs Using the Windows Wizard ConfigurationProcedure LevelOne Printer ServerWireless Configuration Alternatives to the Windows WizardIf the desired LevelOne Printer Server is not listed Quickset Advanced Configuration and ManagementWireless Settings for client PCs Client PC ConfigurationAd-hoc Mode Infrastructure Mode WEP SettingsPrinting Methods Which printing method should I use?Checking your Network Protocols Windows Network Configuration Windows Peer-to-peer Print Driver SetupIf your LevelOne Printer Server is not listed Configure Printer PortPort Options ManagementPort BannerRetry Interval Network Neighborhood Windows SMB PrintingPrinting from MS-DOS Programs Windows with Server-based Print QueuesNdps Manager Client Windows using NdpsAdvanced Setup and Management AppleTalk SetupMacintosh AppleTalk Software RequirementsCommunication Protocol. Enter no for Ascii or YES for Binary AppleTalk SettingsPage Installation BiAdmin Management UtilityRequirements Additional RecommendationsOperation Main ScreenGroups Status Icons Device ListTCP/IP Configuration Configuration IconsAppleTalk Configuration Device InformationMenu Options InitDevice Menu Diagnostics menu Configuration MenuControl Menu Print TestPreparation Web Interface SetupConnecting to the LevelOne Printer Server Configuration ScreensAppleTalk NetBEUI If ErrorDomain Name Response TimeLevelOne Printer Server Mode NetWareGeneral Management Stations Snmp Simple Network Management ProtocolConnection Trap ReceiversPassword Configure ServerEnable Protocols Server NameWireless Screen WEP Data Privacy ConfigurationAuthentication 128 BitKey Other Screens Serial Port ConfigurationServer Status Printer PortsSpecial Features IPP Server ConfigurationInternet Printing Protocol IPP Installing from the CD-ROM IPP Client Setup Windows 95/98/ME/NTInstalling using IPPCLIENT.EXE IPP Client Configuration Windows 95/98/ME/NTOpen the Printers folder Start Settings Printers Changing the IPP Port SettingsParallel Port 3 if exists IPP Client Setup WindowsWindows 2000 No printer driver Using IPP PrintersSystem Requirements Internet Mail PrintingMail Server Internet LevelOne Printer ServerInternet Mail Printing Configuration Installation User Software User SoftwarePort Name Using the new Port Canceling a Print Job Printing through the InternetChecking the Printer Driver Snmp Settings Configuring the LevelOne Printer Server for SnmpManagement Station Settings Trap Receiving Station SettingsWireless Configuration Required configurationModels WPS-0100 & WPS-0100USB WEP Settings BiAdmin Wireless Screen WEP Disabled EnabledEncryption Link Info Screen Wireless Link Info ScreenHardware & LAN Problems TroubleshootingProblem No All the LevelOne Printer Servers LEDs are off If using TCP/IPAppleTalk Macintosh Page Novell NetWare To remove an existing printer port installation Windows Printing ProblemsPage ∙ Then select File Properties Details Problem No General Specifications SpecificationsEnvironmental Specifications all Models WPS-0100Other Models Parallel Port Pin AssignmentsProtocol Support Feature SupportRegulatory Approvals Network Server ConfigurationWindows NT Server Preparing for TCP/IP PrintingWindows Adding a TCP/IP Remote PrinterConfiguration Methods Bindery or NDS Setup WizardWindows 2000 Server BiAdmin Configuration DataNovell Remote Printer Mode Other MethodsNovell LevelOne Printer Server Mode Setup for Ndps NetWareOverview Creating an Ndps Manager ObjectAt the Identification page, click the Printer Agent List Creating an Ndps Printer AgentSelect Novell Printer Gateway in the Gateway Type. see above ∙ LPD ∙ FTP Unix Systems