LevelOne WPS 0100, WPS-100USB manual Using IPP Printers, Windows 2000 No printer driver

Page 51

Figure 21: Windows 2000: No printer driver

5.Click "OK", and then select the printer manufacturer and model to match the printer connected to the port on the IPP Server.

6.Click "Next", and complete the Wizard. The IPP printer is now ready for use.

Using IPP Printers

The IPP Printer can be selected and used like any other Windows printer. If the IPP Server is not on your network, your Internet connection needs to be active.

If you wish to check the availability of the remote IPP Server, you can use the Query IPP Printer program installed with Add IPP Port.

An IPP Server may be unavailable for any of the following reasons:

∙It is powered off.

∙A printer problem has caused the IPP Server to cease responding, and a restart (reboot) is required.

∙The Server's IP Address has changed.

∙The Internet connection for the IPP Server is down.

∙Network congestion causes the connection attempt to time out.

If using the supplied IPP Client software, there are 2 settings - Retry Interval and Retry Count - which can be adjusted if you have problems connecting to the IPP Server.

See the previous section Changing the IPP Port Settings for details.

Page 48

Image 51

Contents User Guide Table of Contents Troubleshooting Appendix a SpecificationsAppendix B Network Server Configuration Introduction FeaturesSafety Instructions Models Package ContentsWPS-0100 LAN LED To generate a Diagnostic print out LED IndicatorsDiagnostic Push Button To restore the factory default settingsPage Procedure LAN InstallationCheck the LEDs LevelOne Printer Server ConfigurationUsing the Windows Wizard ProcedureWireless Configuration Alternatives to the Windows WizardIf the desired LevelOne Printer Server is not listed Quickset Advanced Configuration and ManagementWEP Settings Client PC ConfigurationWireless Settings for client PCs Ad-hoc Mode Infrastructure ModePrinting Methods Which printing method should I use?Checking your Network Protocols Windows Network Configuration Windows Peer-to-peer Print Driver SetupIf your LevelOne Printer Server is not listed Configure Printer PortPort Options ManagementPort BannerRetry Interval Network Neighborhood Windows SMB PrintingPrinting from MS-DOS Programs Windows with Server-based Print QueuesNdps Manager Client Windows using NdpsSoftware Requirements AppleTalk SetupAdvanced Setup and Management Macintosh AppleTalkCommunication Protocol. Enter no for Ascii or YES for Binary AppleTalk SettingsPage Additional Recommendations BiAdmin Management UtilityInstallation RequirementsOperation Main ScreenGroups Status Icons Device ListDevice Information Configuration IconsTCP/IP Configuration AppleTalk ConfigurationMenu Options InitDevice Menu Print Test Configuration MenuDiagnostics menu Control MenuPreparation Web Interface SetupConnecting to the LevelOne Printer Server Configuration ScreensAppleTalk Response Time If ErrorNetBEUI Domain NameLevelOne Printer Server Mode NetWareGeneral Management Stations Snmp Simple Network Management ProtocolConnection Trap ReceiversServer Name Configure ServerPassword Enable ProtocolsWireless Screen WEP Data Privacy ConfigurationAuthentication 128 BitKey Printer Ports Serial Port ConfigurationOther Screens Server StatusSpecial Features IPP Server ConfigurationInternet Printing Protocol IPP IPP Client Configuration Windows 95/98/ME/NT IPP Client Setup Windows 95/98/ME/NT Installing from the CD-ROM Installing using IPPCLIENT.EXEOpen the Printers folder Start Settings Printers Changing the IPP Port SettingsParallel Port 3 if exists IPP Client Setup WindowsWindows 2000 No printer driver Using IPP PrintersInternet LevelOne Printer Server Internet Mail PrintingSystem Requirements Mail ServerInternet Mail Printing Configuration Installation User Software User SoftwarePort Name Using the new Port Canceling a Print Job Printing through the InternetChecking the Printer Driver Trap Receiving Station Settings Configuring the LevelOne Printer Server for SnmpSnmp Settings Management Station SettingsWireless Configuration Required configurationModels WPS-0100 & WPS-0100USB WEP Settings BiAdmin Wireless Screen WEP Disabled EnabledEncryption Link Info Screen Wireless Link Info ScreenIf using TCP/IP TroubleshootingHardware & LAN Problems Problem No All the LevelOne Printer Servers LEDs are offAppleTalk Macintosh Page Novell NetWare To remove an existing printer port installation Windows Printing ProblemsPage ∙ Then select File Properties Details Problem No WPS-0100 SpecificationsGeneral Specifications Environmental Specifications all ModelsOther Models Parallel Port Pin AssignmentsProtocol Support Feature SupportPreparing for TCP/IP Printing Network Server ConfigurationRegulatory Approvals Windows NT ServerWindows Adding a TCP/IP Remote PrinterConfiguration Methods Bindery or NDS Setup WizardWindows 2000 Server Other Methods Configuration DataBiAdmin Novell Remote Printer ModeCreating an Ndps Manager Object Setup for Ndps NetWareNovell LevelOne Printer Server Mode OverviewAt the Identification page, click the Printer Agent List Creating an Ndps Printer AgentSelect Novell Printer Gateway in the Gateway Type. see above ∙ LPD ∙ FTP Unix Systems