LevelOne WPS-100USB manual Other Screens, Server Status, Printer Ports, Serial Port Configuration

Page 46

Other Screens

Server Status

This screen shows server system data and the current settings for all of the other screens. It is read-only; no data can be input on this screen.

Printer Ports

This screen displays the current status of each port. For each port, the following data is listed:

Connected Printer- the model name of the printer connected to the port, if the printer name is known. (If the printer is not bi-directional, this information is unavailable.)

Status - the current status of the printer (On -line, Off-line, Out of paper)

Printing Information - this will show either Idle or Printing.

Serial Port Configuration

If fitted, the Serial Port Screen can be accessed by clicking the Configuration button on the Printer Ports Screen.

If the default values do not work, check your serial printer to determine what settings should be used.

Logical Printers

Logical Printers (ports) can be used under Unix or NetWare. For each Logical Printer, the following fields are available:

Logical Printer

Select the Logical Printer Port you wish to configure. (L1 to L3 or

(Port)

L1 to L8, depending on your model)

 

Click the Get Data button to update the display with the current data

 

for the selected logical printer.

 

 

Port

Select the Printer Port which the Logical printer will use.

 

 

Pre-string

The printer control string (in hex) to be sent to the printer before

 

each print job. This string cannot exceed 15 characters.

 

 

Post String

The printer control string (in hex) to be sent to the printer after each

 

print job. This string cannot exceed 15 characters.

 

 

Convert LF to

If checked, LF (line feed) characters are changed to CR+LF (carriage

CR+LF

return + line feed).

 

 

Page 43

Image 46
Contents User Guide Table of Contents Appendix a Specifications TroubleshootingAppendix B Network Server Configuration Features IntroductionSafety Instructions Package Contents ModelsWPS-0100 LAN LED To restore the factory default settings LED IndicatorsDiagnostic Push Button To generate a Diagnostic print outPage LAN Installation ProcedureCheck the LEDs Procedure ConfigurationUsing the Windows Wizard LevelOne Printer ServerAlternatives to the Windows Wizard Wireless ConfigurationIf the desired LevelOne Printer Server is not listed Advanced Configuration and Management QuicksetAd-hoc Mode Infrastructure Mode Client PC ConfigurationWireless Settings for client PCs WEP SettingsWhich printing method should I use? Printing MethodsChecking your Network Protocols Windows Network Configuration Setup Windows Peer-to-peer Print DriverConfigure Printer Port If your LevelOne Printer Server is not listedManagement Port OptionsBanner PortRetry Interval Windows SMB Printing Network NeighborhoodWindows with Server-based Print Queues Printing from MS-DOS ProgramsWindows using Ndps Ndps Manager ClientMacintosh AppleTalk AppleTalk SetupAdvanced Setup and Management Software RequirementsAppleTalk Settings Communication Protocol. Enter no for Ascii or YES for BinaryPage Requirements BiAdmin Management UtilityInstallation Additional RecommendationsMain Screen OperationGroups Device List Status IconsAppleTalk Configuration Configuration IconsTCP/IP Configuration Device InformationMenu Options InitDevice Menu Control Menu Configuration MenuDiagnostics menu Print TestWeb Interface Setup PreparationConfiguration Screens Connecting to the LevelOne Printer ServerAppleTalk Domain Name If ErrorNetBEUI Response TimeNetWare LevelOne Printer Server ModeGeneral Snmp Simple Network Management Protocol Management StationsTrap Receivers ConnectionEnable Protocols Configure ServerPassword Server NameWireless Screen Configuration WEP Data Privacy128 Bit AuthenticationKey Server Status Serial Port ConfigurationOther Screens Printer PortsIPP Server Configuration Special FeaturesInternet Printing Protocol IPP Installing using IPPCLIENT.EXE IPP Client Setup Windows 95/98/ME/NTInstalling from the CD-ROM IPP Client Configuration Windows 95/98/ME/NTChanging the IPP Port Settings Open the Printers folder Start Settings PrintersIPP Client Setup Windows Parallel Port 3 if existsUsing IPP Printers Windows 2000 No printer driverMail Server Internet Mail PrintingSystem Requirements Internet LevelOne Printer ServerInternet Mail Printing Configuration User Software Installation User SoftwarePort Name Using the new Port Printing through the Internet Canceling a Print JobChecking the Printer Driver Management Station Settings Configuring the LevelOne Printer Server for SnmpSnmp Settings Trap Receiving Station SettingsRequired configuration Wireless ConfigurationModels WPS-0100 & WPS-0100USB WEP Settings BiAdmin Wireless Screen Enabled WEP DisabledEncryption Wireless Link Info Screen Link Info ScreenProblem No All the LevelOne Printer Servers LEDs are off TroubleshootingHardware & LAN Problems If using TCP/IPAppleTalk Macintosh Page Novell NetWare Windows Printing Problems To remove an existing printer port installationPage ∙ Then select File Properties Details Problem No Environmental Specifications all Models SpecificationsGeneral Specifications WPS-0100Parallel Port Pin Assignments Other ModelsFeature Support Protocol SupportWindows NT Server Network Server ConfigurationRegulatory Approvals Preparing for TCP/IP PrintingAdding a TCP/IP Remote Printer WindowsSetup Wizard Configuration Methods Bindery or NDSWindows 2000 Server Novell Remote Printer Mode Configuration DataBiAdmin Other MethodsOverview Setup for Ndps NetWareNovell LevelOne Printer Server Mode Creating an Ndps Manager ObjectCreating an Ndps Printer Agent At the Identification page, click the Printer Agent ListSelect Novell Printer Gateway in the Gateway Type. see above Unix Systems ∙ LPD ∙ FTP