LevelOne WPS 0100 manual Configuration Data, BiAdmin, Other Methods, Novell Remote Printer Mode

Page 77

BiAdmin

For more control and flexibility, or to use NetWare Remote Printer Mode, you can use the supplied BiAdmin management utility. Provided you have Novell's Client 32 installed, BiAdmin will allow you to configure the NetWare Server as well as the LevelOne Printer Server.

∙BiAdmin is installed by the Administrator menu option on the CD-ROM.

∙See Chapter 5 for general information on using BiAdmin.

∙The NetWare Manual (in the Manual\NetWare folder on the CD-ROM) contains detailed information on using BiAdmin with NetWare Servers.

Other Methods

If you are unable to use Windows -based programs for configuration, the following methods are available to configure the LevelOne Printer Server:

WPConfig

This program requires Windows 3.1, and the IPX/SPX protocol.

PSConfig

Menu-based DOS program, intended only to configure the LevelOne

 

Printer Server for use with NetWare V2, 3 and 4.

Quickset

Command-line DOC program, intended only to configure the LevelOne

 

Printer Server for use with NetWare V2, 3 and 4. This program also has

 

a limited ability to configure the NetWare Server itself.

∙These programs are provided on the CD-ROM, in the Utility folder.

∙WPConfig has a SETUP program; the other programs need only to be copied to the desired folder on your PC.

∙The documentation for these programs is provided in sub−folders of the Manual folder on the CD-ROM.

∙PSConfig and WPConfig do NOT configure your NetWare Server. It is necessary to use PCONSOLE to create the necessary print object and queues, and ensure the appropriate users have access rights to the print queues.

Configuration Data

The LevelOne Printer Server requires the following "General" data, and the data for the mode (LevelOne Printer Server or Remote Printer) you are using.

General

 

 

 

Device Name

The device name (Default Server Name) is shown on a sticker on

 

the base of the device. Change this if you wish. The new name

 

MUST NOT exceed 19 characters, nor contain any spaces.

 

 

Device Password

Default is NULL (no password).

 

 

NetWare Mode

LevelOne Printer Server or Remote Printer.

 

 

Frame Type

Select the frame types used by your network. (Ethernet 802.2,

 

Ethernet 802.3, Ethernet SNAP, and Ethernet II) By default, all

 

frame types are enabled.

 

 

Novell Remote Printer Mode

 

 

Novell LevelOne

NetWare LevelOne Printer Server to service the LevelOne Printer

Printer Server for P1

Server's parallel port 1.

 

 

Novell LevelOne

NetWare LevelOne Printer Server to service the LevelOne Printer

Page 74

Page 76 Page 78
Image 77
Page 76 Page 78
Contents User Guide Table of Contents Appendix B Network Server Configuration TroubleshootingAppendix a Specifications Introduction FeaturesSafety Instructions Models Package ContentsWPS-0100 LAN LED Diagnostic Push Button LED IndicatorsTo restore the factory default settings To generate a Diagnostic print outPage Procedure LAN InstallationCheck the LEDs Using the Windows Wizard ConfigurationProcedure LevelOne Printer ServerIf the desired LevelOne Printer Server is not listed Wireless ConfigurationAlternatives to the Windows Wizard Quickset Advanced Configuration and ManagementWireless Settings for client PCs Client PC ConfigurationAd-hoc Mode Infrastructure Mode WEP SettingsChecking your Network Protocols Windows Printing MethodsWhich printing method should I use? Network Configuration Windows Peer-to-peer Print Driver SetupIf your LevelOne Printer Server is not listed Configure Printer PortPort Options ManagementRetry Interval PortBanner Network Neighborhood Windows SMB PrintingPrinting from MS-DOS Programs Windows with Server-based Print QueuesNdps Manager Client Windows using NdpsAdvanced Setup and Management AppleTalk SetupMacintosh AppleTalk Software RequirementsCommunication Protocol. Enter no for Ascii or YES for Binary AppleTalk SettingsPage Installation BiAdmin Management UtilityRequirements Additional RecommendationsGroups OperationMain Screen Status Icons Device ListTCP/IP Configuration Configuration IconsAppleTalk Configuration Device InformationMenu Options InitDevice Menu Diagnostics menu Configuration MenuControl Menu Print TestPreparation Web Interface SetupAppleTalk Connecting to the LevelOne Printer ServerConfiguration Screens NetBEUI If ErrorDomain Name Response TimeGeneral LevelOne Printer Server ModeNetWare Management Stations Snmp Simple Network Management ProtocolConnection Trap ReceiversPassword Configure ServerEnable Protocols Server NameWireless Screen WEP Data Privacy ConfigurationKey Authentication128 Bit Other Screens Serial Port ConfigurationServer Status Printer PortsInternet Printing Protocol IPP Special FeaturesIPP Server Configuration Installing from the CD-ROM IPP Client Setup Windows 95/98/ME/NTInstalling using IPPCLIENT.EXE IPP Client Configuration Windows 95/98/ME/NTOpen the Printers folder Start Settings Printers Changing the IPP Port SettingsParallel Port 3 if exists IPP Client Setup WindowsWindows 2000 No printer driver Using IPP PrintersSystem Requirements Internet Mail PrintingMail Server Internet LevelOne Printer ServerInternet Mail Printing Configuration Port Name Installation User SoftwareUser Software Using the new Port Checking the Printer Driver Canceling a Print JobPrinting through the Internet Snmp Settings Configuring the LevelOne Printer Server for SnmpManagement Station Settings Trap Receiving Station SettingsModels WPS-0100 & WPS-0100USB Wireless ConfigurationRequired configuration WEP Settings BiAdmin Wireless Screen Encryption WEP DisabledEnabled Link Info Screen Wireless Link Info ScreenHardware & LAN Problems TroubleshootingProblem No All the LevelOne Printer Servers LEDs are off If using TCP/IPAppleTalk Macintosh Page Novell NetWare To remove an existing printer port installation Windows Printing ProblemsPage ∙ Then select File Properties Details Problem No General Specifications SpecificationsEnvironmental Specifications all Models WPS-0100Other Models Parallel Port Pin AssignmentsProtocol Support Feature Support Regulatory Approvals Network Server Configuration Windows NT Server Preparing for TCP/IP PrintingWindows Adding a TCP/IP Remote PrinterWindows 2000 Server Configuration Methods Bindery or NDSSetup Wizard BiAdmin Configuration DataNovell Remote Printer Mode Other MethodsNovell LevelOne Printer Server Mode Setup for Ndps NetWareOverview Creating an Ndps Manager ObjectAt the Identification page, click the Printer Agent List Creating an Ndps Printer AgentSelect Novell Printer Gateway in the Gateway Type. see above ∙ LPD ∙ FTP Unix Systems
Top Page Image Contents