LevelOne WPS 0100 Special Features, Internet Printing Protocol IPP, IPP Server Configuration

Page 47

Chapter 7

7

Special Features

This chapter covers the special features of the LevelOne Printer Server.

Overview

The LevelOne Printer Server has four (4) special features:

Some LevelOne Printer Servers support IPP (Internet Printing Protocol).

All model support the proprietary Internet Mail Printing system.

SNMP (Simple Network Management Protocol) is supported by all models.

Wireless Station - supported by WPS-0100 and WPS-0100USB only.

Internet Printing Protocol (IPP)

IPP (Internet Printing Protocol) is a new standards-based system to allow remote printing from a PC to any accessible printer. Normally, the printer will be attached to a computer or other device which functions as an IPP Server.

For client PCs, it is necessary to install a compatible IPP Client program. The Client must also know the IP Address or URL or the IPP Server.

IPP Server Configuration

The LevelOne Printer Server contains the necessary firmware to act as an IPP Server. No additional configuration is necessary. However, the following requirements must be met.

The LevelOne Printer Server must have a valid IP Address. For printing via the Internet, the LevelOne Printer Server's IP Address must be external (allocated by your ISP), rather than an IP Address on your local LAN.

Any Router, Gateway or Firewall linking your LAN to the Internet must NOT block the IPP protocol.

You must advise clients of the correct URL or IP Address of the IPP Server. To use a URL rather than an IP Address, you need to register the domain name for the URL.

Unless clients are using Windows 2000, you must provide your clients with the supplied IPP Client software. If it is not convenient to provide the CD-ROM, supply the IPP_CLIENT.EXE file, located in the IPP folder.

Page 44

Image 47
Contents User Guide Table of Contents Appendix B Network Server Configuration TroubleshootingAppendix a Specifications Introduction FeaturesSafety Instructions Models Package ContentsWPS-0100 LAN LED To generate a Diagnostic print out LED IndicatorsDiagnostic Push Button To restore the factory default settingsPage Procedure LAN InstallationCheck the LEDs LevelOne Printer Server ConfigurationUsing the Windows Wizard ProcedureIf the desired LevelOne Printer Server is not listed Wireless ConfigurationAlternatives to the Windows Wizard Quickset Advanced Configuration and ManagementWEP Settings Client PC ConfigurationWireless Settings for client PCs Ad-hoc Mode Infrastructure ModeChecking your Network Protocols Windows Printing MethodsWhich printing method should I use? Network Configuration Windows Peer-to-peer Print Driver SetupIf your LevelOne Printer Server is not listed Configure Printer PortPort Options ManagementRetry Interval PortBanner Network Neighborhood Windows SMB PrintingPrinting from MS-DOS Programs Windows with Server-based Print QueuesNdps Manager Client Windows using NdpsSoftware Requirements AppleTalk SetupAdvanced Setup and Management Macintosh AppleTalkCommunication Protocol. Enter no for Ascii or YES for Binary AppleTalk SettingsPage Additional Recommendations BiAdmin Management UtilityInstallation RequirementsGroups OperationMain Screen Status Icons Device ListDevice Information Configuration IconsTCP/IP Configuration AppleTalk ConfigurationMenu Options InitDevice Menu Print Test Configuration MenuDiagnostics menu Control MenuPreparation Web Interface SetupAppleTalk Connecting to the LevelOne Printer ServerConfiguration Screens Response Time If ErrorNetBEUI Domain NameGeneral LevelOne Printer Server ModeNetWare Management Stations Snmp Simple Network Management ProtocolConnection Trap ReceiversServer Name Configure ServerPassword Enable ProtocolsWireless Screen WEP Data Privacy ConfigurationKey Authentication128 Bit Printer Ports Serial Port ConfigurationOther Screens Server StatusInternet Printing Protocol IPP Special FeaturesIPP Server Configuration IPP Client Configuration Windows 95/98/ME/NT IPP Client Setup Windows 95/98/ME/NTInstalling from the CD-ROM Installing using IPPCLIENT.EXEOpen the Printers folder Start Settings Printers Changing the IPP Port SettingsParallel Port 3 if exists IPP Client Setup WindowsWindows 2000 No printer driver Using IPP PrintersInternet LevelOne Printer Server Internet Mail PrintingSystem Requirements Mail ServerInternet Mail Printing Configuration Port Name Installation User SoftwareUser Software Using the new Port Checking the Printer Driver Canceling a Print JobPrinting through the Internet Trap Receiving Station Settings Configuring the LevelOne Printer Server for SnmpSnmp Settings Management Station SettingsModels WPS-0100 & WPS-0100USB Wireless ConfigurationRequired configuration WEP Settings BiAdmin Wireless Screen Encryption WEP DisabledEnabled Link Info Screen Wireless Link Info ScreenIf using TCP/IP TroubleshootingHardware & LAN Problems Problem No All the LevelOne Printer Servers LEDs are offAppleTalk Macintosh Page Novell NetWare To remove an existing printer port installation Windows Printing ProblemsPage ∙ Then select File Properties Details Problem No WPS-0100 SpecificationsGeneral Specifications Environmental Specifications all ModelsOther Models Parallel Port Pin AssignmentsProtocol Support Feature SupportPreparing for TCP/IP Printing Network Server ConfigurationRegulatory Approvals Windows NT ServerWindows Adding a TCP/IP Remote PrinterWindows 2000 Server Configuration Methods Bindery or NDSSetup Wizard Other Methods Configuration DataBiAdmin Novell Remote Printer ModeCreating an Ndps Manager Object Setup for Ndps NetWareNovell LevelOne Printer Server Mode OverviewAt the Identification page, click the Printer Agent List Creating an Ndps Printer AgentSelect Novell Printer Gateway in the Gateway Type. see above ∙ LPD ∙ FTP Unix Systems