LevelOne WPS-100USB, WPS 0100 IPP Client Setup Windows 95/98/ME/NT, Installing from the CD-ROM

Page 48

IPP Client Setup - Windows 95/98/ME/NT 4.0

The IPP Client Software can be installed on any of the following systems:

∙Window 95/98/ME

∙Windows NT 4.0

Installing from the CD-ROM

1.Insert the CD-ROM in your drive. If the program does not start automatically, run the SETUP program in the top-level folder.

2.Follow the prompts until you reach the Select Installation screen, and select IPP Client.

3.At the next screen, select the Install IPP Client option.

4.Click Next, and step though the remaining screens to complete the installation.

Installing using IPP_CLIENT.EXE

1.Run this program to unzip the included files.

2.The IPP Setup program will then run.

3.Follow the prompts to complete the installation.

IPP Client Configuration (Windows 95/98/ME/NT 4.0)

1.Run the "Add IPP Port" program entry created by the installation. A screen like the following will be displayed.

Figure 18: IPP Port

2.If Internet access from your location is via a Proxy Server, check Access IPP Server via Proxy Server, and enter details of your Proxy Server. (This will be the same as your Browser configuration.)

3.Enter the IP Address or URL of the IPP Server.

4.Click Select Device Port to view the available ports on the IPP Server, and select the appropriate port. A connection to the IPP Server will be established at this time.

Page 45

Image 48

Contents User Guide Table of Contents Troubleshooting Appendix a SpecificationsAppendix B Network Server Configuration Features IntroductionSafety Instructions Package Contents ModelsWPS-0100 LAN LED LED Indicators Diagnostic Push ButtonTo restore the factory default settings To generate a Diagnostic print outPage LAN Installation ProcedureCheck the LEDs Configuration Using the Windows WizardProcedure LevelOne Printer ServerWireless Configuration Alternatives to the Windows WizardIf the desired LevelOne Printer Server is not listed Advanced Configuration and Management QuicksetClient PC Configuration Wireless Settings for client PCsAd-hoc Mode Infrastructure Mode WEP SettingsPrinting Methods Which printing method should I use?Checking your Network Protocols Windows Network Configuration Setup Windows Peer-to-peer Print DriverConfigure Printer Port If your LevelOne Printer Server is not listedManagement Port OptionsPort BannerRetry Interval Windows SMB Printing Network NeighborhoodWindows with Server-based Print Queues Printing from MS-DOS ProgramsWindows using Ndps Ndps Manager ClientAppleTalk Setup Advanced Setup and ManagementMacintosh AppleTalk Software RequirementsAppleTalk Settings Communication Protocol. Enter no for Ascii or YES for BinaryPage BiAdmin Management Utility InstallationRequirements Additional RecommendationsOperation Main ScreenGroups Device List Status IconsConfiguration Icons TCP/IP ConfigurationAppleTalk Configuration Device InformationMenu Options InitDevice Menu Configuration Menu Diagnostics menuControl Menu Print TestWeb Interface Setup PreparationConnecting to the LevelOne Printer Server Configuration ScreensAppleTalk If Error NetBEUIDomain Name Response TimeLevelOne Printer Server Mode NetWareGeneral Snmp Simple Network Management Protocol Management StationsTrap Receivers ConnectionConfigure Server PasswordEnable Protocols Server NameWireless Screen Configuration WEP Data Privacy Authentication 128 Bit Key Serial Port Configuration Other ScreensServer Status Printer PortsSpecial Features IPP Server ConfigurationInternet Printing Protocol IPP IPP Client Setup Windows 95/98/ME/NT Installing from the CD-ROMInstalling using IPPCLIENT.EXE IPP Client Configuration Windows 95/98/ME/NTChanging the IPP Port Settings Open the Printers folder Start Settings PrintersIPP Client Setup Windows Parallel Port 3 if existsUsing IPP Printers Windows 2000 No printer driverInternet Mail Printing System RequirementsMail Server Internet LevelOne Printer ServerInternet Mail Printing Configuration Installation User Software User SoftwarePort Name Using the new Port Canceling a Print Job Printing through the InternetChecking the Printer Driver Configuring the LevelOne Printer Server for Snmp Snmp SettingsManagement Station Settings Trap Receiving Station SettingsWireless Configuration Required configurationModels WPS-0100 & WPS-0100USB WEP Settings BiAdmin Wireless Screen WEP Disabled EnabledEncryption Wireless Link Info Screen Link Info ScreenTroubleshooting Hardware & LAN ProblemsProblem No All the LevelOne Printer Servers LEDs are off If using TCP/IPAppleTalk Macintosh Page Novell NetWare Windows Printing Problems To remove an existing printer port installationPage ∙ Then select File Properties Details Problem No Specifications General SpecificationsEnvironmental Specifications all Models WPS-0100Parallel Port Pin Assignments Other ModelsFeature Support Protocol SupportNetwork Server Configuration Regulatory ApprovalsWindows NT Server Preparing for TCP/IP PrintingAdding a TCP/IP Remote Printer WindowsConfiguration Methods Bindery or NDS Setup WizardWindows 2000 Server Configuration Data BiAdminNovell Remote Printer Mode Other MethodsSetup for Ndps NetWare Novell LevelOne Printer Server ModeOverview Creating an Ndps Manager ObjectCreating an Ndps Printer Agent At the Identification page, click the Printer Agent ListSelect Novell Printer Gateway in the Gateway Type. see above Unix Systems ∙ LPD ∙ FTP