3:Installation of PremierWave XN
This chapter describes how to install the PremierWave XN device server. It contains the following sections:
Package Contents
Hardware Components
Installing the PremierWave XN
Package Contents
The PremierWave XN package includes the following items:
One PremierWave XN device
One Power Supply 12 VDC with international adapters
Two External Antenna, RPSMA Connector
One
Quick Start Guide
User-Supplied Items
To complete your installation, you need the following items:
A serial cable, as listed below, for each serial device. One end of the cable must have a female DB9 connector for the serial port.
-A null modem cable to connect the serial port to another DTE device.
-A
An available connection to your Ethernet network and an Ethernet cable.
A working AC power outlet if the unit will be powered from an AC power adapter.
Hardware Components
Front/Top Panel
Figure 3-1 shows the top panel view of the PremierWave XN. Table 3-6, Table 3-7, Table 3-8, Table 3-9 and Table 3-10 list and explain the behavior of the LEDs on the top panel.
PremierWave XN User Guide | 17 |