
|
| 11: Maintenance and Diagnostics Settings |
|
| Table |
|
|
|
| Diagnostics: Ping Settings | Description |
| Host | Enter the IP address or host name for the PremierWave to ping. |
|
|
|
| Count | Enter the number of ping packets PremierWave should attempt to send |
|
| to the Host. The default is 5. |
|
|
|
| Timeout | Enter the time, in seconds, for the PremierWave to wait for a response |
|
| from the host before timing out. The default is 5 seconds. |
|
|
|
| To Ping a Remote Host |
|
| Using Web Manager |
|
To ping a Remote Host, gclick Diagnostics in the menu and select Ping.
Using the CLI
To enter the command level: enable
Using XML
Not applicable.
Traceroute
Here you can trace a packet from the PremierWave XN to an Internet host, showing how many hops the packet requires to reach the host and how long each hop takes. If you visit a web site whose pages appear slowly, you can use traceroute to determine where the longest delays are occurring.
| Table |
|
|
Diagnostics: | Description |
Traceroute Settings |
|
Host | Enter the IP address or DNS hostname. This address is used to show the path |
| between it and the PremierWave when issuing the traceroute command. |
|
|
Protocol | Specify the traceroute protocol. |
|
|
To Perform a Traceroute
Using Web Manager
To perform a Traceroute, gclick Diagnostics in the menu and select Traceroute.
Using the CLI
To enter the command level: enable
Using XML
Not applicable.
PremierWave XN User Guide | 79 |