9: Services Settings
FTP Settings
The FTP protocol can be used to upload and download user files, and upgrade the PremierWave XN firmware. A configurable option is provided to enable or disable access via this protocol.
| Table |
|
|
FTP Settings | Description |
State | Select to enable or disable the FTP server: |
| Enabled (default) |
| Disabled |
|
|
To Configure FTP Settings
Using Web Manager
To configure FTP, gclick FTP in the menu.
Using the CLI
To enter the FTP command level: enable
Using XML
Include in your file: <configgroup name=”ftp server”>
Syslog Settings
The Syslog information shows the current configuration and statistics of the syslog. Here you can configure the syslog host and the severity of the events to log.
Note: The system log is always saved to local storage, but it is not retained through reboots unless diagnostics logging to the filesystem is enabled. Saving the system log to a server that supports remote logging services (see RFC 3164) allows the administrator to save the complete system log history. The default port is 514.
| Table |
|
|
Syslog Settings | Description |
|
|
State | Select to enable or disable the syslog: |
| Enabled |
| Disabled (default) |
|
|
Host | Enter the IP address of the remote server to which system logs are sent for |
| storage. |
|
|
Remote Port | Enter the number of the port on the remote server that supports logging |
| services. The default is 514. |
|
|
PremierWave XN User Guide | 61 |