Lantronix XN manual To Configure Wlan Profile WPA and WPA/IEEE802.11i Settings

	6: Network Settings
WLAN Profile WPA	Description
& WPA2 Settings
EAP-TTLS Option	Select the inner authentication method to be used with EAP-TTLS (if configured).
	 EAP-MSCHAPv2
	 MSCHAPv2
	 MSCHAP
	 CHAP
	 PAP
	 EAP-MD5
PEAP Option	Select the inner authentication method to be used with EAP-PEAP (if configured).
	 EAP-MSCHAPv2
	 EAP-MD5
Username	User ID for identifying the PremierWave XN to the RADIUS server in the network
Password	Select the password for identifying the PremierWave XN to the RADIUS server in
	the network.
Validate Certificate	Select to Enable or Disable. If enabled, the PremierWave XN will attempt to
	validate the certificate received from the RADIUS server.
Encryption	Select one or more encryption types, listed from strongest to least strong. At least
	one selection will have to match the Access Points intended to connect with.
	 CCMP = Uses AES as basis and is the strongest encryption option.
	 TKIP = Uses WEP as the basis, but adds extra checks and variations for added
	protection.
	 WEP = Based on RC4.
	Note: In case the encryption settings on the Access Point(s) can still be chosen,
	the capabilities of the Access Point(s) and the other clients that need to use the
	network need to be taken into account.
Credentials	Indicate the name of client certificate (required for EAP-TLS.) For more information
	about SSL certificates see sections, TLS (SSL) on page 92.

To Configure WLAN Profile WPA and WPA/IEEE802.11i Settings

Using Web Manager

To view or edit an existing WLAN Profile WPA setting, click WLAN Profiles on the menu, select an existing infrastructure profile and select WPA or WPA2/IEEE802.11i for the suite.

Using the CLI

To enter the wlan0 Profile WPAX command level: enable -> config -> wlan profiles -> edit <profile name or number> -> advanced -> security -> wpax or enable -> config -> wlan profiles -> edit <profile name or number> ->

security -> wpax

Using XML

Include in your file:

<configgroup name=”wlan profile” instance=”profile name”> and

<configitem name=”security”>

PremierWave XN User Guide 44