6: Network Settings
Using XML
Include in your file: <configgroup name="interface" instance="eth0">
Include in your file: <configgroup name="interface" instance="wlan0">
To View Network Interface Status
Using Web Manager
In Network Interface Status, you can view both the current operational settings as well as the settings that would take affect upon a device reboot.
To view Ethernet (eth0) Status, click Network on the menu and select Network 1
To view Wireless (wlan0) Status, click Network on the menu and select Network 2
Network Link Settings
Physical link parameters can be configured for an Ethernet (eth0) Network Interface (see Table
Table 6-2 Network 1 (eth0) Link Settings
Network 1 Ethernet (eth0) | Description |
Link Settings |
|
Speed | Select the Ethernet link speed. (Default is Auto) |
| Auto = |
| 10 Mbps = Force 10 Mbps |
| 100 Mbps = Force 100 Mbps |
|
|
Duplex | Select the Ethernet link duplex mode. (Default is Auto) |
| Auto = |
| Half = Force Half Duplex |
| Full = Force Full Duplex |
|
|
Notes:
When speed is Auto, duplex must be Auto or Half.
When speed is not Auto, duplex must be Half or Full.
Fixed speed Full duplex will produce errors connected to Auto, due to duplex mismatch.
SmartRoam
SmartRoam monitors the signal strengths of all
PremierWave XN User Guide | 34 |