|
| 6: Network Settings |
|
|
|
| WLAN Profile Basic Settings | Description |
| Delete (checkbox) | Click the Delete checkbox beside the profile(s) to be deleted. Three |
|
| buttons will appear: |
|
| Click the Submit button to permanently delete profile(s). |
|
| Click the Apply button to delete the profile for testing purposes. If the |
|
| device reboots, this change will not be applied. |
|
| Click the Cancel button to cancel this action, as desired. |
|
|
|
| Enabled (checkbox) | Click the Enabled checkbox beside the profile(s) to be enabled. Three |
|
| buttons will appear: |
|
| Click the Submit button to permanently enable profile(s). |
|
| Click the Apply button to enable the profile for testing purposes. If the |
|
| device reboots, this change will not be applied. |
|
| Click the Cancel button to cancel this action, as desired. |
|
|
|
| WLAN Profile | Click on a specific WLAN Profile name to edit the WLAN profile basic |
| (link to specific profile) | settings (see Table |
|
| |
|
|
|
| Table | |
|
|
|
| WLAN Profile Basic Settings | Description |
| Network Name (SSID) | Specify the name of the wireless network (SSID.) |
|
| Warning: Creating a new profile with a |
|
| name will cause the original network name and associated profile |
|
| to be overwritten. |
|
|
|
| State | Select to Enable or Disable. |
|
|
|
| Topology | Specify Infrastructure (ESS) or Adhoc (IBSS) mode. |
|
| Infrastructure: mode that communicates with access points. |
|
| Adhoc: mode that communicates with other clients. |
|
|
|
| Channel | Specify the channel for an Adhoc network. |
|
| Note: This setting only applies to the creation of an Adhoc network. |
|
|
|
| Scan 2.4 GHz Band | Select to Enable or Disable scanning for a WLAN profile on the 2.4 GHz |
|
| band. |
|
| Note: Setting this value to “Disabled” prevents this profile from |
|
| connecting to any device operating in the 2.4 GHz band. |
|
|
|
| Scan 5 GHz Band | Select to Enable or Disable scanning for a WLAN profile on the 5 GHz |
|
| band. |
|
| Note: Setting this value to “Disabled” prevents this profile from |
|
| connecting to any device operating in the 5 GHz band. |
|
|
|
| Scan DFS Channels | Select to Enable or Disable scanning on the DFS (Dynamic Frequency |
|
| Selection) channels in the 5 GHz band. |
|
| Note: This setting only applies if scanning in the 5 GHz band is enabled. |
|
|
|
To Configure WLAN Profile Basic Settings
Using Web Manager
To view or edit an existing WLAN profile or to create a new profile, click WLAN Profiles on the menu and select an existing profile.
PremierWave XN User Guide | 39 |