Lantronix XN manual Current Settings Description

Page 26

4: Using DeviceInstaller

Current Settings (continued)

Description

 

Configurable field. Enter a group to categorize the PremierWave.

Group

Double-click the field, type in the value, and press Enter to complete.

This group name is local to this PC and is not visible on other PCs or

 

 

laptops using DeviceInstaller.

 

 

 

Configurable field. Enter comments for the PremierWave. Double-click

Comments

the field, type in the value, and press Enter to complete. This description

or comment is local to this PC and is not visible on other PCs or laptops

 

 

using DeviceInstaller.

 

 

Device Family

Shows the PremierWave device family type as “PremierWave”.

 

 

Type

Shows the device type as “PremierWave”.

 

 

ID

Shows the PremierWave ID embedded within the unit.

 

 

Hardware Address

Shows the PremierWave hardware (MAC) address.

 

 

Firmware Version

Shows the firmware currently installed on the PremierWave.

 

 

Extended Firmware Version

Provides additional information on the firmware version.

 

 

 

Shows the PremierWave status as Online, Offline, Unreachable (the

Online Status

PremierWave is on a different subnet), or Busy (the PremierWave is

 

currently performing a task).

 

 

IP Address

Shows the PremierWave current IP address. To change the IP address,

click the Assign IP button on the DeviceInstaller menu bar.

 

 

 

 

Appears “Dynamically” if the PremierWave automatically received an IP

 

address (e.g., from DHCP). Appears “Statically” if the IP address was

IP Address was Obtained

configured manually.

If the IP address was assigned dynamically, the following fields appear:

 

 

Obtain via DHCP with values of True or False.

 

Obtain via BOOTP with values of True or False.

 

 

Subnet Mask

Shows the subnet mask specifying the network segment on which the

PremierWave resides.

 

 

 

Gateway

Shows the IP address of the router of this network.

There is no default.

 

 

 

Number of Ports

Shows the number of serial ports on this PremierWave.

 

 

Supports Configurable Pins

Shows False, indicating configurable pins are not available on the

PremierWave XN.

 

 

 

Supports Email Triggers

Shows True, indicating email triggers are available on the PremierWave.

 

 

Telnet Supported

Indicates whether Telnet is enabled on this PremierWave.

 

 

Telnet Port

Shows the PremierWave port for Telnet sessions.

 

 

Web Enabled

Indicates whether Web Manager access is enabled on this

PremierWave.

 

 

 

Web Port

Shows the PremierWave port for Web Manager configuration (if Web

Enabled field is True).

 

 

 

Firmware Upgradable

Shows True, indicating the PremierWave firmware is upgradable as

newer versions become available.

 

 

 

PremierWave XN User Guide

26

Image 26
Contents XN User Guide Contacts WarrantyCopyright & Trademark DisclaimerInstallation of PremierWave XN Table of ContentsUsing This Guide Using DeviceInstallerLine and Tunnel Settings Configuration Using Web ManagerNetwork Settings Security Settings Terminal and Host SettingsServices Settings Maintenance and Diagnostics Settings Security in Detail Advanced SettingsBridging Branding the PremierWave XN VIP SettingsUpdating Firmware 103List of Figures PremierWave XN Product LabelList of Tables PremierWave XN User Guide Summary of Chapters Using This GuidePurpose and Audience Chapter DescriptionAdditional Documentation Document DescriptionApplications Key FeaturesIntroduction Protocol SupportAddresses and Port Numbers Troubleshooting CapabilitiesConfiguration Methods Hardware AddressPort Numbers Product Information LabelIP Address User-Supplied Items Installation of PremierWave XNPackage Contents Hardware ComponentsSignal Strength LEDs Button pin holeRight LED PowerLeft LED SerialWPS Status Indicator Wlan Signal Strength Indicator at 5 GHzWlan Signal Strength Indicator at 2.4 GHz Back Panel 10 Diagnostic LED IndicationsFault Conditions Blink Pattern Wi-Fi Protected Setup WPS To Start WPSPerform the following steps to install your device Installing the PremierWave XNTo Cancel WPS To Show WPS Status13 PremierWave XN Dimensions in Millimeters mm Device Detail Summary Using DeviceInstallerAccessing PremierWave XN Using DeviceInstaller IP address was obtained dynamicallyCurrent Settings Description To access Web Manager, perform the following steps Configuration Using Web ManagerAccessing Web Manager Device Status Web Manager Components Help AreaNavigating Web Manager Web Manager Description SeeSmartRoam Protocol StackQuery Port SyslogNetwork Interface Settings Network SettingsNetwork Interface Settings Network Interface Description SettingsTo Configure Network Interface Settings Network 1 Ethernet eth0 Description Link Settings Network Link SettingsNetwork 1 eth0 Link Settings To View Network Interface StatusNetwork 2 wlan0 Link Settings Network 2 Wlan wlan0 Description Link SettingsNetwork 2 Link Scan To Configure Network Link SettingsWlan Link Status and Scan Commands Network 2 Link Scan Results on WebManagerWlan Link Status Description To View Wlan Link Scan and Status InformationNetwork 2 Link Status Wlan Profiles To Configure Wlan ProfilesWlan Profile Basic Settings Description Creating, Deleting or Enabling Wlan ProfilesTo Configure Wlan Profile Basic Settings Wlan Profile Basic SettingsWlan Profile Advanced Settings Description To Configure Wlan Profile Advanced SettingsWlan Profile Advanced Settings 10 Wlan Profile Security Settings Wlan Profile Security SettingsTo Configure Wlan Profile Security Settings Wlan Profile Description Security Settings11 Additional WEP Settings for Wlan Profile Wlan Profile WEP SettingsTo Configure Wlan Profile WEP Settings Wlan Profile WEP Settings DescriptionWlan Profile WPA Description WPA2 Settings Wlan Profile WPA and WPA2/IEEE802.11i Settings12 Wlan Profile WPA and WPA2/IEEE802.11i Settings KeyTo Configure Wlan Profile WPA and WPA/IEEE802.11i Settings Wlan Quick Connect To Configure Wlan Quick ConnectWlan Quick Connect Description Settings 13 Wlan Quick ConnectLine Configuration Settings Line and Tunnel SettingsLine Settings Line Settings DescriptionLine Command Description Mode Settings To Configure Line SettingsLine Command Mode Settings Tunnel Serial Description Settings Line Settings Tunnel SettingsSerial Settings Line Settings to modify these settingsTunnel Packing Mode Settings To Configure Tunnel Serial SettingsPacking Mode Tunnel Serial Description SettingsSend Character To Configure Tunnel Packing Mode SettingsAccept Mode Trailing CharacterTunnel Accept Mode Settings Tunnel Accept Mode Description SettingsBlock Network To Configure Tunnel Accept Mode SettingsConnect Mode Email on ConnectReconnect Timer Tunnel Connect Mode SettingsTunnel Connect Mode Description Settings Flush Serial DataTunnel Disconnect Mode Settings To Configure Tunnel Connect Mode SettingsDisconnect Mode Tunnel Disconnect Description Mode SettingsTunnel Modem Description Emulation Settings To Configure Tunnel Disconnect Mode SettingsTunnel Modem Emulation Settings Modem EmulationTo View Tunnel Statistics To Configure Tunnel Modem Emulation SettingsStatistics Connect StringTerminal on Network and Line Settings Terminal and Host SettingsTerminal Settings To Configure the Terminal Line Connection Host ConfigurationTo Configure the Terminal Network Connection Host ConfigurationRemote Address To Configure Host SettingsSSH Username Remote PortTo View or Configure DNS Settings Services SettingsDNS Settings DNS SettingsTo Configure FTP Settings FTP SettingsSyslog Settings FTP SettingsHttp Settings Http SettingsTo View or Configure Syslog Settings Http Settings DescriptionTo Configure Http Settings Http Authentication Settings RSS SettingsTo Configure Http Authentication RSS SettingsTo Configure RSS Settings RSS Settings Description Security SettingsSSH Settings SSH Server Host KeysSSH Client Known Hosts SSH Client Known HostsSSH Server Authorized Users SSH Server Authorized Users Remote CommandSSH Client Users SSH Client UsersSSL Settings To Configure SSH SettingsCertificate and Key Generation Certificate and Key Generation SettingsCertificate Generation Description Settings To Create a New CredentialUpload Certificate Settings Certificate Upload SettingsTo Configure an Existing SSL Credential Upload Description Certificate SettingsTo Upload an Authority Certificate Trusted Authority SettingsTrusted Authorities File Display Settings Maintenance and Diagnostics SettingsFilesystem Settings File DisplayFile Modification File Modification SettingsFile Transfer Settings File TransferTo Configure IP Network Stack Settings Protocol Stack SettingsIP Settings IP Network Stack SettingsARP Settings Icmp SettingsTo Configure Icmp Network Stack Settings To Configure ARP Network Stack SettingsTo Configure Query Port Settings Smtp SettingsTo Configure Smtp Network Stack Settings Query Port SettingsIP Sockets DiagnosticsHardware To View Hardware Information To View the List of IP SocketsTo Ping a Remote Host Ping Settings10 Traceroute Settings TracerouteLog To Configure the Diagnostic Log Output11 Log Settings MemoryTo View Process Information ThreadsProcesses To View Thread Information12 System Settings System SettingsTo Reboot or Restore Factory Defaults System Settings DescriptionTo View, Configure and Send Email Advanced SettingsEmail Settings Email ConfigurationTo View and Configure Basic CLI Settings Command Line Interface SettingsBasic CLI Settings CLI Configuration SettingsTelnet Settings To Configure Telnet SettingsSSH Settings SSH SettingsXML Exporting Configuration XML SettingsXML Export Configuration XML Export Configuration Description SettingsXML Export Status To Export Configuration in XML FormatXML Export Status Description Settings To Export in XML FormatImport Configuration from the Filesystem XML Import ConfigurationImport Configuration from External File To Import Configuration in XML FormatBridging Bridging ConfigurationTo configure and enable bridging Bridge Settings Bridge ConfigurationTo View or Configure Bridge Settings Wlan Profile WPA & WPA2 Description Settings Include in your file configgroup name=bridge instance=br0 Digital Certificates Security in DetailPublic Key Infrastructure Trusted AuthoritiesCertificate Formats Obtaining CertificatesSelf-Signed Certificates OpenSSLSteel Belted Radius Free RadiusUpdating Firmware Obtaining Firmware Loading New Firmware through FTPTo Configure VIP Settings VIP SettingsVirtual IP VIP Configuration Virtual IP VIP StatusVIP Counters Virtual IP VIP CountersTo View VIP Counters VIP Counters DescriptionBranding the PremierWave XN Web Manager CustomizationTo Customize Short or Long Names Short and Long Name SettingsShort and Long Name Customization Technical Support Europe, Middle East, Africa Appendix a Technical SupportTechnical Support US Conversion Table Appendix B Binary to Hexadecimal ConversionsConverting Binary to Hexadecimal Scientific CalculatorAppendix B Binary to Hexadecimal Conversions Appendix C Compliance Manufacturers Contact RoHS Notice
Related manuals
Manual 1 pages 1.27 Kb