Lantronix XN manual Wi-Fi Protected Setup WPS, To Start WPS

3: Installation of PremierWave XN

Figure 3-11 PremierWave XN Bottom/Back Panel View

V-

V+

Antenna	Terminal	Barrel
			Ethernet	Antenna
	Block	Plug
	Power	Power
	(3-pin)

Wi-Fi Protected Setup (WPS)

Using WPS, you have the option of connecting to PremierWave devices with a router or access point in a single operation instead of manually creating a profile with a network name (SSID), setting up wireless security parameters and updating the choice list.

Figure 3-12 PremierWave XN WPS Button

WPS Button

(pin hole opening)

To Start WPS

Using the Device

1.Place the end of a paper clip or similar object into the WPS opening (see Figure 3-12)and press and hold down for a minimum of 5 seconds.

2.Remove the paper clip to release the button. The unit will start Wi-Fi Protected Setup.

PremierWave XN User Guide 22