Lantronix XN manual Query Port, Smtp Settings, To Configure Smtp Network Stack Settings

			11: Maintenance and Diagnostics Settings
SMTP Settings
		Table 11-7 SMTP Network Stack Settings
	Protocol Stack SMTP		Description
	Settings
	Relay Address		Address of all outbound email messages through a mail server. Can contain
			either a hostname or an IP address.
	Relay Port		Port utilized for the delivery of outbound email messages.

To Configure SMTP Network Stack Settings

Using Web Manager

To configure SMTP protocol settings, gclick Protocol Stack in the menu and select SMTP.

Using the CLI

To enter the command level: enable -> config -> smtp

Using XML

Include in your file: <configgroup name=”smtp”>

Query Port

The query port (UDP port 0x77FE) is used for the automatic discovery of the device by the DeviceInstaller utility. Only 0x77FE discover messages from DeviceInstaller are supported. For more information on DeviceInstaller, see Chapter 4: Using DeviceInstaller on page 25.

	Table 11-8 Query Port Settings
Query Port Settings	Description
State	Enables or disables listening and responding to query port messages. Select
	On or Off.

To Configure Query Port Settings

Using Web Manager

To view Query Port settings or to switch the Query Port Server on or off, gclick Query Port in the menu.

Using the CLI

 To enter the Query Port command level: enable -> config -> query port

PremierWave XN User Guide 77