Lantronix XN manual To Configure Wlan Profile Advanced Settings

6: Network Settings

Using the CLI

To enter the wlan0 Profile command level: enable -> config -> wlan profiles

-> edit <profile number> or enable -> config -> wlan profiles -> edit <profile name>

Using XML

Include in your file:

<configgroup name=”wlan profile” instance=”profile name”> and

<configitem name=”basic”>

Table 6-9 WLAN Profile Advanced Settings

WLAN Profile Advanced Settings	Description
TX Data Rate Maximum	Specify the rate for data transmission.
	Note: This setting only applies if ‘TX Data Rate’ is set to ‘Fixed’.
TX Data Rate	Specify the type of transmission data rate:
	 Fixed = keeps the transmission rate at the configured value.
	 Auto-reduction= allows the PremierWave to reduce the data rate
	automatically, depending on link quality.
TX Power Maximum	Specify the maximum transmission output power in dBm.
Antenna Diversity	Select the antenna the radio will use or allow PremierWave XN to
	automatically make the selection.
	 Enabled = allow the PremierWave to select the antenna.
	 Antenna 1 = use the internal antenna.
	 Antenna 2 = use the external antenna.
Power Management	Select to Enable or Disable power management, which reduces the
	overall power consumption of the PremierWave unit, but can increase
	latency.
	 Enabled = allows the PremierWave to turn off the receiver when it
	is idling.
	 Disabled = keeps the receiver on at all times.
Power Management Interval	Select number of beacons (100 msec interval) between 1 and 10.
	The above-mentioned latency can be up to this number “X” 100
	msec.

To Configure WLAN Profile Advanced Settings

Using Web Manager

To view or edit an existing WLAN Profile, click WLAN Profiles on the menu and select an existing profile.

Using the CLI

To enter the wlan0 Profile Advanced command level: enable -> config -> wlan profiles -> edit <profile name or number> -> advanced

PremierWave XN User Guide 40