Lantronix XN manual Host Configuration, To Configure the Terminal Network Connection

8: Terminal and Host Settings

To Configure the Terminal Network Connection

Using Web Manager

To configure the Terminal on Network, click Terminal on the menu and select Network -> Configuration.

Using the CLI

To enter the Terminal Network command level: enable -> config -> terminal network

Using XML

Include in your file: <configgroup name=”terminal” instance=”network”>

To Configure the Terminal Line Connection

Note: The following section describes the steps to view and configure Terminal 1 settings; these steps apply to other terminal instances of the device.

Using Web Manager

To configure a particular Terminal Line, click Terminal on the menu and select Line 1 -> Configuration.

Using the CLI

To enter the Terminal Line command level: enable -> config -> terminal 1

Using XML

Include in your file: <configgroup name=”terminal” instance=”1”>

Host Configuration

	Table 8-2 Host Configuration
Host Settings	Description
Name	Enter a name for the host. This name appears on the Login Connect
	Menu. To leave a host out of the menu, leave this field blank.
Protocol	Select the protocol to use to connect to the host. Choices are:
	 Telnet
	 SSH
	Note: SSH keys must be loaded or created in SSH for the SSH
	protocol to work.

PremierWave XN User Guide 58