|
| 6: Network Settings |
|
|
|
| WLAN Link Scan Results Field | Description |
| RSSI | The instantaneous Received Signal Strength Indicator (RSSI) of the |
|
| device measured in dBm. |
|
| Note: RSSI reported in scan results is a single sampling, while the |
|
| RSSI reported in the 'status' command (showing the signal strength of |
|
| the currently connected AP) is averaged over time. |
|
|
|
| Security Suite | Indicates the security suite in use by the device as well as whether it is |
|
| operating in Adhoc (IBSS) mode. |
|
|
|
The results of the status command are presented in the following format:
| Table | |
|
|
|
WLAN Link Status |
| Description |
Connection State |
| Indicates the connection state. |
|
|
|
BSSID |
| A unique identifier for the Basic Service Set corresponding to the |
|
| MAC address of the Access Point in infrastructure mode, or a |
|
| generated value in Adhoc mode. |
|
|
|
SSID |
| The Service Set Identifier of the connected network. |
|
|
|
Topology |
| The type of wireless network in use for the current association |
|
| (Adhoc or Infrastructure). |
|
|
|
Active WLAN Profile |
| Indicates which WLAN profile created the current connection to |
|
| the wireless network. |
|
|
|
Pairwise Cipher |
| The standard used to encrypt a particular type of data in the |
|
| current wireless association. |
|
|
|
Group Cipher |
| The standard used to encrypt a particular type of data in the |
|
| current wireless association. |
|
|
|
Authentication |
| Indicates the method of distributing encryption key material. |
|
|
|
Security Suite |
| Indicates the security suite used for the current association. |
|
|
|
Channel |
| The channel used for the current association. |
|
|
|
IP Address |
| The IP address assigned to the PremierWave. |
|
|
|
RSSI |
| A measure of the power level of the received radio signal in dBm, |
|
| specifically the RSSI of the currently associated AP averaged |
|
| over time. |
|
| Note: RSSI reported in scan results is a single sampling, while |
|
| the RSSI reported in the 'status' command (showing the signal |
|
| strength of the currently connected AP) is averaged over time. |
|
|
|
WPS Mode |
| Indicates whether WPS is activated. |
|
|
|
To View WLAN Link Scan and Status Information
Using Web Manager
To scan the Wireless (wlan0) Link, click Network in the menu and select Network 2
To view the Wireless (wlan0) Link status information, click Network in the menu and select Network 2
PremierWave XN User Guide | 37 |