Vincent Audio SV-234 manuel dutilisation Front View

Page 27

FRONT VIEW

1

2

3

4

5

6

7

8

1.SPEAKER A/B

If suitable speakers are used, a second pair of speakers can be operated at the same time. This button allows each of the speaker pairs (designated A and B) to be individually switched on and off. The LED located above each of the buttons shows which of the speaker pairs is active.

2.Display

In normal use the display shows the name of the selected input, the volume and the opera- ting mode (Audio Mute). When adjustments are being made (e.g. to BALANCE, GAIN), the relevant values are displayed.

3.LEVEL￿/￿: Volume keys

These are the keys for the adjustment of the main volume level of the system. They conse- quently control the volume of the loudspeakers and the signal of the stereo preamplifier out- put "PRE OUTPUT". Only for the playback of the audio source at the input "LINE5" the volume setting has no effect.

4.„LINE1“ … „LINE5“ and "BALANCED": Input selection With a touch on one of these buttons you choose for playback the audio source attached to the corresponding connec- tors at the amplifier's backside.

5.POWER

This is the main power switch for turning on and off the device. Please take note of the information about it in the sections "Installation" and "Operating the device".

6.LED signaling display shut-off

This LED remains illuminated when the display is switched off by the “DIMMER” (7) function. That helps to not misinterpret a shut-off display as consequence of a shut-off device.

7.DIMMER: Brightness setting for the display

The brightness of the front panel display can be reduced in two steps using this button.

If you press it repeatedly, the third actuation switches off the display. With a fourth stroke, the maximum display brightness will be restored again.

8.CHANNEL: Channel Balance

These are the buttons that enable you to set a volume difference between the left and the right stereo channel ("BALANCE").

Vincent 27

Image 27
Contents Vincent Sehr geehrter Kunde Dear CustomerCher client INHALTSVERZEICHNIS/CONTENTS/SOMMAIRE Aus/Anschalten Wartung/VeränderungenAlle Betriebsmittel, die an die Netzspannung Netzkabel/AnschlussErklärungen/Hinweise Erläuterung der grafischen SymboleWeitere Hinweise CE-ZeichenBeschreibung DES Gerätes LieferumfangLEVEL/ Lautstärketasten Power NetzschalterVorderansicht AnzeigeRückansicht Power ControlBatterien FernbedienungHören möchten Gain Taste für -8dB Abschwächung aller AusgangssignaleTasten DER Fernbedienung EingangswahltastenZUR Besonderen Beachtung InstallationAnschluss Eines Quellgerätes MIT STEREO-XLR-AUSGANG Anschluss DER Quellgeräte MIT CINCH-HOCHPEGELAUSGANGKabelverbindungen FÜR DIE Einschaltsteuerung Power Control SV-234 Endverstärker Anschluss Zweier Zusätzlicher Endstufenkanäle Anschluss Eines AufnahmegerätesAnschluss DER Lautsprecher Anschluss DES Netzkabels Bedienung DES Gerätes Helligkeit der Und die Lautstärkeschritte sind zu grobGain Und REC Output 13 werden kleinerWeitere Tipps Einspielzeit/AufwärmenNetzbrummen Fehlersuche Symptom Mögliche Fehlerursache AbhilfeTechnische Daten Audio-Quellen/Audio-Quellgeräte LEXIKON/WISSENSWERTESSafety Guidelines Other Instructions Description of the Appliance Included in DeliveryFront View PRE Output Preamplifier Output Rear ViewSpeaker Loudspeaker terminals If desired, you can connect a recording deviceOld New Remote ControlUsing batteries BatteriesInput Selector Buttons Buttons of the Remote ControlLevel and Level Volume keys MuteRCA connections Do not connect PRE OUT and MainSpeaker cable connections Protective capsConnection of ONE Audio Source with XLR Output Connections for the Standby Control Power Control SV-234 is intended to react to the trigger signal Connection of TWO Additional Main Amplifier Channels Connection of a Recording DeviceConnection of the Loudspeakers Connection of the Power Cable Operating the Appliance Gain -08dB ← ... → Gain -00dB Signal output of the preamplifier PRE OutputCorresponding remote controller buttons as well as using PRE Output 14 is smallerTips Burn in/ Warm upNet frequency noise Symptom Possible Cause Countermeasure Search for ErrorsTechnical Specifications Audio Sources/Source devices GlossaryHumidité/Chaleur/Vibrations Consignes DE SecuriteEntretien/Modifications Câble dalimentation/BranchementExplications/Remarques Explication des symboles graphiquesAutres Consignes Sigle CEDescription DE Lappareil Objet DE LA LivraisonLEVEL/ touches de volume Facade AvantAffichage Facade Arriere Speaker bornes de raccordementInput Balanced entrée XLR Piles TelecommandeTouches DE LA Télécommande Level et Level touches de volumeQuand l’entrée Line 5 Main Input est sélec- 19 tionnée Fiches de raccordements Pas de nécessité de liaison préampli, ampli de puissanceDépose du capot de protection Prises RCARaccordement D’UN Appareil Source Avec LA Sortie STEREO-XLR Amplificateur stéréo SV-234 Par ex. amplificateur Raccordement D’UN Appareil D’ENREGISTREMENT Branchement DES HAUT-PARLEURS Branchement DU Câble Dalimentation Commandes DE L‘APPAREIL De niveau Le volume a été augmentéProgressivité du réglage est trop grossière 8dB amortissement’expérience montre que ce phénomène est soit dû ConseilsTemps de rodage / échauffement Ronflement du secteurSymptôme Cause possible du défaut Remède Resolution DE ProblemesCaracteristiques Techniques Sources audio/lecteurs sources Lexique / BON a SavoirVincent

SV-234 specifications

The Vincent Audio SV-234 is a high-end integrated amplifier that embodies a blend of modern technology and classic audio performance, appealing to both audiophiles and casual listeners alike. This sophisticated device is designed to provide pure, dynamic sound reproduction while integrating seamlessly with various audio sources and systems.

One of the key features of the SV-234 is its dual-mono design, which enhances soundstage and imaging. The separate amplifier sections for left and right channels ensure minimal crosstalk, leading to a more immersive listening experience. This design principle is essential for delivering a clean and accurate audio signal, effectively minimizing distortion and maximizing fidelity.

The amplifier boasts an impressive power output, rated at 2 x 150 watts into 8 ohms and 2 x 240 watts into 4 ohms. This significant power output allows the SV-234 to drive a wide range of speakers effortlessly, making it suitable for various configurations, from compact bookshelf speakers to larger floor-standing models. In addition to power, the unit's class AB amplification technology provides a warm and engaging sound that appeals to discerning listeners.

In terms of connectivity, the Vincent Audio SV-234 is equipped with an array of inputs, including multiple line-level analog inputs, a phono input for turntables, and digital inputs, including USB, coaxial, and optical. This extensive selection makes it easy for users to integrate the amplifier into their existing audio setup, allowing for playback from various sources, such as CD players, streaming devices, and computers.

The SV-234 is also designed with user-friendly features, such as a remote control and a clear, intuitive front panel layout. The built-in digital-to-analog converter (DAC) enhances sound quality when using digital sources, ensuring that users receive the best possible listening experience regardless of the input method.

In terms of build quality, the SV-234 features a sturdy, elegant chassis that is both aesthetically pleasing and robust enough to withstand everyday use. The combination of high-quality components and innovative technologies makes this amplifier a testament to Vincent Audio's commitment to creating exceptional audio products.

Ultimately, the Vincent Audio SV-234 is a remarkable integrated amplifier that combines power, versatility, and exceptional sound quality. Its advanced features and thoughtful design make it an ideal choice for anyone seeking to elevate their audio experience.