Vincent Audio SV-234 manuel dutilisation Remote Control, Batteries, Using batteries, Old New

Page 29

REMOTE CONTROL

Point the front of the remote control directly at the front of the appliance, making sure there are no objects between the remote control and the appliance.

The distance between the remote control and the appliance should not be more than 7 m, as the reliability of the remote control is affected beyond this range.

Make sure that you do not point the remote control at an angle to the appliance, as beyond an angle of ±30° to the centre axis the appliance may not respond as well to the remote control. Change both batteries if the distance at which the remote control can be used effectively decreases.

BATTERIES

Using batteries

Handling batteries incorrectly can cause battery acid to escape or an explosion in extreme cases. The batteries must be correctly inserted taking note of the polarity, which is marked in the inside of the battery compartment.

In order to make full use of the batteries’ life, do not mix new and used batteries. Make sure that you insert batteries of the same type.

Some batteries are rechargeable, others are not however. Take note of the precautions and instruc- tions that are included on all batteries.

Remove the batteries if the remote control is not going to be used for a long time.

Under no circumstances must batteries be short-cir- cuited, taken apart or heated up.

For environmental reasons, used batteries should be disposed of in accordance with local environ- mental regulations and not put with domestic waste.

Only use AAA (LR3) size batteries.

Changing/Inserting batteries:

a)Open and remove the battery compartment lid of the remote control by tugging sharply on the fishpla- te on the edge of the remote control. The battery compartment lid is held in place magnetically, there is no need to loosen the screws!

a

b)If necessary, remove used batteries and insert new ones correctly as shown by the diagram in the battery compartment.

old

b

new

 

 

c) Put the compartment cover back on and close the battery compartment.

c

Vincent 29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Vincent Cher client Sehr geehrter KundeDear Customer INHALTSVERZEICHNIS/CONTENTS/SOMMAIRE Alle Betriebsmittel, die an die Netzspannung Wartung/VeränderungenNetzkabel/Anschluss Aus/AnschaltenWeitere Hinweise Erläuterung der grafischen SymboleCE-Zeichen Erklärungen/HinweiseBeschreibung DES Gerätes LieferumfangVorderansicht Power NetzschalterAnzeige LEVEL/ LautstärketastenRückansicht Power ControlBatterien FernbedienungTasten DER Fernbedienung Gain Taste für -8dB Abschwächung aller AusgangssignaleEingangswahltasten Hören möchtenZUR Besonderen Beachtung InstallationAnschluss Eines Quellgerätes MIT STEREO-XLR-AUSGANG Anschluss DER Quellgeräte MIT CINCH-HOCHPEGELAUSGANGKabelverbindungen FÜR DIE Einschaltsteuerung Power Control SV-234 Endverstärker Anschluss Zweier Zusätzlicher Endstufenkanäle Anschluss Eines AufnahmegerätesAnschluss DER Lautsprecher Anschluss DES Netzkabels Bedienung DES Gerätes Gain Und die Lautstärkeschritte sind zu grobUnd REC Output 13 werden kleiner Helligkeit derNetzbrummen Weitere TippsEinspielzeit/Aufwärmen Fehlersuche Symptom Mögliche Fehlerursache AbhilfeTechnische Daten Audio-Quellen/Audio-Quellgeräte LEXIKON/WISSENSWERTESSafety Guidelines Other Instructions Description of the Appliance Included in DeliveryFront View Speaker Loudspeaker terminals Rear ViewIf desired, you can connect a recording device PRE Output Preamplifier OutputUsing batteries Remote ControlBatteries Old NewLevel and Level Volume keys Buttons of the Remote ControlMute Input Selector ButtonsSpeaker cable connections Do not connect PRE OUT and MainProtective caps RCA connectionsConnection of ONE Audio Source with XLR Output Connections for the Standby Control Power Control SV-234 is intended to react to the trigger signal Connection of TWO Additional Main Amplifier Channels Connection of a Recording DeviceConnection of the Loudspeakers Connection of the Power Cable Operating the Appliance Corresponding remote controller buttons as well as using Signal output of the preamplifier PRE OutputPRE Output 14 is smaller Gain -08dB ← ... → Gain -00dBNet frequency noise TipsBurn in/ Warm up Symptom Possible Cause Countermeasure Search for ErrorsTechnical Specifications Audio Sources/Source devices GlossaryEntretien/Modifications Consignes DE SecuriteCâble dalimentation/Branchement Humidité/Chaleur/VibrationsAutres Consignes Explication des symboles graphiquesSigle CE Explications/RemarquesDescription DE Lappareil Objet DE LA LivraisonAffichage LEVEL/ touches de volumeFacade Avant Input Balanced entrée XLR Facade ArriereSpeaker bornes de raccordement Piles TelecommandeQuand l’entrée Line 5 Main Input est sélec- 19 tionnée Touches DE LA TélécommandeLevel et Level touches de volume Dépose du capot de protection Pas de nécessité de liaison préampli, ampli de puissancePrises RCA Fiches de raccordementsRaccordement D’UN Appareil Source Avec LA Sortie STEREO-XLR Amplificateur stéréo SV-234 Par ex. amplificateur Raccordement D’UN Appareil D’ENREGISTREMENT Branchement DES HAUT-PARLEURS Branchement DU Câble Dalimentation Commandes DE L‘APPAREIL Progressivité du réglage est trop grossière Le volume a été augmenté8dB amortissement De niveauTemps de rodage / échauffement ConseilsRonflement du secteur ’expérience montre que ce phénomène est soit dûSymptôme Cause possible du défaut Remède Resolution DE ProblemesCaracteristiques Techniques Sources audio/lecteurs sources Lexique / BON a SavoirVincent

SV-234 specifications

The Vincent Audio SV-234 is a high-end integrated amplifier that embodies a blend of modern technology and classic audio performance, appealing to both audiophiles and casual listeners alike. This sophisticated device is designed to provide pure, dynamic sound reproduction while integrating seamlessly with various audio sources and systems.

One of the key features of the SV-234 is its dual-mono design, which enhances soundstage and imaging. The separate amplifier sections for left and right channels ensure minimal crosstalk, leading to a more immersive listening experience. This design principle is essential for delivering a clean and accurate audio signal, effectively minimizing distortion and maximizing fidelity.

The amplifier boasts an impressive power output, rated at 2 x 150 watts into 8 ohms and 2 x 240 watts into 4 ohms. This significant power output allows the SV-234 to drive a wide range of speakers effortlessly, making it suitable for various configurations, from compact bookshelf speakers to larger floor-standing models. In addition to power, the unit's class AB amplification technology provides a warm and engaging sound that appeals to discerning listeners.

In terms of connectivity, the Vincent Audio SV-234 is equipped with an array of inputs, including multiple line-level analog inputs, a phono input for turntables, and digital inputs, including USB, coaxial, and optical. This extensive selection makes it easy for users to integrate the amplifier into their existing audio setup, allowing for playback from various sources, such as CD players, streaming devices, and computers.

The SV-234 is also designed with user-friendly features, such as a remote control and a clear, intuitive front panel layout. The built-in digital-to-analog converter (DAC) enhances sound quality when using digital sources, ensuring that users receive the best possible listening experience regardless of the input method.

In terms of build quality, the SV-234 features a sturdy, elegant chassis that is both aesthetically pleasing and robust enough to withstand everyday use. The combination of high-quality components and innovative technologies makes this amplifier a testament to Vincent Audio's commitment to creating exceptional audio products.

Ultimately, the Vincent Audio SV-234 is a remarkable integrated amplifier that combines power, versatility, and exceptional sound quality. Its advanced features and thoughtful design make it an ideal choice for anyone seeking to elevate their audio experience.
Top Page Image Contents