Vincent Audio SV-234 manuel dutilisation Technical Specifications

Page 42

Symptom

Possible Cause

Countermeasure

 

 

 

Front panel display

It has been switched off before using

Press the button "DIMMER" (7) one more time.

does not work

"DIMMER" (7).

 

 

 

 

Poor sound quality

The cable connections are not tight, the

Check the cables and cable connections.

 

connectors are dirty or a cable is defective.

 

 

A record player has been connected to a high

Interconnect a phono preamplifier.

 

level input without using a phono preamplifier.

 

 

An audio source with standard line level

Use line level audio sources only at the

 

output is connected to the amplifier direct

inputs "LINE1"..."LINE4".

 

input "LINE5" (11).

 

 

 

 

The remote control

No batteries inserted in the remote control,

Check and replace the batteries if necessary.

cannot perform any

batteries are not inserted correctly or are

 

depleted.

 

functions

 

 

 

 

The line-of-sight between the remote control

Try to point the remote control at the front of

 

and the unit is obstructed, the range was

the unit only when the sight-line is clear,

 

exceeded or the hand unit was operated from

within a 7-metre distance and, if possible,

 

a position too far to one side.

facing the unit.

 

The unit is not switched on.

Switch on the unit.

 

 

 

Humming low

See section "Net frequency noise" in the chapter "Tips".

frequency noise is

 

 

audible, even as

 

 

no audio source is

 

 

playing back

 

 

 

 

 

TECHNICAL SPECIFICATIONS

Frequency response:

20 Hz - 20 kHz ±0,5 dB

Nominal Output Power at 8Ω:

200 W

Nominal Output Power at 4Ω:

289 W

Input sensitivity:

400 mV

Total Harmonic Distortion:

< 0.1%

Signal to Noise Ratio:

>90 dB

Input Impedance:

47 kΩ

AC power connection type:

220-240V/50Hz

Inputs:

4x

RCA stereo, 1x RCA Main Input stereo,

 

1x

XLR stereo, 1x Power Control (3,5 mm jack)

Outputs:

Speaker connectors accepting 4 speakers,

 

1x

PRE stereo RCA, 1x REC stereo RCA,

 

2x

Power Control (3,5 mm jack)

Dimensions:

430 x 142 x 450 mm

Weight:

20 kg

Colour:

silver / black

42Vincent

Image 42
Contents Vincent Sehr geehrter Kunde Dear CustomerCher client INHALTSVERZEICHNIS/CONTENTS/SOMMAIRE Netzkabel/Anschluss Wartung/VeränderungenAlle Betriebsmittel, die an die Netzspannung Aus/AnschaltenCE-Zeichen Erläuterung der grafischen SymboleWeitere Hinweise Erklärungen/HinweiseLieferumfang Beschreibung DES GerätesAnzeige Power NetzschalterVorderansicht LEVEL/ LautstärketastenPower Control RückansichtFernbedienung BatterienEingangswahltasten Gain Taste für -8dB Abschwächung aller AusgangssignaleTasten DER Fernbedienung Hören möchtenInstallation ZUR Besonderen BeachtungAnschluss DER Quellgeräte MIT CINCH-HOCHPEGELAUSGANG Anschluss Eines Quellgerätes MIT STEREO-XLR-AUSGANGKabelverbindungen FÜR DIE Einschaltsteuerung Power Control SV-234 Endverstärker Anschluss Eines Aufnahmegerätes Anschluss Zweier Zusätzlicher EndstufenkanäleAnschluss DER Lautsprecher Anschluss DES Netzkabels Bedienung DES Gerätes Und REC Output 13 werden kleiner Und die Lautstärkeschritte sind zu grobGain Helligkeit derWeitere Tipps Einspielzeit/AufwärmenNetzbrummen Symptom Mögliche Fehlerursache Abhilfe FehlersucheTechnische Daten LEXIKON/WISSENSWERTES Audio-Quellen/Audio-QuellgeräteSafety Guidelines Other Instructions Included in Delivery Description of the ApplianceFront View If desired, you can connect a recording device Rear ViewSpeaker Loudspeaker terminals PRE Output Preamplifier OutputBatteries Remote ControlUsing batteries Old NewMute Buttons of the Remote ControlLevel and Level Volume keys Input Selector ButtonsProtective caps Do not connect PRE OUT and MainSpeaker cable connections RCA connectionsConnection of ONE Audio Source with XLR Output Connections for the Standby Control Power Control SV-234 is intended to react to the trigger signal Connection of a Recording Device Connection of TWO Additional Main Amplifier ChannelsConnection of the Loudspeakers Connection of the Power Cable Operating the Appliance PRE Output 14 is smaller Signal output of the preamplifier PRE OutputCorresponding remote controller buttons as well as using Gain -08dB ← ... → Gain -00dBTips Burn in/ Warm upNet frequency noise Search for Errors Symptom Possible Cause CountermeasureTechnical Specifications Glossary Audio Sources/Source devicesCâble dalimentation/Branchement Consignes DE SecuriteEntretien/Modifications Humidité/Chaleur/VibrationsSigle CE Explication des symboles graphiquesAutres Consignes Explications/RemarquesObjet DE LA Livraison Description DE LappareilLEVEL/ touches de volume Facade AvantAffichage Facade Arriere Speaker bornes de raccordementInput Balanced entrée XLR Telecommande PilesTouches DE LA Télécommande Level et Level touches de volumeQuand l’entrée Line 5 Main Input est sélec- 19 tionnée Prises RCA Pas de nécessité de liaison préampli, ampli de puissanceDépose du capot de protection Fiches de raccordementsRaccordement D’UN Appareil Source Avec LA Sortie STEREO-XLR Amplificateur stéréo SV-234 Par ex. amplificateur Raccordement D’UN Appareil D’ENREGISTREMENT Branchement DES HAUT-PARLEURS Branchement DU Câble Dalimentation Commandes DE L‘APPAREIL 8dB amortissement Le volume a été augmentéProgressivité du réglage est trop grossière De niveauRonflement du secteur ConseilsTemps de rodage / échauffement ’expérience montre que ce phénomène est soit dûResolution DE Problemes Symptôme Cause possible du défaut RemèdeCaracteristiques Techniques Lexique / BON a Savoir Sources audio/lecteurs sourcesVincent

SV-234 specifications

The Vincent Audio SV-234 is a high-end integrated amplifier that embodies a blend of modern technology and classic audio performance, appealing to both audiophiles and casual listeners alike. This sophisticated device is designed to provide pure, dynamic sound reproduction while integrating seamlessly with various audio sources and systems.

One of the key features of the SV-234 is its dual-mono design, which enhances soundstage and imaging. The separate amplifier sections for left and right channels ensure minimal crosstalk, leading to a more immersive listening experience. This design principle is essential for delivering a clean and accurate audio signal, effectively minimizing distortion and maximizing fidelity.

The amplifier boasts an impressive power output, rated at 2 x 150 watts into 8 ohms and 2 x 240 watts into 4 ohms. This significant power output allows the SV-234 to drive a wide range of speakers effortlessly, making it suitable for various configurations, from compact bookshelf speakers to larger floor-standing models. In addition to power, the unit's class AB amplification technology provides a warm and engaging sound that appeals to discerning listeners.

In terms of connectivity, the Vincent Audio SV-234 is equipped with an array of inputs, including multiple line-level analog inputs, a phono input for turntables, and digital inputs, including USB, coaxial, and optical. This extensive selection makes it easy for users to integrate the amplifier into their existing audio setup, allowing for playback from various sources, such as CD players, streaming devices, and computers.

The SV-234 is also designed with user-friendly features, such as a remote control and a clear, intuitive front panel layout. The built-in digital-to-analog converter (DAC) enhances sound quality when using digital sources, ensuring that users receive the best possible listening experience regardless of the input method.

In terms of build quality, the SV-234 features a sturdy, elegant chassis that is both aesthetically pleasing and robust enough to withstand everyday use. The combination of high-quality components and innovative technologies makes this amplifier a testament to Vincent Audio's commitment to creating exceptional audio products.

Ultimately, the Vincent Audio SV-234 is a remarkable integrated amplifier that combines power, versatility, and exceptional sound quality. Its advanced features and thoughtful design make it an ideal choice for anyone seeking to elevate their audio experience.