Vincent Audio manuel dutilisation SV-234 is intended to react to the trigger signal

Page 34

If you don't wish to use this function or if the other components do not support it, all you have to do is leave out these cable connections.

The SV-234 is equipped with one input connector and two output connectors for the power control. As a result, this amplifier can supply and transmit the switching signal for other components in the system as well as accept it from other components. Both cases are described in the following.

(1) The complete system is to be switched on/off at the SV-234 POWER button

In this situation the input in the terminal "POWER CONTROL" (15) must not be occupied and must be left open. Two HiFi components that are able to react to the power control signal can be connected directly to the amplifier's power control outputs. If more than two devices, which can be controlled, are to be con- nected, then it is necessary, to make the power control connection between the preamplifier and these furt- her devices through the outputs of the two devices which are connected directly. For that reason, every HiFi component that accepts power control signals is also equipped with a power control output. Thus, in theory it is possible to provide an infinite number of HiFi components with the power control signal. This approach, to loop a signal through a chain of components, is commonly referred to as "daisy chaining".

SV-234

e.g. main amplifier

(2) The SV-234 is intended to react to the trigger signal

If, for example, two output channels of a preamplifier are connected to the main input "LINE5", if this HiFi component can supply a power control signal and if you want the amplifier SV-234 to switch on/off synchronously with the component attached to "LINE5", one power control output of this component must be connected to the input in the SV-234 terminal "POWER CONTROL" (15). The connector at the sourcing HiFi component may as well be labelled with "TRIGGER OUTPUT". Both power control outputs of the SV-234 can additionally be used to forward the received switching signal to other components of your system.

SV-234

e.g. AV preamplifier

34Vincent

Image 34

Contents Vincent Dear Customer Sehr geehrter KundeCher client INHALTSVERZEICHNIS/CONTENTS/SOMMAIRE Netzkabel/Anschluss Wartung/VeränderungenAlle Betriebsmittel, die an die Netzspannung Aus/AnschaltenCE-Zeichen Erläuterung der grafischen SymboleWeitere Hinweise Erklärungen/HinweiseLieferumfang Beschreibung DES GerätesAnzeige Power NetzschalterVorderansicht LEVEL/ LautstärketastenPower Control RückansichtFernbedienung BatterienEingangswahltasten Gain Taste für -8dB Abschwächung aller AusgangssignaleTasten DER Fernbedienung Hören möchtenInstallation ZUR Besonderen BeachtungAnschluss DER Quellgeräte MIT CINCH-HOCHPEGELAUSGANG Anschluss Eines Quellgerätes MIT STEREO-XLR-AUSGANGKabelverbindungen FÜR DIE Einschaltsteuerung Power Control SV-234 Endverstärker Anschluss Eines Aufnahmegerätes Anschluss Zweier Zusätzlicher EndstufenkanäleAnschluss DER Lautsprecher Anschluss DES Netzkabels Bedienung DES Gerätes Und REC Output 13 werden kleiner Und die Lautstärkeschritte sind zu grobGain Helligkeit derEinspielzeit/Aufwärmen Weitere TippsNetzbrummen Symptom Mögliche Fehlerursache Abhilfe FehlersucheTechnische Daten LEXIKON/WISSENSWERTES Audio-Quellen/Audio-QuellgeräteSafety Guidelines Other Instructions Included in Delivery Description of the ApplianceFront View If desired, you can connect a recording device Rear ViewSpeaker Loudspeaker terminals PRE Output Preamplifier OutputBatteries Remote ControlUsing batteries Old NewMute Buttons of the Remote ControlLevel and Level Volume keys Input Selector Buttons Protective caps Do not connect PRE OUT and Main Speaker cable connections RCA connectionsConnection of ONE Audio Source with XLR Output Connections for the Standby Control Power Control SV-234 is intended to react to the trigger signal Connection of a Recording Device Connection of TWO Additional Main Amplifier ChannelsConnection of the Loudspeakers Connection of the Power Cable Operating the Appliance PRE Output 14 is smaller Signal output of the preamplifier PRE OutputCorresponding remote controller buttons as well as using Gain -08dB ← ... → Gain -00dBBurn in/ Warm up TipsNet frequency noise Search for Errors Symptom Possible Cause CountermeasureTechnical Specifications Glossary Audio Sources/Source devicesCâble dalimentation/Branchement Consignes DE SecuriteEntretien/Modifications Humidité/Chaleur/VibrationsSigle CE Explication des symboles graphiquesAutres Consignes Explications/RemarquesObjet DE LA Livraison Description DE LappareilFacade Avant LEVEL/ touches de volumeAffichage Speaker bornes de raccordement Facade ArriereInput Balanced entrée XLR Telecommande PilesLevel et Level touches de volume Touches DE LA TélécommandeQuand l’entrée Line 5 Main Input est sélec- 19 tionnée Prises RCA Pas de nécessité de liaison préampli, ampli de puissanceDépose du capot de protection Fiches de raccordementsRaccordement D’UN Appareil Source Avec LA Sortie STEREO-XLR Amplificateur stéréo SV-234 Par ex. amplificateur Raccordement D’UN Appareil D’ENREGISTREMENT Branchement DES HAUT-PARLEURS Branchement DU Câble Dalimentation Commandes DE L‘APPAREIL 8dB amortissement Le volume a été augmentéProgressivité du réglage est trop grossière De niveauRonflement du secteur ConseilsTemps de rodage / échauffement ’expérience montre que ce phénomène est soit dûResolution DE Problemes Symptôme Cause possible du défaut RemèdeCaracteristiques Techniques Lexique / BON a Savoir Sources audio/lecteurs sourcesVincent