Vincent Audio SV-234 manuel dutilisation Search for Errors, Symptom Possible Cause Countermeasure

Page 41

SEARCH FOR ERRORS

Symptom

Possible Cause

Countermeasure

 

 

 

Unit does not work

Mains cable is not connected to a suitable

Connect to a functioning socket using a

after pressing the

mains wall outlet.

suitable mains voltage.

power button

Mains cable has not been firmly inserted into

Check the power cable. If necessary,

 

wall power socket and the device’s socket.

exchange it with a suitable mains cable

 

Otherwise it may be defective.

and push its plug firmly into wall socket and

 

 

the device's power connector.

 

Unit fuse or unit is defective.

Contact your dealer.

 

 

 

No sound on both

The currently selected audio source

Switch on the source unit and begin playback.

channels although

(10)(11)(12) is giving no signal.

 

 

 

the unit is ready for

The output of the source device is not connec-

Correct the connection.

use (front panel

ted or is wrongly connected e.g. not connected

 

display is functional)

to the selected input channel terminal of

 

the amplifier.

 

 

 

 

Wrong input channel has been selected at

Set the amplifier to the input that your

 

the amplifier.

desired source is connected to (10)(11)(12).

 

Volume (LEVEL) is set too low.

Carefully increase the volume (3)(19).

 

The amplifier is muted (MUTE-Function).

Deactivate the MUTE function (17) after, as

 

 

a precaution, reducing the volume level.

 

The output of the speaker pair you want to

After, as a precaution, reducing the volume

 

use has not been activated.

level, press the "SPEAKER A/B" button (1)

 

 

associated to the speaker output used, so that

 

 

the LED next to the key is illuminated.

 

The speaker cable is not properly connected

Check and tighten the speaker cables at the

 

to the amplifier's terminal. Otherwise it may

amplifier and the speakers.

 

be defective.

 

 

 

 

No audio playback

The source equipment is giving signal on

Check the audio source. You can try to use it

on one channel

only one channel.

at a different amplifier for a test.

 

One of the signal cables between audio source

Check the cable connections, tighten them

 

and amplifier inputs has not yet been plugged

if necessary.

 

in or is defective.

 

 

Channel balance has been set to the extreme

Set the channel balance to a reasonable value.

 

right or left.

 

 

One of the speaker cables is not correctly

Check and refasten the speaker cables at the

 

connected or is defective.

speaker terminal of the amplifier and at the

 

 

speaker’s connectors. The cables coming

 

 

from both the speakers of a speaker pair must

 

 

not be connected to different terminal sets (e.g.

 

 

one A and one B) on the back of the amplifier.

 

 

 

Vincent 41

Image 41
Contents Vincent Cher client Sehr geehrter KundeDear Customer INHALTSVERZEICHNIS/CONTENTS/SOMMAIRE Alle Betriebsmittel, die an die Netzspannung Wartung/VeränderungenNetzkabel/Anschluss Aus/AnschaltenWeitere Hinweise Erläuterung der grafischen SymboleCE-Zeichen Erklärungen/HinweiseBeschreibung DES Gerätes LieferumfangVorderansicht Power NetzschalterAnzeige LEVEL/ LautstärketastenRückansicht Power ControlBatterien FernbedienungTasten DER Fernbedienung Gain Taste für -8dB Abschwächung aller AusgangssignaleEingangswahltasten Hören möchtenZUR Besonderen Beachtung InstallationAnschluss Eines Quellgerätes MIT STEREO-XLR-AUSGANG Anschluss DER Quellgeräte MIT CINCH-HOCHPEGELAUSGANGKabelverbindungen FÜR DIE Einschaltsteuerung Power Control SV-234 Endverstärker Anschluss Zweier Zusätzlicher Endstufenkanäle Anschluss Eines AufnahmegerätesAnschluss DER Lautsprecher Anschluss DES Netzkabels Bedienung DES Gerätes Gain Und die Lautstärkeschritte sind zu grobUnd REC Output 13 werden kleiner Helligkeit derNetzbrummen Weitere TippsEinspielzeit/Aufwärmen Fehlersuche Symptom Mögliche Fehlerursache AbhilfeTechnische Daten Audio-Quellen/Audio-Quellgeräte LEXIKON/WISSENSWERTESSafety Guidelines Other Instructions Description of the Appliance Included in DeliveryFront View Speaker Loudspeaker terminals Rear ViewIf desired, you can connect a recording device PRE Output Preamplifier OutputUsing batteries Remote ControlBatteries Old NewLevel and Level Volume keys Buttons of the Remote ControlMute Input Selector ButtonsSpeaker cable connections Do not connect PRE OUT and MainProtective caps RCA connectionsConnection of ONE Audio Source with XLR Output Connections for the Standby Control Power Control SV-234 is intended to react to the trigger signal Connection of TWO Additional Main Amplifier Channels Connection of a Recording DeviceConnection of the Loudspeakers Connection of the Power Cable Operating the Appliance Corresponding remote controller buttons as well as using Signal output of the preamplifier PRE OutputPRE Output 14 is smaller Gain -08dB ← ... → Gain -00dBNet frequency noise TipsBurn in/ Warm up Symptom Possible Cause Countermeasure Search for ErrorsTechnical Specifications Audio Sources/Source devices GlossaryEntretien/Modifications Consignes DE SecuriteCâble dalimentation/Branchement Humidité/Chaleur/VibrationsAutres Consignes Explication des symboles graphiquesSigle CE Explications/RemarquesDescription DE Lappareil Objet DE LA LivraisonAffichage LEVEL/ touches de volumeFacade Avant Input Balanced entrée XLR Facade ArriereSpeaker bornes de raccordement Piles TelecommandeQuand l’entrée Line 5 Main Input est sélec- 19 tionnée Touches DE LA TélécommandeLevel et Level touches de volume Dépose du capot de protection Pas de nécessité de liaison préampli, ampli de puissancePrises RCA Fiches de raccordementsRaccordement D’UN Appareil Source Avec LA Sortie STEREO-XLR Amplificateur stéréo SV-234 Par ex. amplificateur Raccordement D’UN Appareil D’ENREGISTREMENT Branchement DES HAUT-PARLEURS Branchement DU Câble Dalimentation Commandes DE L‘APPAREIL Progressivité du réglage est trop grossière Le volume a été augmenté8dB amortissement De niveauTemps de rodage / échauffement ConseilsRonflement du secteur ’expérience montre que ce phénomène est soit dûSymptôme Cause possible du défaut Remède Resolution DE ProblemesCaracteristiques Techniques Sources audio/lecteurs sources Lexique / BON a SavoirVincent

SV-234 specifications

The Vincent Audio SV-234 is a high-end integrated amplifier that embodies a blend of modern technology and classic audio performance, appealing to both audiophiles and casual listeners alike. This sophisticated device is designed to provide pure, dynamic sound reproduction while integrating seamlessly with various audio sources and systems.

One of the key features of the SV-234 is its dual-mono design, which enhances soundstage and imaging. The separate amplifier sections for left and right channels ensure minimal crosstalk, leading to a more immersive listening experience. This design principle is essential for delivering a clean and accurate audio signal, effectively minimizing distortion and maximizing fidelity.

The amplifier boasts an impressive power output, rated at 2 x 150 watts into 8 ohms and 2 x 240 watts into 4 ohms. This significant power output allows the SV-234 to drive a wide range of speakers effortlessly, making it suitable for various configurations, from compact bookshelf speakers to larger floor-standing models. In addition to power, the unit's class AB amplification technology provides a warm and engaging sound that appeals to discerning listeners.

In terms of connectivity, the Vincent Audio SV-234 is equipped with an array of inputs, including multiple line-level analog inputs, a phono input for turntables, and digital inputs, including USB, coaxial, and optical. This extensive selection makes it easy for users to integrate the amplifier into their existing audio setup, allowing for playback from various sources, such as CD players, streaming devices, and computers.

The SV-234 is also designed with user-friendly features, such as a remote control and a clear, intuitive front panel layout. The built-in digital-to-analog converter (DAC) enhances sound quality when using digital sources, ensuring that users receive the best possible listening experience regardless of the input method.

In terms of build quality, the SV-234 features a sturdy, elegant chassis that is both aesthetically pleasing and robust enough to withstand everyday use. The combination of high-quality components and innovative technologies makes this amplifier a testament to Vincent Audio's commitment to creating exceptional audio products.

Ultimately, the Vincent Audio SV-234 is a remarkable integrated amplifier that combines power, versatility, and exceptional sound quality. Its advanced features and thoughtful design make it an ideal choice for anyone seeking to elevate their audio experience.